README.md 11.8 KB
Newer Older
1 2 3
ASDF: Another System Definition Facility
========================================

Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
4
For general information about ASDF, consult the web page:
5 6
<https://common-lisp.net/project/asdf/>

Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
7
For instructions on how to use it, read the manual:
8 9
<https://common-lisp.net/project/asdf/asdf.html>

Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
10
Below is a guide for ASDF developers; it is not meant for ASDF users.
11 12 13 14 15 16 17

[TOC]


Building ASDF
-------------

Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
18
First, make sure ASDF is checked out under a path registered to the source-registry,
19 20 21 22 23 24 25 26 27 28
if that isn't the case yet (see the [manual](http://common-lisp.net/project/asdf/asdf.html)).
One place would be:

    ~/.local/share/common-lisp/source/asdf/

or, assuming your implementation provides ASDF 3.1 or later:

    ~/common-lisp/asdf/


Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
29
If you cloned our git repository rather than extracted a tarball,
30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73
bootstrap a copy of `build/asdf.lisp` with:

    make


Building the documentation
--------------------------

The manual is also in the [doc/](doc/) subdirectory, and can be prepared with:

    make -C doc


Testing ASDF
------------

Before you may run tests, you need a few CL libraries.
The simplest way to get them is as follows, but read below:

    make ext

_NOTA BENE_: You may also need to run `make ext` again
after you `git pull` or switch branch, to update the `ext/` directory.
This unhappily is not automatic.
If for some reason tests fail, particularly due to an error
compiling, loading or running a library, then run `make ext` and try again.

The above `make` target uses `git submodule update --init` to download
all these libraries using git. If you don't otherwise maintain your
own set of carefully controlled CL libraries, that's what you want to use.
However, it is only available if you have a git checkout of ASDF;
not if you used a tarball.
If you use a tarball or otherwise do maintain your own set
of carefully controlled CL libraries then you will want to use whichever tools
you use (e.g. `quicklisp`, `clbuild`, or your own scripts around `git`)
to download these libraries:
`alexandria`, `asdf-encodings`, `cl-launch`, `closer-mop`, `cl-ppcre`,
`cl-scripting`, `fare-mop`, `fare-quasiquote`, `fare-utils`, `inferior-shell`,
`lisp-invocation`, `named-readtables`, `optima`.

If you are a CL developer, you may already have them, or may want
to use your own tools to download a version of them you control.
If you use [Quicklisp](https://www.quicklisp.org/), you may let
Quicklisp download those you don't have.
Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
74 75
In these cases, you may NOT want to use the git submodules from `make ext`;
you may undo a `make ext` with `make noext`.
76
Otherwise, if you want to let ASDF download known-working versions
Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
77
of its dependencies, you can do it with `make ext`.
78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95

Once you have all the required libraries and the asdf-tools script can find
a suitable Common Lisp implementation, you may run all the tests
on a given Common Lisp implementation `$L`, with your favorite installed system `$S`, using:

    make t u l=$L s=$S

To run only the regression test scripts, try simply:

    make l=$L test-scripts


Lisp Scripting test system
--------------------------

ASDF by default uses a shell script in `./test/run-tests.sh` to run the scripts
that orchestrate its tests.

Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
96 97 98 99 100 101 102
An alternate build and test system is available
that uses Common Lisp as a scripting language.
It is disabled by default because
the new maintainer is having trouble with it in some of his environments.
It worked fine for the previous maintainer in his environments,
and may be particularly useful on Windows if and when
the shell-based test system fails or is not available.
103
Its source code is in [tools/](tools/) and
Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
104 105
you can invoke it without going through GNU make,
using the script [make-asdf.sh](make-asdf.sh),
106 107 108 109 110 111 112
or, on Windows, [make-asdf.bat](make-asdf.bat).

