;;; -*- Mode: Lisp; Log: code.log; Package: bignum -*-
;;;
;;; **********************************************************************
;;; This code was written as part of the CMU Common Lisp project at
;;; Carnegie Mellon University, and has been placed in the public domain.
;;;
(ext:file-comment
  "$Header: /Volumes/share2/src/cmucl/cvs2git/cvsroot/src/code/bignum.lisp,v 1.40 2004/08/31 00:19:41 rtoy Exp $")
;;;
;;; **********************************************************************
;;;
;;; This file contains code to implement bignum support.
;;;

(in-package "BIGNUM")
(use-package "KERNEL")

;;; These symbols define the interface to the number code.

(export '(add-bignums multiply-bignums negate-bignum subtract-bignum
	  multiply-bignum-and-fixnum multiply-fixnums
	  bignum-ashift-right bignum-ashift-left bignum-gcd
	  bignum-to-float bignum-integer-length
	  bignum-logical-and bignum-logical-ior bignum-logical-xor
	  bignum-logical-not bignum-load-byte bignum-deposit-byte
	  bignum-truncate bignum-plus-p bignum-compare make-small-bignum
	  bignum-logcount bignum-logbitp))

;;; These symbols define the interface to the compiler.

(export '(bignum-type bignum-element-type bignum-index %allocate-bignum
	  %bignum-length %bignum-set-length %bignum-ref %bignum-set
	  %digit-0-or-plusp %add-with-carry %subtract-with-borrow
	  %multiply-and-add %multiply %lognot %logand %logior %logxor
	  %fixnum-to-digit %floor %fixnum-digit-with-correct-sign %ashl
	  %ashr %digit-logical-shift-right))



;;;; Notes.

;;; The following interfaces will either be assembler routines or code sequences
;;; expanded into the code as basic bignum operations:
;;;    General:
;;;       %BIGNUM-LENGTH
;;;       %ALLOCATE-BIGNUM
;;;       %BIGNUM-REF
;;;       %NORMALIZE-BIGNUM
;;;       %BIGNUM-SET-LENGTH
;;;       %FIXNUM-DIGIT-WITH-CORRECT-SIGN
;;;       %SIGN-DIGIT
;;;	  %ASHR
;;;       %ASHL
;;;       %BIGNUM-0-OR-PLUSP
;;;       %DIGIT-LOGICAL-SHIFT-RIGHT
;;;    General (May not exist when done due to sole use in %-routines.)
;;;       %DIGIT-0-OR-PLUSP
;;;    Addition:
;;;       %ADD-WITH-CARRY
;;;    Subtraction:
;;;       %SUBTRACT-WITH-BORROW
;;;    Multiplication
;;;       %MULTIPLY
;;;    Negation
;;;       %LOGNOT
;;;    Shifting (in place)
;;;       %NORMALIZE-BIGNUM-BUFFER
;;;    GCD/Relational operators:
;;;       %DIGIT-COMPARE
;;;       %DIGIT-GREATER
;;;    Relational operators:
;;;       %LOGAND
;;;       %LOGIOR
;;;       %LOGXOR
;;;    LDB
;;;       %FIXNUM-TO-DIGIT
;;;    TRUNCATE
;;;       %FLOOR
;;;
;;;
;;; Note: The floating routines know about the float representation.
;;;
;;; PROBLEM 1:
;;; There might be a problem with various LET's and parameters that take a
;;; digit value.  We need to write these so those things stay in 32-bit
;;; registers and number stack slots.  I bind locals to these values, and I
;;; use function on them -- ZEROP, ASH, etc.
;;;
;;; PROBLEM 2:
;;; In shifting and byte operations, I use masks and logical operations that
;;; could result in intermediate bignums.  This is hidden by the current system,
;;; but I may need to write these in a way that keeps these masks and logical
;;; operations from diving into the Lisp level bignum code.
;;;
;;; To do:
;;;    fixnums
;;;       logior, logxor, logand
;;;       depending on relationals, < (twice) and <= (twice)
;;;          or write compare thing (twice).
;;;       LDB on fixnum with bignum result.
;;;       DPB on fixnum with bignum result.
;;;       TRUNCATE returns zero or one as one value and fixnum or minus fixnum
;;;          for the other value when given (truncate fixnum bignum).
;;;          Returns (truncate bignum fixnum) otherwise.
;;;       addition
;;;       subtraction (twice)
;;;       multiply
;;;       GCD
;;;    write MASK-FIELD and DEPOSIT-FIELD in terms of logical operations.
;;;    DIVIDE
;;;       IF (/ x y) with bignums:
;;;          do the truncate, and if rem is 0, return quotient.
;;;          if rem is non-0
;;;	     gcd of x and y.
;;;	     "truncate" each by gcd, ignoring remainder 0.
;;;	     form ratio of each result, bottom is positive.
;;;



;;;; What's a bignum?

(eval-when (compile load eval) ;Necessary for DEFTYPE.

(defconstant digit-size #+amd64 64 #-amd64 32)

(defconstant maximum-bignum-length (1- (ash 1 (- 32 vm:type-bits))))

) ;eval-when



;;;; Internal inline routines.

;;; %ALLOCATE-BIGNUM must zero all elements.
;;;
(defun %allocate-bignum (length)
  (declare (type bignum-index length))
  (%allocate-bignum length))

;;; Extract the length of the bignum.
;;; 
(defun %bignum-length (bignum)
  (declare (type bignum-type bignum))
  (%bignum-length bignum))

;;; %BIGNUM-REF needs to access bignums as obviously as possible, and it needs
;;; to be able to return 32 bits somewhere no one looks for real objects.
;;;
(defun %bignum-ref (bignum i)
  (declare (type bignum-type bignum)
	   (type bignum-index i))
  (%bignum-ref bignum i))
;;;
(defun %bignum-set (bignum i value)
  (declare (type bignum-type bignum)
	   (type bignum-index i)
	   (type bignum-element-type value))
  (%bignum-set bignum i value))
;;;
(defsetf %bignum-ref %bignum-set)

;;; Return T if digit is positive, or NIL if negative.
;;;
(defun %digit-0-or-plusp (digit)
  (declare (type bignum-element-type digit))
  (not (logbitp (1- digit-size) digit)))

(declaim (inline %bignum-0-or-plusp))
(defun %bignum-0-or-plusp (bignum len)
  (declare (type bignum-type bignum)
	   (type bignum-index len))
  (%digit-0-or-plusp (%bignum-ref bignum (1- len))))

;;; %ADD-WITH-CARRY -- Internal.
;;;
;;; This should be in assembler, and should not cons intermediate results.  It
;;; returns a 32bit digit and a carry resulting from adding together a, b, and
;;; an incoming carry.
;;;
(defun %add-with-carry (a b carry)
  (declare (type bignum-element-type a b)
	   (type (mod 2) carry))
  (%add-with-carry a b carry))

;;; %SUBTRACT-WITH-BORROW -- Internal.
;;;
;;; This should be in assembler, and should not cons intermediate results.  It
;;; returns a 32bit digit and a borrow resulting from subtracting b from a, and
;;; subtracting a possible incoming borrow.
;;;
;;; We really do:  a - b - 1 + borrow, where borrow is either 0 or 1.
;;; 
(defun %subtract-with-borrow (a b borrow)
  (declare (type bignum-element-type a b)
	   (type (mod 2) borrow))
  (%subtract-with-borrow a b borrow))

;;; %MULTIPLY -- Internal.
;;;
;;; This multiplies two digit-size (32-bit) numbers, returning a 64-bit result
;;; split into two 32-bit quantities.
;;;
(defun %multiply (x y)
  (declare (type bignum-element-type x y))
  (%multiply x y))

;;; %MULTIPLY-AND-ADD  --  Internal.
;;;
;;; This multiplies x-digit and y-digit, producing high and low digits
;;; manifesting the result.  Then it adds the low digit, res-digit, and
;;; carry-in-digit.  Any carries (note, you still have to add two digits at a
;;; time possibly producing two carries) from adding these three digits get
;;; added to the high digit from the multiply, producing the next carry digit.
;;; Res-digit is optional since two uses of this primitive multiplies a single
;;; digit bignum by a multiple digit bignum, and in this situation there is no
;;; need for a result buffer accumulating partial results which is where the
;;; res-digit comes from.
;;;
(defun %multiply-and-add (x-digit y-digit carry-in-digit &optional (res-digit 0))
  (declare (type bignum-element-type x-digit y-digit res-digit carry-in-digit))
  (%multiply-and-add x-digit y-digit carry-in-digit res-digit))

;;; %LOGNOT -- Internal.
;;;
(defun %lognot (digit)
  (declare (type bignum-element-type digit))
  (%lognot digit))

;;; %LOGAND -- Internal.
;;; %LOGIOR -- Internal.
;;; %LOGXOR -- Internal.
;;;
;;; Do the 32bit unsigned op.
;;;
(declaim (inline %logand %logior %logxor))
(defun %logand (a b)
  (declare (type bignum-element-type a b))
  (logand a b))
(defun %logior (a b)
  (declare (type bignum-element-type a b))
  (logior a b))
(defun %logxor (a b)
  (declare (type bignum-element-type a b))
  (logxor a b))

;;; %FIXNUM-TO-DIGIT -- Internal.
;;;
;;; This takes a fixnum and sets it up as an unsigned 32-bit quantity.  In
;;; the new system this will mean shifting it right two bits.
;;;
(defun %fixnum-to-digit (x)
  (declare (fixnum x))
  (logand x (1- (ash 1 digit-size))))

#-32x16-divide
;;; %FLOOR -- Internal.
;;;
;;; This takes three digits and returns the FLOOR'ed result of dividing the
;;; first two as a 64-bit integer by the third.
;;;
;;; DO WEIRD let AND setq STUFF TO SLIME THE COMPILER INTO ALLOWING THE %FLOOR
;;; TRANSFORM TO EXPAND INTO PSEUDO-ASSEMBLER FOR WHICH THE COMPILER CAN LATER
;;; CORRECTLY ALLOCATE REGISTERS.
;;;
(defun %floor (a b c)
  (let ((a a) (b b) (c c))
    (declare (type bignum-element-type a b c))
    (setq a a b b c c)
    (%floor a b c)))


;;; %FIXNUM-DIGIT-WITH-CORRECT-SIGN -- Internal.
;;;
;;; Convert the digit to a regular integer assuming that the digit is signed.
;;;
(defun %fixnum-digit-with-correct-sign (digit)
  (declare (type bignum-element-type digit))
  (if (logbitp (1- digit-size) digit)
      (logior digit (ash -1 digit-size))
      digit))

;;; %ASHR -- Internal.
;;;
;;; Do an arithmetic shift right of data even though bignum-element-type is
;;; unsigned.
;;;
(defun %ashr (data count)
  (declare (type bignum-element-type data)
	   (type (mod #+amd64 64 #-amd64 32) count))
  (%ashr data count))

;;; %ASHL -- Internal.
;;;
;;; This takes a 32-bit quantity and shifts it to the left, returning a 32-bit
;;; quantity.
(defun %ashl (data count)
  (declare (type bignum-element-type data)
	   (type (mod 32) count))
  (%ashl data count))

;;; %DIGIT-LOGICAL-SHIFT-RIGHT  --  Internal
;;;
;;;    Do an unsigned (logical) right shift of a digit by Count.
;;;
(defun %digit-logical-shift-right (data count)
  (declare (type bignum-element-type data)
	   (type (mod 32) count))
  (%digit-logical-shift-right data count))


;;; %BIGNUM-SET-LENGTH -- Internal.
;;;
;;; Change the length of bignum to be newlen.  Newlen must be the same or
;;; smaller than the old length, and any elements beyond newlen must be zeroed.
;;; 
(defun %bignum-set-length (bignum newlen)
  (declare (type bignum-type bignum)
	   (type bignum-index newlen))
  (%bignum-set-length bignum newlen))

;;; %SIGN-DIGIT -- Internal.
;;;
;;; This returns 0 or "-1" depending on whether the bignum is positive.  This
;;; is suitable for infinite sign extension to complete additions,
;;; subtractions, negations, etc.  This cannot return a -1 represented as
;;; a negative fixnum since it would then have to low zeros.
;;;
(declaim (inline %sign-digit))
(defun %sign-digit (bignum len)
  (declare (type bignum-type bignum)
	   (type bignum-index len))
  (%ashr (%bignum-ref bignum (1- len)) (1- digit-size)))



;;; %DIGIT-COMPARE and %DIGIT-GREATER -- Internal.
;;;
;;; These take two 32 bit quantities and compare or contrast them without
;;; wasting time with incorrect type checking.
;;;
(declaim (inline %digit-compare %digit-greater))
(defun %digit-compare (x y)
  (= x y))
;;;
(defun %digit-greater (x y)
  (> x y))


(declaim (optimize (speed 3) (safety 0)(ext:inhibit-warnings 3)))


;;;; Addition.

(defun add-bignums (a b)
  (declare (type bignum-type a b))
  (let ((len-a (%bignum-length a))
	(len-b (%bignum-length b)))
    (declare (type bignum-index len-a len-b))
    (multiple-value-bind (a len-a b len-b)
			 (if (> len-a len-b)
			     (values a len-a b len-b)
			     (values b len-b a len-a))
      (declare (type bignum-type a b)
	       (type bignum-index len-a len-b))
      (let* ((len-res (1+ len-a))
	     (res (%allocate-bignum len-res))
	     (carry 0))
	(declare (type bignum-index len-res)
		 (type bignum-type res)
		 (type (mod 2) carry))
	(dotimes (i len-b)
	  (declare (type bignum-index i))
	  (multiple-value-bind
	      (v k)
	      (%add-with-carry (%bignum-ref a i) (%bignum-ref b i) carry)
	    (declare (type bignum-element-type v)
		     (type (mod 2) k))
	    (setf (%bignum-ref res i) v)
	    (setf carry k)))
	(if (/= len-a len-b)
	    (finish-add a res carry (%sign-digit b len-b) len-b len-a)
	    (setf (%bignum-ref res len-a)
		  (%add-with-carry (%sign-digit a len-a)
				   (%sign-digit b len-b)
				   carry)))
	(%normalize-bignum res len-res)))))

;;; FINISH-ADD -- Internal.
;;;
;;; This takes the longer of two bignums and propagates the carry through its
;;; remaining high order digits.
;;;
(defun finish-add (a res carry sign-digit-b start end)
  (declare (type bignum-type a res)
	   (type (mod 2) carry)
	   (type bignum-element-type sign-digit-b)
	   (type bignum-index start end))
  (do ((i start (1+ i)))
      ((= i end)
       (setf (%bignum-ref res end)
	     (%add-with-carry (%sign-digit a end) sign-digit-b carry)))
    (declare (type bignum-index i))
    (multiple-value-bind (v k)
			 (%add-with-carry (%bignum-ref a i) sign-digit-b carry)
      (setf (%bignum-ref res i) v)
      (setf carry k)))
  (ext:undefined-value))


;;;; Subtraction.

(eval-when (compile eval)

;;; SUBTRACT-BIGNUM-LOOP -- Internal.
;;;
;;; This subtracts b from a plugging result into res.  Return-fun is the
;;; function to call that fixes up the result returning any useful values, such
;;; as the result.  This macro may evaluate its arguments more than once.
;;;
(defmacro subtract-bignum-loop (a len-a b len-b res len-res return-fun)
  (let ((borrow (gensym))
	(a-digit (gensym))
	(a-sign (gensym))
	(b-digit (gensym))
	(b-sign (gensym))
	(i (gensym))
	(v (gensym))
	(k (gensym)))
    `(let* ((,borrow 1)
	    (,a-sign (%sign-digit ,a ,len-a))
	    (,b-sign (%sign-digit ,b ,len-b)))
       (declare (type bignum-element-type ,a-sign ,b-sign))
       (dotimes (,i ,len-res)
	 (declare (type bignum-index ,i))
	 (let ((,a-digit (if (< ,i ,len-a) (%bignum-ref ,a ,i) ,a-sign))
	       (,b-digit (if (< ,i ,len-b) (%bignum-ref ,b ,i) ,b-sign)))
	   (declare (type bignum-element-type ,a-digit ,b-digit))
	   (multiple-value-bind
	       (,v ,k)
	       (%subtract-with-borrow ,a-digit ,b-digit ,borrow)
	     (setf (%bignum-ref ,res ,i) ,v)
	     (setf ,borrow ,k))))
       (,return-fun ,res ,len-res))))

) ;EVAL-WHEN

(defun subtract-bignum (a b)
  (declare (type bignum-type a b))
  (let* ((len-a (%bignum-length a))
	 (len-b (%bignum-length b))
	 (len-res (1+ (max len-a len-b)))
	 (res (%allocate-bignum len-res)))
    (declare (type bignum-index len-a len-b len-res)) ;Test len-res for bounds?
    (subtract-bignum-loop a len-a b len-b res len-res %normalize-bignum)))

;;; SUBTRACT-BIGNUM-BUFFERS -- Internal.
;;;
;;; Operations requiring a subtraction without the overhead of intermediate
;;; results, such as GCD, use this.  It assumes Result is big enough for the
;;; result.
;;;
(defun subtract-bignum-buffers-with-len (a len-a b len-b result len-res)
  (declare (type bignum-type a b)
	   (type bignum-index len-a len-b))
  (subtract-bignum-loop a len-a b len-b result len-res
			%normalize-bignum-buffer))

(defun subtract-bignum-buffers (a len-a b len-b result)
  (declare (type bignum-type a b)
	   (type bignum-index len-a len-b))  
  (subtract-bignum-loop a len-a b len-b result (max len-a len-b)
			%normalize-bignum-buffer))



;;;; Multiplication.

;;; **********************************************************************
;;;
;;; This Karatsuba implementation was written by Raymond Toy and
;;; Douglas T. Crosher and has been placed in the Public domain, and
;;; is provided 'as is'.
;;;
;;; **********************************************************************
;;;
;;; Karatsuba multiplication.
;;; References:  Knuth, Seminumerical Algorithms.
;;;

;;; Based on an implementation by Raymond Toy, who's explanation follows:
;;;
;;; Let U = (b^n)*U1 + U0 and V = (b^n)*V1 + V0 be two positive
;;; integers consisting of b^(2n) base-b digits.  Typically, we use
;;; either base 2 digits or base 2^32 digits.
;;;
;;; The product U*V can be written
;;;
;;;    U*V = (b^(2n))*U1*V1 + (b^n)(U0*V1 + U1*V0) + U0*V0
;;;
;;; However, the middle term can be written as
;;;
;;;    U0*V1 + U1*V0 = U0*V0 + U1*V1 - (U0 - U1)*(V0 - V1) 
;;;
;;; Thus,
;;;
;;;    U*V = (b^(2n))*U1+V1 + (b^n)*[U1*V1 + U0*V0 - (U0 - U1)*(V0 - V1)]
;;;           U0*V0
;;;
;;; Note that now we require only three multiplies: U1*V1, U0*V0, and
;;; (U0 - U1)*(V0 - V1).  This should speed up multiplication
;;; considerably.
;;;
;;; For implemenation, we only want to work with positive numbers.
;;; Since U0-U1 or V0-V1 may be negative, we need to account for this.
;;; To do so, we compute
;;;
;;;    U1*V1 + U0*V0 - Su*Sv*|U0 - U1|*|V0 - V1|
;;;
;;; where Su = sign (U0 - U1) and Sv = sign (V0 - V1).
;;;
;;; Note that some authors use the expression
;;;
;;;    U0*V1 + U1*V0 = (U0 + U1)*(V0 + V1) - U0*V0 - U1*V1
;;;
;;; We don't because if U0 and U1 each contain b^n digits, U0 + U1 can
;;; overflow to b^n + 1 digits.  This complicates the multiplication quite a
;;; bit, so we use |U0 - U1|.  This is guaranteed not to overflow since U0 and
;;; U1 are both positive with b^n digits.
;;;

;;; karatsuba-internal  --  Internal.
;;;
;;; Main routine for Karatsuba multiplication.
;;; By Douglas Crosher.
;;;
;;; The result is placed in the result bignum starting at position RET, and is
;;; of size 2xD words. An extra D words are used during the calculations.
;;;
;;; The calculations are packed into this working space as follows:
;;;
;;; ------------------------------------------------------------------
;;; |    |   D/2   |   D/2   |  D/2    |   D/2   |   D/2   |  D/2    |
;;; |----+---------+---------+---------+---------+---------+---------|
;;; | A. | |u1-u0| | |v1-v0| |    x    |       |u1-u0|*|v1-v0|       | 
;;; | B. |           u0 * v0           |       |u1-u0|*|v1-v0|       |
;;; | C. | u0 * v0 - S|u1-u0|*|v1-v0|  |             x               |
;;; | D. | u0 * v0 - S|u1-u0|*|v1-v0|  |          v1 * v0            |
;;; | E. | u0 * v0 - S|u1-u0|*|v1-v0| + v1 * v0  |    x    |    x    |
;;; ------------------------------------------------------------------
;;;
;;; A. Calculate |u1-u0| place the result in the first D/2 words, and
;;;    calculate |v1-v0| placing the result the second D/2 words. Then
;;;    calculate |u1-u0|*|v1-v0| using the last 3 D/2 words for the result and
;;;    subcalculate scratch area.
;;;
;;; B. Calculate the product u0*v0, using the first 3 D/2 words for the result
;;;    and subcalculate scratch area.
;;;
;;; C. Sum the results of first two stages into the first 3 D/2 words.
;;;    The calculation is (u0*v0) + ((u0*v0) - S|u1-u0|*|v1-v0|) *2^(d/2).
;;;
;;; D. Calculate the product u1*v1, using the last 3 D/2 words for the result
;;;    and subcalculate scratch area.
;;;
;;; E. Finally sum in u1*v1 to give the result in the first 4 D/2 words.
;;;


;; This might need some tuning
(declaim (fixnum *karatsuba-classical-cutoff*))
(defparameter *karatsuba-classical-cutoff* 10
  "When the bignum pieces are smaller than this many words, we use the
classical multiplication algorithm instead of recursing all the way
down to individual words.")