To use this alternate test system, pass to `make` the extra arguments `-f Makefile-lisp-scripting`
as in for instance:

    make -f Makefile-lisp-scripting t l=sbcl

113 114
Or you can make that your local default (assuming GNU make) using:

115
    echo "include Makefile-lisp-scripting" > GNUmakefile
116

117 118 119 120 121 122 123 124 125 126 127
These Lisp tools by default use Clozure Common Lisp (CCL) to build and run a binary
`build/asdf-tools` that will orchestrate the tests.
By defining and exporting the variable `LISP` to be one of `ccl`, `sbcl` or `allegro`, you
can have it use an alternate Common Lisp implementation instead.
Install CCL (respectively SBCL or Allegro) and make sure an executable called
`ccl` (respectively `sbcl` or `alisp`) is in your `PATH`,
or that you export a variable `CCL` (respectively `SBCL` or `ALLEGRO`)
that points to the executable.
To use a further Common Lisp implementation, suitably edit the script
[`tools/asdf-tools`](tools/asdf-tools),
or, on Windows, the batch file [`tools/asdf-tools.bat`](tools/asdf-tools.bat).
Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
128
(Note that we recommend SBCL 1.3.13 or later when on Windows.)
129

Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
130 131 132 133
Note that the executable `build/asdf-tools` is built
the first time you test ASDF.
When you update ASDF, via e.g. `git pull` or a branch switch,
you may have to update it, with:
134 135 136 137 138 139 140 141 142 143

    make -f Makefile-lisp-scripting build-asdf-tools

The reason this is not done automatically every time is because
building it depends on a working ASDF;
but when you're modifying ASDF and testing it, you cannot rely on a working ASDF:
indeed, a developer may not only make mistakes, but may deliberately
introduce or re-introduce bugs at some place to test code in another place.


Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
144 145
Debugging ASDF
--------------
146 147 148 149

To interactively debug ASDF, you may load it in such a way that `M-.` will work,
by installing the source code, and running:

Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
150
    (map () 'load (asdf:input-files :monolithic-concatenate-source-op "asdf"))
151 152 153 154

To interactively use the `asdf-tools`, you need to either have
all its dependencies installed and configured.
If you're using them through the `ext/` directory and `make ext`,
Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
155 156
then you may need to emulate
what the script in [tools/asdf-tools](tools/asdf-tools) does
157 158 159 160 161 162
with respect to initializing the source-registry.
Note that it also declares a system for `cl-launch/dispatch`;
you can either do something similar, or expand the source for `cl-launch` with
`make -C ext/cl-launch source` so `cl-launch.asd` will be created.


163 164 165 166 167 168 169 170 171 172
Using ASDF internals
--------------------

If you have to use or extend internal functionality not currently exported by
ASDF, please contact us and have us negociate a proper, stable, tested interface
that you can actually rely on. Also, please *DO NOT* refer to specific
subpackages such as `asdf/find-system` from the outside of ASDF, because
functions may occasionally be moved from one internal package to the other,
without notification. They have in the past and will in the future.
Instead, when refering to symbols in ASDF, we recommend you either have
Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
173 174
your package `:use` the package `:asdf` or `:import-from` it, or that
you shall use `asdf:` or `asdf::` as a prefix to the symbols.
175 176 177 178 179
And once again, please contact us if you have to use non-exported symbols.

Also, the normal way of extending ASDF is to use our class hierarchies for
`component` and `operation` and to define methods on `component-depends-on`,
`perform`, `input-files`, `output-files`.
Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
180 181
A common mistake seems to be that some people define methods on `operate`,
which usually is not at all what they think it is.
182 183


184 185 186
How do I navigate this source tree?
-----------------------------------

Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
187 188
*   [asdf.asd](asdf.asd)
    *   The system definition for building ASDF with ASDF.
189

Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
190 191 192 193 194 195 196
*   `*.lisp`
    *   The source code files for `asdf/defsystem`.
        See [asdf.asd](asdf.asd) for the order in which they are loaded.
        All exported functions should have docstrings,
        and all internal functions should have comments.
        If any definition is insufficiently documented,
        please tell us: that's a bug.
197

Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
198
*   [uiop/](uiop/)
199 200 201 202
    * Utilities of Implementation- and OS- Portability,
      the portability layer of ASDF. It has its own [README](uiop/README.md),
      and functions all have docstrings.

Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
203 204 205 206 207 208 209 210 211 212 213 214 215 216 217
*   [Makefile](Makefile)
    *   The classical `Makefile` used for development purposes.
        Regular users only need to call `make` with the default target.
        Developers will typically use the like of
        `make t l=sbcl` or `make u l=ccl`.

*   [bin/](bin/)
    *   [bump-version](bin/bump-version) --
        a script to bump the version of ASDF, used by the classic `Makefile`.
        Use it with e.g. `./bin/bump-version 3.3.0`
        to test with the next version number before you release.
        NB: ASDF's version number notably affect the behavior of ASDF
        with respect to deprecated functions.

*   [tools/](tools/)
218
    * `asdf-tools`, a system to build, test and release ASDF. It includes:
Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242
        *   [asdf-tools](tools/asdf-tools) --
            a shell script to run it as a shell command.
        *   [asdf-tools.bat](tools/asdf-tools.bat) --
            a Windows batch file to run the above.
        *   [asdf-tools.asd](tools/asdf-tools.asd) --
            system definition for asdf-tools
        *   `*.lisp` -- the source code for the `asdf-tools` system,
            except for the few files below.
    *   Also a couple scripts to help ASDF users:
        *   [load-asdf.lisp](tools/load-asdf.lisp) --
            a working example script to load, configure and use ASDF
            in a self-contained project
        *   [install-asdf.lisp](install-asdf.lisp) --
            replace and update an implementation's ASDF
        *   [cl-source-registry-cache.lisp](cl-source-registry-cache.lisp) --
            update a cache for the source-registry as a standalone script.

*   [Makefile-lisp-scripting](Makefile-lisp-scripting),
    [make-asdf.sh](make-asdf.sh) and [make-asdf.bat](make-asdf.bat)
    *   Minimal Makefile and scripts to invoke
        the lisp scripting variants of the build system.

*   [version.lisp-expr](version.lisp-expr)
    *   The current version. Bumped up every time the code changes, using:
243 244 245

            make bump

Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276
*   [doc/](doc/)
    *   Documentation for ASDF, including:
        *   [index.html](doc/index.html) --
            the web page for <http://common-lisp.net/project/asdf/>
        *   [asdf.texinfo](doc/asdf.texinfo) -- our manual
        *   [Makefile](doc/Makefile) -- how to build the manual
        *   [cclan.png](doc/cclan.png) [lisp-logo120x80.png](doc/lisp-logo120x80.png)
            [style.css](doc/style.css) [favicon.ico](doc/favicon.ico)
            -- auxiliaries of [index.html](doc/index.html)

*   [test/](test/)
    *   Regression test scripts (and ancillary files) for developers to check
        that they don't unintentionally break any of the functionality of ASDF.
        They are far from covering all of ASDF, but they are a good start.
        *   [script-support.lisp](test/script-support.lisp) --
            the common test infrastructure used by our tests
        *   [run-tests.sh](test/run-tests.sh) --
            the shell script used by the classic `Makefile` to run tests.
            It is not used by the Lisp scripting variant of the `Makefile`.

*   [contrib/](contrib/)
    *   A few contributed files that show case how to use ASDF
        or help with debugging it or debugging programs that use it.

*   [debian/](debian/)
    *   Files for packaging on Debian, Ubuntu, etc.
        (now only present in the debian branch).

*   [build/](build/)
    *   Where the `Makefile` and `asdf-tools` store their output files,
        including:
277
        * `asdf.lisp` -- the current one-file deliverable of ASDF
278 279
        * `asdf-*.lisp` -- for upgrade test purposes, old versions
        * `asdf-tools` -- the executable for asdf-tools (.exe on Windows)
280
        * `results/` -- logs of tests that have been run
281
        * `fasls/` -- output files while running tests
282

Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
283
*   [ext/](ext/)
284
    * External dependencies, that can be populated with `make ext`
285 286 287 288
      or equivalently with `git submodule update --init`.
      Depopulate it with `make noext`
	  or equivalently with: `submodule deinit .`

Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
289
*   [README.md](README.md)
290
    * This file.
291

Francois-Rene Rideau's avatar
Francois-Rene Rideau committed
292
*   [TODO](TODO)
293
    * Plenty of ideas for how to further improve ASDF.