(defun karatsuba-internal (u v ret n d result)
  (declare (type bignum-index u v ret)
	   (type bignum-index d n)
	   (type bignum-type result)
	   (optimize (speed 3) (safety 0) (debug 0)))

  (let* ((odd (logand d 1))
	 (origd d)
	 (d/2- (ash d -1))
	 (d/2 (+ d/2- odd))
	 (d (* d/2 2))
	 (n/2 (ash n -1)))
    (labels ((bignum-multiply-in-place (u v ret d result cleard)
	       (declare (type bignum-index u v ret)
			(type bignum-index d)
			(type bignum-type result)
			(optimize (speed 3) (safety 0) (debug 0)))
	       ;; Clear out the result area, which might contain garbage for
	       ;; other recursions!
	       (do ((i ret (1+ i))
		    (end (+ ret (* 2 cleard))))
		   ((>= i end))
		 (setf (%bignum-ref result i) 0))
	       ;; Stolen from bignum.lisp multiply-bignum: a straight forward
	       ;; multiplication via the classical schoolbook algorithm.
	       (dotimes (i d)
		 (declare (type bignum-index i))
		 (let ((carry-digit 0)
		       (x (%bignum-ref result (+ u i)))
		       (k (+ ret i)))
		   (declare (type bignum-index k)
			    (type bignum-element-type carry-digit x))
		   (do ((j d (1- j))
			(v+j v (1+ v+j)))
		       ((zerop j))
		     (declare (type bignum-index j v+j))
		     (multiple-value-bind (big-carry res-digit)
			 (%multiply-and-add x
					    (%bignum-ref result v+j)
					    (%bignum-ref result k)
					    carry-digit)
		       (declare (type bignum-element-type big-carry res-digit))
		       (setf (%bignum-ref result k) res-digit)
		       (setf carry-digit big-carry)
		       (incf k)))
		   (setf (%bignum-ref result k) carry-digit))))
	     (abs-diff (n1 x n2 y res result)
	       (declare (type bignum-index n1 n2)
			(type bignum-index x y res))
	       (flet ((bigger-p ()
			;; We guarantee in the caller that n1 is either
			;; n2 or (1+ n2)
			(when (> n1 n2)
			  ;;(assert (= n1 (1+ n2)))
			  (if (zerop (%bignum-ref result (+ x n1 -1)))
			      (progn
				(setf (%bignum-ref result (+ res n1 -1)) 0)
				(decf n1))				
			      (return-from bigger-p t)))
			;; Return T if X >= Y.		      
			(do ((i (1- (+ x n1)) (1- i))
			     (j (1- (+ y n2)) (1- j)))
			    (())
			  (declare (type bignum-index i j))
			  (let ((x-digit (%bignum-ref result i))
				(y-digit (%bignum-ref result j)))
			    (when (/= x-digit y-digit)
			      (return-from bigger-p (>= x-digit y-digit))))
			  ;; Need to test for the exit condition here
			  ;; instead of in the DO headers because when
			  ;; X or Y is 0 and the numbers are equal I
			  ;; or J will be decremented to -1, which
			  ;; isn't of type bignum-index.
			  (when (= i x)
			    (return-from bigger-p t)))))
		 (declare (inline bigger-p))
		 (let ((sign 1))
		   (when (not (bigger-p))		     
		     (rotatef x y)
		     (rotatef n1 n2)
		     (setf sign -1))
		   (let ((borrow 1))
		     (do ((i x (1+ i))
			  (j y (1+ j))
			  (k res (1+ k))
			  (end (+ x n1))
			  (end2 (+ y n2)))
			 ((>= i end))
		       (declare (type bignum-index i j k end))
		       (multiple-value-bind (diff new-borrow)
			   (%subtract-with-borrow (%bignum-ref result i)
						  (if (>= j end2)
						      0
						      (%bignum-ref result j))
						  borrow)
			 (setf (%bignum-ref result k) diff)
			 (setf borrow new-borrow)))
		     sign))))
	     (propagate-carry (start end carry)
	       (declare (type bignum-type result)
			(type bignum-index start end)
			(type (integer -4 4) carry))
	       (cond ((minusp carry)
		      (multiple-value-bind (sum borrow)
			  (%subtract-with-borrow (%bignum-ref result start)
						 (- carry) 1)
			(setf (%bignum-ref result start) sum)
			(do ((i (1+ start) (1+ i)))
			    ((or (>= i end) (= borrow 1)) (- borrow 1))
			  (declare (type bignum-index i))
			  (multiple-value-bind (sum next-borrow)
			      (%subtract-with-borrow (%bignum-ref result i)
						     0 borrow)
			    (setf borrow next-borrow)
			    (setf (%bignum-ref result i) sum)))))
		     (t
		      (multiple-value-bind (sum carry)
			  (%add-with-carry (%bignum-ref result start) carry 0)
			(setf (%bignum-ref result start) sum)
			(do ((i (1+ start) (1+ i)))
			    ((or (>= i end) (zerop carry)) carry)
			  (declare (type bignum-index i))
			  (multiple-value-bind (sum next-carry)
			      (%add-with-carry (%bignum-ref result i) 0 carry)
			    (setf carry next-carry)
			    (setf (%bignum-ref result i) sum)))))))
	     (stageC-add ()
	       (let ((carry11 0)
		     (carry12 0)
		     (carry2 0))
		 (do ((i0 ret (1+ i0))
		      (i1 (+ ret d/2) (1+ i1))
		      (i2 (+ ret d) (1+ i2))
		      (i3 (+ ret n/2) (1+ i3))
		      (i4 (+ ret n/2 d/2) (1+ i4))
		      (end (+ ret d/2)))
		     ((>= i0 end))
		   (declare (type bignum-index i0 i1 i2 i3 i4))
		   (let ((b (%bignum-ref result i1)))
		     (multiple-value-bind (sum c1)
			 (%add-with-carry b (%bignum-ref result i0) carry11)
		       (multiple-value-bind (sum c2)
			   (%add-with-carry sum (%bignum-ref result i3) carry12)
			 (setf carry11 c1)
			 (setf carry12 c2)
			 (setf (%bignum-ref result i1) sum)))
		     (multiple-value-bind (sum carry)
			 (%add-with-carry b (%bignum-ref result i4) carry2)
		       (setf (%bignum-ref result i2) sum)
		       (setf carry2 carry))))
		 (+ (propagate-carry (+ ret d) (+ ret n/2) (+ carry11 carry12))
		    carry2)))
	     (stageC-subtract ()
	       (let ((carry11 0)
		     (borrow12 1)
		     (borrow2 1))
		 (do ((i0 ret (1+ i0))
		      (i1 (+ ret d/2) (1+ i1))
		      (i2 (+ ret d) (1+ i2))
		      (i3 (+ ret n/2) (1+ i3))
		      (i4 (+ ret n/2 d/2) (1+ i4))
		      (end (+ ret d/2)))
		     ((>= i0 end))
		   (declare (type bignum-index i0 i1 i2 i3 i4))
		   (let ((b (%bignum-ref result i1)))
		     (multiple-value-bind (sum c1)
			 (%add-with-carry b (%bignum-ref result i0) carry11)
		       (multiple-value-bind (sum b2)
			   (%subtract-with-borrow sum (%bignum-ref result i3)
						  borrow12)
			 (setf carry11 c1)
			 (setf borrow12 b2)
			 (setf (%bignum-ref result i1) sum)))
		     (multiple-value-bind (sum borrow)
			 (%subtract-with-borrow b (%bignum-ref result i4)
						borrow2)
		       (setf (%bignum-ref result i2) sum)
		       (setf borrow2 borrow))))
		 (+ (propagate-carry (+ ret d) (+ ret n/2)
				     (+ carry11 borrow12 -1))
		    (- borrow2 1))))
	     (stageE-add (stageC-carry)
	       ;; Sum the above pieces, result to R0124.
	       (let ((carry1 0)
		     (carry21 0)
		     (carry22 0))
		 (declare (type (mod 2) carry1 carry21 carry22))
		 (do ((i0 ret (1+ i0))
		      (i1 (+ ret d/2) (1+ i1))
		      (i2 (+ ret d) (1+ i2))
		      (i3 (+ ret d d/2) (1+ i3))
		      (i4 (+ ret d d) (1+ i4))
		      (end (+ ret d/2)))
		     ((>= i0 end))
		   (declare (type bignum-index i0 i1 i2 i3 i4))
		   (multiple-value-bind (sum c1)
		       (%add-with-carry (%bignum-ref result i1)
					(%bignum-ref result i3)
					carry1)
		     (setf carry1 c1)
		     (setf (%bignum-ref result i1) sum))
		   (let ((e (%bignum-ref result i4)))
		     (multiple-value-bind (sum c1)
			 (%add-with-carry e (%bignum-ref result i2) carry21)
		       (multiple-value-bind (sum c2)
			   (%add-with-carry sum (%bignum-ref result i3) carry22)
			 (setf carry21 c1)
			 (setf carry22 c2)
			 (setf (%bignum-ref result i2) sum)))
		     (setf (%bignum-ref result i3) e)))
		 (propagate-carry (+ ret d) (+ ret d d) carry1)
		 (propagate-carry (+ ret d d/2)
						 (+ ret d d)
						 (+ carry21 carry22 stageC-carry)))))
      (cond ((<= d (ext:truly-the fixnum *karatsuba-classical-cutoff*))
	     (bignum-multiply-in-place u v ret origd result d))
	    (t
	     (let* ((ret1 (+ ret d/2))
		    (ret3 (+ ret n/2))
		    (u-hi (+ u d/2))
		    (v-hi (+ v d/2))
		    (diff-sign (* (abs-diff d/2 u d/2- u-hi ret result)
				  (abs-diff d/2 v d/2- v-hi ret1 result))))
	       (declare (type bignum-index d/2 ret1 ret3 u-hi v-hi)
			(type (member -1 1) diff-sign))
	       (do ((i ret3 (1+ i)))
		   ((>= i (+ ret3 d)))
		 (setf (%bignum-ref result i) 0))
	       (karatsuba-internal ret ret1 ret3 n/2 d/2 result)
	       (do ((i ret (1+ i)))
		   ((>= i ret3))
		 (setf (%bignum-ref result i) 0))	       
	       (karatsuba-internal u v ret n/2 d/2 result)
	       (let ((stagec-carry (if (minusp diff-sign)
				       (stagec-add)
				       (stagec-subtract))))
		 (setf ret3 (+ ret d d/2))
		 (karatsuba-internal u-hi v-hi ret3 n/2 d/2- result)
		 (when (/= d/2 d/2-)
		   (setf (%bignum-ref result (+ ret3 (* d/2- 2))) 0)
		   (setf (%bignum-ref result (+ ret3 (* d/2- 2) 1)) 0))
		 (stageE-add stageC-carry))))))
    result))


;;; karatsuba  --  Interface.
;;;
;;; Multiply two bignums using the Karatsuba multiplication technique.
;;;
;;; The arguments are currently copied to the end of the working
;;; result causing some extra consing, and the arguments are both
;;; extended to have the same width implementation rather than
;;; exploiting a small width.
;;;
(defun karatsuba (x y)
  (declare (type bignum-type x y)
	   (optimize (speed 3) (safety 0) (debug 3)))
  (flet ((power-of-two (n)
	   ;; Compute the smallest power of two greater than or equal
	   ;; to the given number.
	   (declare (type bignum-index n))
	   (let ((power 1))
	     (declare (type bignum-index power))
	     (loop while (< power n) do
		   (setf power (ash power 1)))
	     power)))
    (let* ((x-plusp (%bignum-0-or-plusp x (%bignum-length x)))
	   (y-plusp (%bignum-0-or-plusp y (%bignum-length y)))
	   (x (if x-plusp x (negate-bignum x)))
	   (y (if y-plusp y (negate-bignum y)))
	   (negate-res (not (eq x-plusp y-plusp)))
	   (x-words (ceiling (integer-length x) 32))
	   (y-words (ceiling (integer-length y) 32))
	   (d (max x-words y-words))
	   (n (power-of-two d)))
      (declare (type bignum-index n))

      (let ((result (%allocate-bignum (* 5 n))))

      ;; Copy X, Y to the end of the result area, so that we can use
      ;; indices off of the result area for accessing everything.
      (do ((k 0 (1+ k))
	   (x-save (* 3 n) (1+ x-save)))
	  ((>= k x-words))
	(setf (%bignum-ref result x-save)
	      (%bignum-ref x k)))
      
      (do ((k 0 (1+ k))
	   (save (* 4 n) (1+ save)))
	  ((>= k y-words))
	(setf (%bignum-ref result save)
	      (%bignum-ref y k)))
      ;; Do it.
      (karatsuba-internal (* 3 n) (* 4 n) 0 (* n 3)
			  (max x-words y-words)
			  result)
      ;; Convert the result into a bignum.
      (let ((new-len (1+ (* 2 n)))
	    (n5 (* n 5)))
	(do ((k (* 2 d) (1+ k)))
	    ((>= k n5))
	  ;;(assert (< k (%bignum-length result)))
	  (setf (%bignum-ref result k) 0))
	(%bignum-set-length result new-len)
	(when negate-res
	  (negate-bignum-in-place result))
	(%normalize-bignum result (1+ (* 2 n))))))))

(defun classical-multiply-bignums (a b)
  (declare (type bignum-type a b))
  (let* ((a-plusp (%bignum-0-or-plusp a (%bignum-length a)))
	 (b-plusp (%bignum-0-or-plusp b (%bignum-length b)))
	 (a (if a-plusp a (negate-bignum a)))
	 (b (if b-plusp b (negate-bignum b)))
	 (len-a (%bignum-length a))
	 (len-b (%bignum-length b))
	 (len-res (+ len-a len-b))
	 (res (%allocate-bignum len-res))
	 (negate-res (not (eq a-plusp b-plusp))))
    (declare (type bignum-index len-a len-b len-res))
    (dotimes (i len-a)
      (declare (type bignum-index i))
      (let ((carry-digit 0)
	    (x (%bignum-ref a i))
	    (k i))
	(declare (type bignum-index k)
		 (type bignum-element-type carry-digit x))
	(dotimes (j len-b)
	  (multiple-value-bind (big-carry res-digit)
			       (%multiply-and-add x (%bignum-ref b j)
						  (%bignum-ref res k)
						  carry-digit)
	    (declare (type bignum-element-type big-carry res-digit))
	    (setf (%bignum-ref res k) res-digit)
	    (setf carry-digit big-carry)
	    (incf k)))
	(setf (%bignum-ref res k) carry-digit)))
    (when negate-res (negate-bignum-in-place res))
    (%normalize-bignum res len-res)))

(defparameter *min-karatsuba-bits* 512
  "Use Karatsuba if the bignums have at least this many bits")

(defun multiply-bignums (a b)
  (declare (type bignum-type a b))
  ;; Use either the classical algorithm or the Karatsuba algorithm
  ;; depending on the size of the numbers.
  (let* ((len-a (integer-length a))
	 (len-b (integer-length b))
	 (min-len (min len-a len-b))
	 (max-len (max len-a len-b)))
    ;; If both numbers are short, use the classical algorithm.  If the
    ;; numbers vary greatly in length, use the classical algorithm.
    ;; Otherwise use the Karatsuba algorithm.
    (if (or (<= min-len *min-karatsuba-bits*)
	    (>= max-len (* 4 min-len)))
	(classical-multiply-bignums a b)
	(karatsuba a b))))

#|
;;;; Test code.

(defun karat-time (n size)
  (declare (fixnum n))
  (let ((max-num (ash 1 size))
	(true 0)
	(kar 0))
    (time
     (dotimes (i n)
       (declare (fixnum i))
       (let ((x (random max-num))
	     (y (random max-num)))
	 (dotimes (j 10)
	   (declare (fixnum j))
	   (setf true (classical-multiply-bignums x y))))))
    (time
     (dotimes (i n)
       (declare (fixnum i))
       (let ((x (random max-num))
	     (y (random max-num)))
	 (dotimes (j 10)
	   (declare (fixnum j))
	   (setf kar (multiply-bignums x y))))))
    (let ((bad (/= kar true)))
      (format t "DIFF~%")
      #+nil
      (when bad
	(format t "(- (* ~X ~X) ~X)~%" x y kar)
	(format t "~X~%~X~%" (* x y) kar)))
    (values)))

(defun karat-time (n size)
  (declare (fixnum n))
  (let* ((max-num (ash 1 size))
	 (true 0)
	 (kar 0)
	 (x (random max-num))
	 (y (random max-num)))
    (ext:gc)
    (format t "~D bits x ~D bits~%" (integer-length x) (integer-length y))
    (time
     (dotimes (i n)
       (declare (fixnum i))
       (dotimes (j 10)
	 (declare (fixnum j))
	 (setf true (classical-multiply-bignums x y)))))
    (ext:gc)
    (time
     (dotimes (i n)
       (declare (fixnum i))
       (dotimes (j 10)
	 (declare (fixnum j))
	 (setf kar (multiply-bignums x y)))))
    (format t "~X~%~X" x y)
    
    (let ((bad (/= kar true)))
      (when bad
	(format t "DIFF~%")
	(format t "(- (* ~X ~X) ~X)~%" x y kar)
	(format t "~X~%~X~%" (* x y) kar)))
    (values)))

(defun karat-time-2 (n size)
  (declare (fixnum n))
  (let* ((max-num (ash 1 size))
	 (max-half (ash 1 (floor size 2)))
	 (true 0)
	 (kar 0)
	 (x (random max-num))
	 (y (random max-half)))
    (ext:gc)
    (time
     (dotimes (i n)
       (declare (fixnum i))
       (dotimes (j 10)
	 (declare (fixnum j))
	 (setf true (classical-multiply-bignums x y)))))
    (ext:gc)
    (time
     (dotimes (i n)
       (declare (fixnum i))
       (dotimes (j 10)
	 (declare (fixnum j))
	 (setf kar (multiply-bignums x y)))))
    (format t "~X~%~X" x y)
    
    (let ((bad (/= kar true)))
      (when bad
	(format t "DIFF~%")
	(format t "(- (* ~X ~X) ~X)~%" x y kar)
	(format t "~X~%~X~%" (* x y) kar)))
    (values)))

(defun karat-test (n size)
  (declare (fixnum n))
  (dotimes (k n)
    (let* ((max-num (ash 1 size))
	   (x (random max-num))
	   (y (random max-num))
	   (true 0)
	   (kar 0))
      (declare (fixnum k))
      (setf true (classical-multiply-bignums x y))
      (setf kar (multiply-bignums x y))
      (let ((bad (/= kar true)))
	(when bad
	  (format t "(- (* ~X ~X) ~X)~%" x y kar)
	  (format t "~X~%~X~%" (* x y) kar)))))
  (values))
|#

(defun multiply-bignum-and-fixnum (bignum fixnum)
  (declare (type bignum-type bignum) (type fixnum fixnum))
  (let* ((bignum-plus-p (%bignum-0-or-plusp bignum (%bignum-length bignum)))
	 (fixnum-plus-p (not (minusp fixnum)))
	 (bignum (if bignum-plus-p bignum (negate-bignum bignum)))
	 (bignum-len (%bignum-length bignum))
	 (fixnum (if fixnum-plus-p fixnum (- fixnum)))
	 (result (%allocate-bignum (1+ bignum-len)))
	 (carry-digit 0))
    (declare (type bignum-type bignum result)
	     (type bignum-index bignum-len)
	     (type bignum-element-type fixnum carry-digit))
    (dotimes (index bignum-len)
      (declare (type bignum-index index))
      (multiple-value-bind
	  (next-digit low)
	  (%multiply-and-add (%bignum-ref bignum index) fixnum carry-digit)
	(declare (type bignum-element-type next-digit low))
	(setf carry-digit next-digit)
	(setf (%bignum-ref result index) low)))
    (setf (%bignum-ref result bignum-len) carry-digit)
    (unless (eq bignum-plus-p fixnum-plus-p)
      (negate-bignum-in-place result))
    (%normalize-bignum result (1+ bignum-len))))

(defun multiply-fixnums (a b)
  (declare (fixnum a b))
  (let* ((a-minusp (minusp a))
	 (b-minusp (minusp b)))
    (multiple-value-bind (high low)
			 (%multiply (if a-minusp (- a) a)
				    (if b-minusp (- b) b))
      (declare (type bignum-element-type high low))
      (if (and (zerop high)
	       (%digit-0-or-plusp low))
	  (let ((low (ext:truly-the (unsigned-byte 31)
				    (%fixnum-digit-with-correct-sign low))))
	    (if (eq a-minusp b-minusp)
		low
		(- low)))
	  (let ((res (%allocate-bignum 2)))
	    (%bignum-set res 0 low)
	    (%bignum-set res 1 high)
	    (unless (eq a-minusp b-minusp) (negate-bignum-in-place res))
	    (%normalize-bignum res 2))))))



;;;; BIGNUM-REPLACE and WITH-BIGNUM-BUFFERS.

(eval-when (compile eval)

;;; BIGNUM-REPLACE -- Internal.
;;;
(defmacro bignum-replace (dest src &key (start1 '0) end1 (start2 '0) end2
			       from-end)
  (ext:once-only ((n-dest dest)
		  (n-src src))
    (let ((n-start1 (gensym))
	  (n-end1 (gensym))
	  (n-start2 (gensym))
	  (n-end2 (gensym))
	  (i1 (gensym))
	  (i2 (gensym))
	  (end1 (or end1 `(%bignum-length ,n-dest)))
	  (end2 (or end2 `(%bignum-length ,n-src))))
      (if from-end
	  `(let ((,n-start1 ,start1)
		 (,n-start2 ,start2))
	     (do ((,i1 (1- ,end1) (1- ,i1))
		  (,i2 (1- ,end2) (1- ,i2)))
		 ((or (< ,i1 ,n-start1) (< ,i2 ,n-start2)))
	       (declare (fixnum ,i1 ,i2))
	       (%bignum-set ,n-dest ,i1
			    (%bignum-ref ,n-src ,i2))))
	  `(let ((,n-end1 ,end1)
		 (,n-end2 ,end2))
	     (do ((,i1 ,start1 (1+ ,i1))
		  (,i2 ,start2 (1+ ,i2)))
		 ((or (>= ,i1 ,n-end1) (>= ,i2 ,n-end2)))
	       (declare (type bignum-index ,i1 ,i2))
	       (%bignum-set ,n-dest ,i1
			    (%bignum-ref ,n-src ,i2))))))))


;;; WITH-BIGNUM-BUFFERS  --  Internal.
;;;
;;; Could do freelisting someday.
;;;
(defmacro with-bignum-buffers (specs &body body)
  "WITH-BIGNUM-BUFFERS ({(var size [init])}*) Form*"
  (ext:collect ((binds)
		(inits))
    (dolist (spec specs)
      (let ((name (first spec))
	    (size (second spec)))
	(binds `(,name (%allocate-bignum ,size)))
	(let ((init (third spec)))
	  (when init
	    (inits `(bignum-replace ,name ,init))))))
    `(let* ,(binds)
       ,@(inits)
       ,@body)))

) ;EVAL-WHEN



;;;; GCD.
;;; MAKE-SMALL-BIGNUM -- Public.
;;;
;;; Allocate a single word bignum that holds fixnum.  This is useful when
;;; we are trying to mix fixnum and bignum operands.
;;; 
(declaim (inline make-small-bignum))
(defun make-small-bignum (fixnum)
  (let ((res (%allocate-bignum 1)))
    (setf (%bignum-ref res 0) (%fixnum-to-digit fixnum))
    res))

(eval-when (:compile-toplevel :load-toplevel :execute)
  ;; The asserts in the GCD implementation are way too expensive to
  ;; check in normal use, and are disabled here.
  (defmacro gcd-assert (&rest args)
    (if nil
	`(assert ,@args)))
  ;; We'll be doing a lot of modular arithmetic.
  (defmacro M (form)
    `(logand all-ones-digit ,form))
  )

;; When the larger number is less than this many bignum digits long, revert
;; to old algorithm. 
(defparameter *accelerated-gcd-cutoff* 3)

;;; Alternate between k-ary reduction with the help of
;;; REDUCED-RATIO-MOD and digit modulus reduction via DMOD. Once the
;;; arguments get small enough, drop through to BIGNUM-MOD-GCD (since
;;; k-ary reduction can introduce spurious factors, which need to be
;;; filtered out). Reference: Kenneth Weber, "The accelerated integer
;;; GCD algorithm", ACM Transactions on Mathematical Software, volume
;;; 21, number 1, March 1995, epp. 111-122.
(defun bignum-gcd (u0 v0)
  (declare (type bignum-type u0 v0))
  (let* ((u1 (if (%bignum-0-or-plusp u0 (%bignum-length u0))
		 u0
		 (negate-bignum u0 nil)))
	 (v1 (if (%bignum-0-or-plusp v0 (%bignum-length v0))
		 v0
		 (negate-bignum v0 nil))))
    (if (zerop v1)
	(return-from bignum-gcd u1))	
    (when (> u1 v1)
      (rotatef u1 v1))
    (let ((n (mod v1 u1)))
      (setf v1 (if (fixnump n)
		   (make-small-bignum n)
		   n)))
    (if (and (= 1 (%bignum-length v1))
	     (zerop (%bignum-ref v1 0)))
	(return-from bignum-gcd (%normalize-bignum u1
						   (%bignum-length u1))))
    (let* ((buffer-len (+ 2 (%bignum-length u1)))
	   (u (%allocate-bignum buffer-len))
	   (u-len (%bignum-length u1))
	   (v (%allocate-bignum buffer-len))
	   (v-len (%bignum-length v1))
	   (tmp1 (%allocate-bignum buffer-len))
	   (tmp1-len 0)
	   (tmp2 (%allocate-bignum buffer-len))
	   (tmp2-len 0)
	   (factors-of-two
	    (bignum-factors-of-two u1 (%bignum-length u1)
				   v1 (%bignum-length v1))))
      (declare (type (or null bignum-index)
		     buffer-len u-len v-len tmp1-len tmp2-len))
      (bignum-replace u u1)
      (bignum-replace v v1)
      (setf u-len
	    (make-gcd-bignum-odd u
				 (bignum-buffer-ashift-right u u-len
							     factors-of-two)))
      (setf v-len
	    (make-gcd-bignum-odd v
				 (bignum-buffer-ashift-right v v-len
							     factors-of-two)))
      (loop until (or (< u-len *accelerated-gcd-cutoff*)
		      (not v-len)
		      (zerop v-len)
		      (and (= 1 v-len)
			   (zerop (%bignum-ref v 0))))	
	do
	(gcd-assert (= buffer-len (%bignum-length u)
		       (%bignum-length v)
		       (%bignum-length tmp1)
		       (%bignum-length tmp2)))
	(if (> (bignum-buffer-integer-length u u-len)
	       (+ #.(truncate vm:word-bits 4)
		  (bignum-buffer-integer-length v v-len)))
	    (setf u-len (dmod u u-len
			      v v-len
			      tmp1))
	    (multiple-value-bind (n d) (reduced-ratio-mod u v)
	      (setf tmp1-len
		    (multiply-bignum-buffer-and-smallnum-to-buffer v v-len
								   n tmp1))
	      (setf tmp2-len
		    (multiply-bignum-buffer-and-smallnum-to-buffer u u-len
								   d tmp2))
	      (gcd-assert (= (copy-bignum tmp2 tmp2-len)
			     (* (copy-bignum u u-len) d)))
	      (gcd-assert (= (copy-bignum tmp1 tmp1-len)
			     (* (copy-bignum v v-len) n)))
	      (setf u-len
		    (subtract-bignum-buffers-with-len tmp1 tmp1-len
						      tmp2 tmp2-len
						      u
						      (1+ (max tmp1-len
							       tmp2-len))))
	      (gcd-assert (or (zerop (- (copy-bignum tmp1 tmp1-len)
					(copy-bignum tmp2 tmp2-len)))
			      (= (copy-bignum u u-len)
				 (- (copy-bignum tmp1 tmp1-len)
				    (copy-bignum tmp2 tmp2-len)))))
	      (bignum-abs-buffer u u-len)
	      (gcd-assert (zerop (M u)))))
	(setf u-len (make-gcd-bignum-odd u u-len))
	(rotatef u v)	
	(rotatef u-len v-len))
      (setf u (copy-bignum u u-len))
      (let ((n (bignum-mod-gcd v1 u)))	
	(ash (bignum-mod-gcd u1 (if (fixnump n)
				    (make-small-bignum n)
				    n))
	     factors-of-two)))))

(defun bignum-mod-gcd (a b)
  (declare (type bignum-type a b))
  (when (< a b)
    (rotatef a b))
  ;; While the length difference of A and B is sufficiently large,
  ;; reduce using MOD (slowish, but it should equalize the sizes of
  ;; A and B pretty quickly). After that, use the binary GCD
  ;; algorithm to handle the rest.
  (loop until (and (= (%bignum-length b) 1) (zerop (%bignum-ref b 0))) do
	(when (<= (%bignum-length a) (1+ (%bignum-length b)))
	  (return-from bignum-mod-gcd (bignum-binary-gcd a b)))
	(let ((rem (mod a b)))
	  (if (fixnump rem)
	      (setf a (make-small-bignum rem))
	      (setf a rem))
	  (rotatef a b)))
  (if (= (%bignum-length a) 1)
      (%normalize-bignum a 1)
      a))

(defun bignum-binary-gcd (a b)
  (declare (type bignum-type a b))
  (let* ((len-a (%bignum-length a))
	 (len-b (%bignum-length b)))
    (declare (type bignum-index len-a len-b))
    (with-bignum-buffers ((a-buffer len-a a)
			  (b-buffer len-b b)
			  (res-buffer (max len-a len-b)))
      (let* ((factors-of-two
	      (bignum-factors-of-two a-buffer len-a
				     b-buffer len-b))
	     (len-a (make-gcd-bignum-odd
		     a-buffer
		     (bignum-buffer-ashift-right a-buffer len-a
						 factors-of-two)))
	     (len-b (make-gcd-bignum-odd
		     b-buffer
		     (bignum-buffer-ashift-right b-buffer len-b
						 factors-of-two))))
	(declare (type bignum-index len-a len-b))
	(let ((x a-buffer)
	      (len-x len-a)
	      (y b-buffer)
	      (len-y len-b)
	      (z res-buffer))
	  (loop
	    (multiple-value-bind (u v len-v r len-r)
		(bignum-gcd-order-and-subtract x len-x y len-y z)
	      (declare (type bignum-index len-v len-r))
	      (when (and (= len-r 1) (zerop (%bignum-ref r 0)))
		(if (zerop factors-of-two)
		    (let ((ret (%allocate-bignum len-v)))
		      (dotimes (i len-v)
			(setf (%bignum-ref ret i) (%bignum-ref v i)))
		      (return (%normalize-bignum ret len-v)))
		    (return (bignum-ashift-left v factors-of-two len-v))))
	      (setf x v  len-x len-v)
	      (setf y r  len-y (make-gcd-bignum-odd r len-r))
	      (setf z u))))))))


(defun bignum-gcd-order-and-subtract (a len-a b len-b res)
  (declare (type bignum-index len-a len-b) (type bignum-type a b))
  (cond ((= len-a len-b)
	 (do ((i (1- len-a) (1- i)))
	     ((= i -1)
	      (setf (%bignum-ref res 0) 0)
	      (values a b len-b res 1))
	   (let ((a-digit (%bignum-ref a i))
		 (b-digit (%bignum-ref b i)))
	     (cond ((%digit-compare a-digit b-digit))
		   ((%digit-greater a-digit b-digit)
		    (return
		     (values a b len-b res
			     (subtract-bignum-buffers a len-a b len-b res))))
		   (t
		    (return
		     (values b a len-a res
			     (subtract-bignum-buffers b len-b a len-a res))))))))
	((> len-a len-b)
	 (values a b len-b res
		 (subtract-bignum-buffers a len-a b len-b res)))
	(t
	 (values b a len-a res
		 (subtract-bignum-buffers b len-b a len-a res)))))

(defun make-gcd-bignum-odd (a len-a)
  (declare (type bignum-type a) (type bignum-index len-a))
  (dotimes (index len-a)
    (declare (type bignum-index index))
    (do ((digit (%bignum-ref a index) (%ashr digit 1))
	 (increment 0 (1+ increment)))
	((zerop digit))
      (declare (type (mod 32) increment))
      (when (oddp digit)
	(return-from make-gcd-bignum-odd
		     (bignum-buffer-ashift-right a len-a
						 (+ (* index digit-size)
						    increment)))))))

(defun bignum-factors-of-two (a len-a b len-b)
  (declare (type bignum-index len-a len-b) (type bignum-type a))
  (do ((i 0 (1+ i))
       (end (min len-a len-b)))
      ((= i end) (error "Unexpected zero bignums?"))
    (declare (type bignum-index i end))
    (let ((or-digits (%logior (%bignum-ref a i) (%bignum-ref b i))))
      (unless (zerop or-digits)
	(return (do ((j 0 (1+ j))
		     (or-digits or-digits (%ashr or-digits 1)))
		    ((oddp or-digits) (+ (* i digit-size) j))
		  (declare (type (mod 32) j))))))))

;;; Multiply a bignum buffer with a fixnum or a digit, storing the
;;; result in another bignum buffer, and without using any
;;; temporaries. Inlined to avoid boxing smallnum if it's actually a
;;; digit. Needed by GCD, should possibly OAOO with
;;; MULTIPLY-BIGNUM-AND-FIXNUM.
(declaim (inline multiply-bignum-buffer-and-smallnum-to-buffer))
(defun multiply-bignum-buffer-and-smallnum-to-buffer (bignum bignum-len
							     smallnum res)
  (declare (type bignum-type bignum))
  (let* ((bignum-plus-p (%bignum-0-or-plusp bignum bignum-len))
	 (smallnum-plus-p (not (minusp smallnum)))
	 (smallnum (if smallnum-plus-p smallnum (- smallnum)))
	 (carry-digit 0)) 
    (declare (type bignum-type bignum res)
	     (type bignum-index bignum-len)
	     (type bignum-element-type smallnum carry-digit))
    (unless bignum-plus-p
      (negate-bignum-buffer-in-place bignum bignum-len))
    (dotimes (index bignum-len)
      (declare (type bignum-index index))
      (multiple-value-bind (next-digit low)
	  (%multiply-and-add (%bignum-ref bignum index)
			     smallnum
			     carry-digit)
	(declare (type bignum-element-type next-digit low))
	(setf carry-digit next-digit)
	(setf (%bignum-ref res index) low)))
    (setf (%bignum-ref res bignum-len) carry-digit)
    (unless bignum-plus-p
      (negate-bignum-buffer-in-place bignum bignum-len))
    (let ((res-len (%normalize-bignum-buffer res (1+ bignum-len))))
      (unless (eq bignum-plus-p smallnum-plus-p)
	(negate-bignum-buffer-in-place res res-len))
      res-len)))

;;; Given U and V, return U / V mod 2^32. Implements the algorithm in the
;;; paper, but uses some clever bit-twiddling nicked from Nickle to do it.
(declaim (inline bmod))
(defun bmod (u v)
  (let ((ud (%bignum-ref u 0))
	(vd (%bignum-ref v 0))
	(umask 0)
	(imask 1)
	(m 0))
    (declare (type (unsigned-byte #.vm:word-bits) ud vd umask imask m))
    (dotimes (i digit-size)
      (setf umask (logior umask imask))
      (unless (zerop (logand ud umask))
	(setf ud (M (- ud vd)))
	(setf m (M (logior m imask))))
      (setf imask (M (%ashl imask 1)))
      (setf vd (M (%ashl vd 1))))
    m))

(defun dmod (u u-len v v-len tmp1)
  (loop while (> (bignum-buffer-integer-length u u-len)
		 (+ (bignum-buffer-integer-length v v-len)
		    digit-size))
    do
    (unless (zerop (%bignum-ref u 0))
      (let* ((bmod (bmod u v))
	     (tmp1-len (multiply-bignum-buffer-and-smallnum-to-buffer v v-len
								      bmod
								      tmp1)))
	(setf u-len (subtract-bignum-buffers u u-len
					     tmp1 tmp1-len
					     u))
	(bignum-abs-buffer u u-len)))
    (gcd-assert (zerop (%bignum-ref u 0)))
    (setf u-len (bignum-buffer-ashift-right u u-len digit-size)))
  (let* ((d (+ 1 (- (bignum-buffer-integer-length u u-len)
		    (bignum-buffer-integer-length v v-len))))
	 (n (1- (ash 1 d))))
    (declare (type (unsigned-byte #.(integer-length #.vm:word-bits)) d)
	     (type (unsigned-byte #.vm:word-bits) n))
    (gcd-assert (>= d 0))
    (unless (zerop (logand (%bignum-ref u 0) n))
      (let ((tmp1-len
	     (multiply-bignum-buffer-and-smallnum-to-buffer v v-len
							    (logand n (bmod u
									    v))
							    tmp1)))
	(setf u-len (subtract-bignum-buffers u u-len
					     tmp1 tmp1-len
					     u))
	(bignum-abs-buffer u u-len)))
    u-len))

(defconstant lower-ones-digit (1- (ash 1 (truncate vm:word-bits 2))))
  
;;; Find D and N such that (LOGAND ALL-ONES-DIGIT (- (* D X) (* N Y))) is 0,
;;; (< 0 N LOWER-ONES-DIGIT) and (< 0 (ABS D) LOWER-ONES-DIGIT).
(defun reduced-ratio-mod (x y)
  (let* ((c (bmod x y))
	 (n1 c)
	 (d1 1)
	 (n2 (M (- n1)) #+nil(M (1+ (M (lognot n1)))))
	 (d2 (M -1)))
    (declare (type (unsigned-byte #.vm:word-bits) n1 d1 n2 d2))
    (loop while (> n2 (expt 2 (truncate digit-size 2))) do
	  (loop for i of-type (signed-byte 5)
	     downfrom (- (integer-length n1) (integer-length n2))
	     while (>= n1 n2)
	     do
	     (let ((i i))
	       (declare (type (mod #.vm:word-bits) i))
	       (when (>= n1 (M (%ashl n2 i)))
		 (psetf n1 (M (- n1 (%ashl n2 i)))
			d1 (M (- d1 (%ashl d2 i)))))))
	  (psetf n1 n2
		 d1 d2
		 n2 n1
		 d2 d1))
    (values n2 (if (>= d2 (expt 2 (1- digit-size)))
		   (lognot (logand most-positive-fixnum (lognot d2)))
		   (logand lower-ones-digit d2)))))


(defun copy-bignum (a &optional (len (%bignum-length a)))
  (let ((b (%allocate-bignum len)))
    (bignum-replace b a)
    (%bignum-set-length b len)
    b))

;;;; Negation

(eval-when (compile eval)

;;; BIGNUM-NEGATE-LOOP -- Internal.
;;;
;;; This negates bignum-len digits of bignum, storing the resulting digits into
;;; result (possibly EQ to bignum) and returning whatever end-carry there is.
;;;
(defmacro bignum-negate-loop (bignum bignum-len &optional (result nil resultp))
  (let ((carry (gensym))
	(end (gensym))
	(value (gensym))
	(last (gensym)))
    `(let* (,@(if (not resultp) `(,last))
	    (,carry 
	     (multiple-value-bind (,value ,carry)
				  (%add-with-carry
				   (%lognot (%bignum-ref ,bignum 0)) 1 0)
	       ,(if resultp
		    `(setf (%bignum-ref ,result 0) ,value)
		    `(setf ,last ,value))
	       ,carry))
	    (i 1)
	    (,end ,bignum-len))
       (declare (type bit ,carry)
		(type bignum-index i ,end))
       (loop
	 (when (= i ,end) (return))
	 (multiple-value-bind (,value temp)
			      (%add-with-carry
			       (%lognot (%bignum-ref ,bignum i)) 0 ,carry)
	   ,(if resultp
		`(setf (%bignum-ref ,result i) ,value)
		`(setf ,last ,value))
	   (setf ,carry temp))
	 (incf i))
       ,(if resultp carry `(values ,carry ,last)))))

) ;EVAL-WHEN

;;; NEGATE-BIGNUM -- Public.
;;;
;;; Fully-normalize is an internal optional.  It cause this to always return
;;; a bignum, without any extraneous digits, and it never returns a fixnum.
;;;
(defun negate-bignum (x &optional (fully-normalize t))
  (declare (type bignum-type x))
  (let* ((len-x (%bignum-length x))
	 (len-res (1+ len-x))
	 (res (%allocate-bignum len-res)))
    (declare (type bignum-index len-x len-res)) ;Test len-res for range?
    (let ((carry (bignum-negate-loop x len-x res)))
      (setf (%bignum-ref res len-x)
	    (%add-with-carry (%lognot (%sign-digit x len-x)) 0 carry)))
    (if fully-normalize
	(%normalize-bignum res len-res)
	(%mostly-normalize-bignum res len-res))))

;;; NEGATE-BIGNUM-IN-PLACE -- Internal.
;;;
;;; This assumes bignum is positive; that is, the result of negating it will
;;; stay in the provided allocated bignum.
;;;
(defun negate-bignum-buffer-in-place (bignum bignum-len)
  (bignum-negate-loop bignum bignum-len bignum)
  bignum)

(defun negate-bignum-in-place (bignum)
  (declare (inline negate-bignum-buffer-in-place))
  (negate-bignum-buffer-in-place bignum (%bignum-length bignum)))

(defun bignum-abs-buffer (bignum len)
  (unless (%bignum-0-or-plusp bignum len)
    (negate-bignum-buffer-in-place bignum len)))



;;;; Shifting.

(defconstant all-ones-digit #xFFFFFFFF)

(eval-when (compile eval)

;;; SHIFT-RIGHT-UNALIGNED -- Internal.
;;;
;;; This macro is used by BIGNUM-ASHIFT-RIGHT, BIGNUM-BUFFER-ASHIFT-RIGHT, and
;;; BIGNUM-LDB-BIGNUM-RES.  They supply a termination form that references
;;; locals established by this form.  Source is the source bignum.  Start-digit
;;; is the first digit in source from which we pull bits.  Start-pos is the
;;; first bit we want.  Res-len-form is the form that computes the length of
;;; the resulting bignum.  Termination is a DO termination form with a test and
;;; body.  When result is supplied, it is the variable to which this binds a
;;; newly allocated bignum.
;;;
;;; Given start-pos, 1-31 inclusively, of shift, we form the j'th resulting
;;; digit from high bits of the i'th source digit and the start-pos number of
;;; bits from the i+1'th source digit.
;;;
(defmacro shift-right-unaligned (source start-digit start-pos res-len-form
				 termination
				 &optional result)
  `(let* ((high-bits-in-first-digit (- digit-size ,start-pos))
	  (res-len ,res-len-form)
	  (res-len-1 (1- res-len))
	  ,@(if result `((,result (%allocate-bignum res-len)))))
     (declare (type bignum-index res-len res-len-1))
     (do ((i ,start-digit i+1)
	  (i+1 (1+ ,start-digit) (1+ i+1))
	  (j 0 (1+ j)))
	 ,termination
       (declare (type bignum-index i i+1 j))
       (setf (%bignum-ref ,(if result result source) j)
	     (%logior (%digit-logical-shift-right (%bignum-ref ,source i)
						  ,start-pos)
		      (%ashl (%bignum-ref ,source i+1)
			     high-bits-in-first-digit))))))

) ;EVAL-WHEN


;;; BIGNUM-ASHIFT-RIGHT -- Public.
;;;
;;; First compute the number of whole digits to shift, shifting them by
;;; skipping them when we start to pick up bits, and the number of bits to
;;; shift the remaining digits into place.  If the number of digits is greater
;;; than the length of the bignum, then the result is either 0 or -1.  If we
;;; shift on a digit boundary (that is, n-bits is zero), then we just copy
;;; digits.  The last branch handles the general case which uses a macro that a
;;; couple other routines use.  The fifth argument to the macro references
;;; locals established by the macro.
;;;
(defun bignum-ashift-right (bignum x)
  (declare (type bignum-type bignum)
	   (type unsigned-byte x))
  (let ((bignum-len (%bignum-length bignum)))
    (declare (type bignum-index bignum-len))
    (multiple-value-bind (digits n-bits)
			 (truncate x digit-size)
      (declare (type bignum-index digits))
      (cond
       ((>= digits bignum-len)
	(if (%bignum-0-or-plusp bignum bignum-len) 0 -1))
       ((zerop n-bits)
	(bignum-ashift-right-digits bignum digits))
       (t
	(shift-right-unaligned bignum digits n-bits (- bignum-len digits)
			       ((= j res-len-1)
				(setf (%bignum-ref res j)
				      (%ashr (%bignum-ref bignum i) n-bits))
				(%normalize-bignum res res-len))
			       res))))))

;;; BIGNUM-ASHIFT-RIGHT-DIGITS -- Internal.
;;;
(defun bignum-ashift-right-digits (bignum digits)
  (declare (type bignum-type bignum)
	   (type bignum-index digits))
  (let* ((res-len (- (%bignum-length bignum) digits))
	 (res (%allocate-bignum res-len)))
    (declare (type bignum-index res-len)
	     (type bignum-type res))
    (bignum-replace res bignum :start2 digits)
    (%normalize-bignum res res-len)))


;;; BIGNUM-BUFFER-ASHIFT-RIGHT -- Internal.
;;;
;;; GCD uses this for an in-place shifting operation.  This is different enough
;;; from BIGNUM-ASHIFT-RIGHT that it isn't worth folding the bodies into a
;;; macro, but they share the basic algorithm.  This routine foregoes a first
;;; test for digits being greater than or equal to bignum-len since that will
;;; never happen for its uses in GCD.  We did fold the last branch into a macro
;;; since it was duplicated a few times, and the fifth argument to it
;;; references locals established by the macro.
;;;
(defun bignum-buffer-ashift-right (bignum bignum-len x)
  (declare (type bignum-index bignum-len) (fixnum x))
  (multiple-value-bind (digits n-bits)
		       (truncate x digit-size)
    (declare (type bignum-index digits))
    (cond
     ((zerop n-bits)
      (let ((new-end (- bignum-len digits)))
	(bignum-replace bignum bignum :end1 new-end :start2 digits
			:end2 bignum-len)
	(%normalize-bignum-buffer bignum new-end)))
     (t
      (shift-right-unaligned bignum digits n-bits (- bignum-len digits)
			     ((= j res-len-1)
			      (setf (%bignum-ref bignum j)
				    (%ashr (%bignum-ref bignum i) n-bits))
			      (%normalize-bignum-buffer bignum res-len)))))))



;;; BIGNUM-ASHIFT-LEFT -- Public.
;;;
;;; This handles shifting a bignum buffer to provide fresh bignum data for some
;;; internal routines.  We know bignum is safe when called with bignum-len.
;;; First we compute the number of whole digits to shift, shifting them
;;; starting to store farther along the result bignum.  If we shift on a digit
;;; boundary (that is, n-bits is zero), then we just copy digits.  The last
;;; branch handles the general case.
;;;
(defun bignum-ashift-left (bignum x &optional bignum-len)
  (declare (type bignum-type bignum)
	   (fixnum x)
	   (type (or null bignum-index) bignum-len))
  (multiple-value-bind (digits n-bits)
		       (truncate x digit-size)
    (let* ((bignum-len (or bignum-len (%bignum-length bignum)))
	   (res-len (+ digits bignum-len 1)))
      (when (> res-len maximum-bignum-length)
	(error "Can't represent result of left shift."))
      (if (zerop n-bits)
	  (bignum-ashift-left-digits bignum bignum-len digits)
	  (bignum-ashift-left-unaligned bignum digits n-bits res-len)))))

;;; BIGNUM-ASHIFT-LEFT-DIGITS -- Internal.
;;;
(defun bignum-ashift-left-digits (bignum bignum-len digits)
  (declare (type bignum-index bignum-len digits))
  (let* ((res-len (+ bignum-len digits))
	 (res (%allocate-bignum res-len)))
    (declare (type bignum-index res-len))
    (bignum-replace res bignum :start1 digits :end1 res-len :end2 bignum-len
		    :from-end t)
    res))

;;; BIGNUM-ASHIFT-LEFT-UNALIGNED -- Internal.
;;;
;;; BIGNUM-TRUNCATE uses this to store into a bignum buffer by supplying res.
;;; When res comes in non-nil, then this foregoes allocating a result, and it
;;; normalizes the buffer instead of the would-be allocated result.
;;;
;;; We start storing into one digit higher than digits, storing a whole result
;;; digit from parts of two contiguous digits from bignum.  When the loop
;;; finishes, we store the remaining bits from bignum's first digit in the
;;; first non-zero result digit, digits.  We also grab some left over high
;;; bits from the last digit of bignum.
;;; 
(defun bignum-ashift-left-unaligned (bignum digits n-bits res-len
				     &optional (res nil resp))
  (declare (type bignum-index digits res-len)
	   (type (mod #.digit-size) n-bits))
  (let* ((remaining-bits (- digit-size n-bits))
	 (res-len-1 (1- res-len))
	 (res (or res (%allocate-bignum res-len))))
    (declare (type bignum-index res-len res-len-1))
    (do ((i 0 i+1)
	 (i+1 1 (1+ i+1))
	 (j (1+ digits) (1+ j)))
	((= j res-len-1)
	 (setf (%bignum-ref res digits)
	       (%ashl (%bignum-ref bignum 0) n-bits))
	 (setf (%bignum-ref res j)
	       (%ashr (%bignum-ref bignum i) remaining-bits))
	 (if resp
	     (%normalize-bignum-buffer res res-len)
	     (%normalize-bignum res res-len)))
      (declare (type bignum-index i i+1 j))
      (setf (%bignum-ref res j)
	    (%logior (%digit-logical-shift-right (%bignum-ref bignum i)
						 remaining-bits)
		     (%ashl (%bignum-ref bignum i+1) n-bits))))))


;;;; Relational operators.

;;; BIGNUM-PLUS-P -- Public.
;;;
;;; Return T iff bignum is positive.
;;; 
(defun bignum-plus-p (bignum)
  (declare (type bignum-type bignum))
  (%bignum-0-or-plusp bignum (%bignum-length bignum)))

;;; BIGNUM-COMPARE -- Public.
;;;
;;; This compares two bignums returning -1, 0, or 1, depending on whether a
;;; is less than, equal to, or greater than b.
;;;
(defun bignum-compare (a b)
  (declare (type bignum-type a b) (values (integer -1 1)))
  (let* ((len-a (%bignum-length a))
	 (len-b (%bignum-length b))
	 (a-plusp (%bignum-0-or-plusp a len-a))
	 (b-plusp (%bignum-0-or-plusp b len-b)))
    (declare (type bignum-index len-a len-b))
    (cond ((not (eq a-plusp b-plusp))
	   (if a-plusp 1 -1))
	  ((= len-a len-b)
	   (do ((i (1- len-a) (1- i)))
	       (())
	     (declare (type bignum-index i))
	     (let ((a-digit (%bignum-ref a i))
		   (b-digit (%bignum-ref b i)))
	       (declare (type bignum-element-type a-digit b-digit))
	       (when (%digit-greater a-digit b-digit)
		 (return 1))
	       (when (%digit-greater b-digit a-digit)
		 (return -1)))
	     (when (zerop i) (return 0))))
	  ((> len-a len-b)
	   (if a-plusp 1 -1))
	  (t (if a-plusp -1 1)))))


;;;; Float conversion.

;;; xxx-FLOAT-FROM-BITS  --  Internal
;;;
;;;    Make a single or double float with the specified significand, exponent
;;; and sign.
;;;
(defun single-float-from-bits (bits exp plusp)
  (declare (fixnum exp))
  (declare (optimize (ext:inhibit-warnings 3)))
  (let ((res (dpb exp
		  vm:single-float-exponent-byte
		  (logandc2 (ext:truly-the (unsigned-byte 31)
					   (%bignum-ref bits 1))
			    vm:single-float-hidden-bit))))
    (make-single-float
     (if plusp
	 res
	 (logior res (ash -1 vm:float-sign-shift))))))
;;;
(defun double-float-from-bits (bits exp plusp)
  (declare (fixnum exp))
  (declare (optimize (ext:inhibit-warnings 3)))
  (let ((hi (dpb exp
		 vm:double-float-exponent-byte
		 (logandc2 (ext:truly-the (unsigned-byte 31)
					  (%bignum-ref bits 2))
			   vm:double-float-hidden-bit))))
    (make-double-float
     (if plusp
	 hi
	 (logior hi (ash -1 vm:float-sign-shift)))
     (%bignum-ref bits 1))))
;;;
#+(and long-float x86)
(defun long-float-from-bits (bits exp plusp)
  (declare (fixnum exp))
  (declare (optimize (ext:inhibit-warnings 3)))
  (make-long-float
   (if plusp
       exp
       (logior exp (ash 1 15)))
   (%bignum-ref bits 2)
   (%bignum-ref bits 1)))


;;; BIGNUM-TO-FLOAT   --  Interface
;;;
;;;    Convert Bignum to a float in the specified Format, rounding to the best
;;; approximation.
;;;
(defun bignum-to-float (bignum format)
  (let* ((plusp (bignum-plus-p bignum))
	 (x (if plusp bignum (negate-bignum bignum)))
	 (len (bignum-integer-length x))
	 (digits (float-format-digits format))
	 (keep (+ digits digit-size))
	 (shift (- keep len))
	 (shifted (if (minusp shift)
		      (bignum-ashift-right x (- shift))
		      (bignum-ashift-left x shift)))
	 (low (%bignum-ref shifted 0))
	 (round-bit (ash 1 (1- digit-size))))
    (declare (type bignum-index len digits keep) (fixnum shift))
    (labels ((round-up ()
	       (let ((rounded (add-bignums shifted round-bit)))
		 (if (> (integer-length rounded) keep)
		     (float-from-bits (bignum-ashift-right rounded 1)
				      (1+ len))
		     (float-from-bits rounded len))))
	     (float-from-bits (bits len)
	       (declare (type bignum-index len))
	       (ecase format
		 (single-float
		  (single-float-from-bits
		   bits
		   (check-exponent len vm:single-float-bias
		                   vm:single-float-normal-exponent-max)
		   plusp))
		 (double-float
		  (double-float-from-bits
		   bits
		   (check-exponent len vm:double-float-bias
		                   vm:double-float-normal-exponent-max)
		   plusp))
		 #+long-float
		 (long-float
		  (long-float-from-bits
		   bits
		   (check-exponent len vm:long-float-bias
		                   vm:long-float-normal-exponent-max)
		   plusp))))
	     (check-exponent (exp bias max)
	       (declare (type bignum-index len))
	       (let ((exp (+ exp bias)))
		 (when (> exp max)
		   (error 'simple-type-error
			  :datum x
                          :format-control "Too large to be represented as a ~S:~%  ~S"
			  :format-arguments (list format x)
                          :expected-type format))
		 exp)))

    (cond
     ;;
     ;; Round down if round bit is 0.
     ((zerop (logand round-bit low))
      (float-from-bits shifted len))
     ;;
     ;; If only round bit is set, then round to even.
     ((and (= low round-bit)
	   (dotimes (i (- (%bignum-length x) (ceiling keep digit-size))
		       t)
	     (unless (zerop (%bignum-ref x i)) (return nil))))
      (let ((next (%bignum-ref shifted 1)))
	(if (oddp next)
	    (round-up)
	    (float-from-bits shifted len))))
     ;;
     ;; Otherwise, round up.
     (t
      (round-up))))))


;;;; Integer length and logcount

#+nil
(defun bignum-integer-length (bignum)
  (declare (type bignum-type bignum))
  (let* ((len (%bignum-length bignum))
	 (len-1 (1- len))
	 (digit (%bignum-ref bignum len-1)))
    (declare (type bignum-index len len-1)
	     (type bignum-element-type digit))
    (+ (integer-length (%fixnum-digit-with-correct-sign digit))
       (* len-1 digit-size))))

(defun bignum-buffer-integer-length (bignum len)
  (declare (type bignum-type bignum))
  (let* ((len-1 (1- len))
	 (digit (%bignum-ref bignum len-1)))
    (declare (type bignum-index len len-1)
	     (type bignum-element-type digit))
    (+ (integer-length (%fixnum-digit-with-correct-sign digit))
       (* len-1 digit-size))))

(defun bignum-integer-length (bignum)
  (declare (type bignum-type bignum))
  (bignum-buffer-integer-length bignum (%bignum-length bignum)))

(defun bignum-logcount (bignum)
  (declare (type bignum-type bignum))
  (let* ((length (%bignum-length bignum))
	 (plusp (%bignum-0-or-plusp bignum length))
	 (result 0))
    (declare (type bignum-index length)
	     (fixnum result))
    (do ((index 0 (1+ index)))
	((= index length) result)
      (let ((digit (%bignum-ref bignum index)))
	(declare (type bignum-element-type digit))
	(incf result (logcount (if plusp digit (%lognot digit))))))))

(defun bignum-logbitp (index bignum)
  (declare (type bignum-type bignum))
  ;; For bignums, locate the word we're interested in and test
  ;; the appropriate bit.  As in the fixnum case, if the index
  ;; is too big, the answer is the sign of the number.
  (let ((len (bignum::%bignum-length bignum)))
    (multiple-value-bind (word-index bit-index)
	(floor index digit-size)
      (if (>= word-index len)
	  (not (bignum-plus-p bignum))
	  (not (zerop (logand (ash 1 bit-index)
			      (%bignum-ref bignum word-index))))))))
  


;;;; Logical operations.

;;; NOT.
;;;

;;; BIGNUM-LOGICAL-NOT -- Public.
;;;
(defun bignum-logical-not (a)
  (declare (type bignum-type a))
  (let* ((len (%bignum-length a))
	 (res (%allocate-bignum len)))
    (declare (type bignum-index len))
    (dotimes (i len res)
      (declare (type bignum-index i))
      (setf (%bignum-ref res i) (%lognot (%bignum-ref a i))))))


;;; AND.
;;;

;;; BIGNUM-LOGICAL-AND -- Public.
;;;
(defun bignum-logical-and (a b)
  (declare (type bignum-type a b))
  (let* ((len-a (%bignum-length a))
	 (len-b (%bignum-length b))
	 (a-plusp (%bignum-0-or-plusp a len-a))
	 (b-plusp (%bignum-0-or-plusp b len-b)))
    (declare (type bignum-index len-a len-b))
    (cond
     ((< len-a len-b)
      (if a-plusp
	  (logand-shorter-positive a len-a b (%allocate-bignum len-a))
	  (logand-shorter-negative a len-a b len-b (%allocate-bignum len-b))))
     ((< len-b len-a)
      (if b-plusp
	  (logand-shorter-positive b len-b a (%allocate-bignum len-b))
	  (logand-shorter-negative b len-b a len-a (%allocate-bignum len-a))))
     (t (logand-shorter-positive a len-a b (%allocate-bignum len-a))))))

;;; LOGAND-SHORTER-POSITIVE -- Internal.
;;;
;;; This takes a shorter bignum, a and len-a, that is positive.  Because this
;;; is AND, we don't care about any bits longer than a's since its infinite 0
;;; sign bits will mask the other bits out of b.  The result is len-a big.
;;;
(defun logand-shorter-positive (a len-a b res)
  (declare (type bignum-type a b res)
	   (type bignum-index len-a))
  (dotimes (i len-a)
    (declare (type bignum-index i))
    (setf (%bignum-ref res i)
	  (%logand (%bignum-ref a i) (%bignum-ref b i))))
  (%normalize-bignum res len-a))

;;; LOGAND-SHORTER-NEGATIVE -- Internal.
;;;
;;; This takes a shorter bignum, a and len-a, that is negative.  Because this
;;; is AND, we just copy any bits longer than a's since its infinite 1 sign
;;; bits will include any bits from b.  The result is len-b big.
;;;
(defun logand-shorter-negative (a len-a b len-b res)
  (declare (type bignum-type a b res)
	   (type bignum-index len-a len-b))
  (dotimes (i len-a)
    (declare (type bignum-index i))
    (setf (%bignum-ref res i)
	  (%logand (%bignum-ref a i) (%bignum-ref b i))))
  (do ((i len-a (1+ i)))
      ((= i len-b))
    (declare (type bignum-index i))
    (setf (%bignum-ref res i) (%bignum-ref b i)))
  (%normalize-bignum res len-b))

;;; IOR.
;;;

;;; BIGNUM-LOGICAL-IOR -- Public.
;;;
(defun bignum-logical-ior (a b)
  (declare (type bignum-type a b))
  (let* ((len-a (%bignum-length a))
	 (len-b (%bignum-length b))
	 (a-plusp (%bignum-0-or-plusp a len-a))
	 (b-plusp (%bignum-0-or-plusp b len-b)))
    (declare (type bignum-index len-a len-b))
    (cond
     ((< len-a len-b)
      (if a-plusp
	  (logior-shorter-positive a len-a b len-b (%allocate-bignum len-b))
	  (logior-shorter-negative a len-a b len-b (%allocate-bignum len-b))))
     ((< len-b len-a)
      (if b-plusp
	  (logior-shorter-positive b len-b a len-a (%allocate-bignum len-a))
	  (logior-shorter-negative b len-b a len-a (%allocate-bignum len-a))))
     (t (logior-shorter-positive a len-a b len-b (%allocate-bignum len-a))))))

;;; LOGIOR-SHORTER-POSITIVE -- Internal.
;;;
;;; This takes a shorter bignum, a and len-a, that is positive.  Because this
;;; is IOR, we don't care about any bits longer than a's since its infinite
;;; 0 sign bits will mask the other bits out of b out to len-b.  The result
;;; is len-b long.
;;;
(defun logior-shorter-positive (a len-a b len-b res)
  (declare (type bignum-type a b res)
	   (type bignum-index len-a len-b))
  (dotimes (i len-a)
    (declare (type bignum-index i))
    (setf (%bignum-ref res i)
	  (%logior (%bignum-ref a i) (%bignum-ref b i))))
  (do ((i len-a (1+ i)))
      ((= i len-b))
    (declare (type bignum-index i))
    (setf (%bignum-ref res i) (%bignum-ref b i)))
  (%normalize-bignum res len-b))

;;; LOGIOR-SHORTER-NEGATIVE -- Internal.
;;;
;;; This takes a shorter bignum, a and len-a, that is negative.  Because this
;;; is IOR, we just copy any bits longer than a's since its infinite 1 sign
;;; bits will include any bits from b.  The result is len-b long.
;;;
(defun logior-shorter-negative (a len-a b len-b res)
  (declare (type bignum-type a b res)
	   (type bignum-index len-a len-b))
  (dotimes (i len-a)
    (declare (type bignum-index i))
    (setf (%bignum-ref res i)
	  (%logior (%bignum-ref a i) (%bignum-ref b i))))
  (do ((i len-a (1+ i))
       (sign (%sign-digit a len-a)))
      ((= i len-b))
    (declare (type bignum-index i))
    (setf (%bignum-ref res i) sign))
  (%normalize-bignum res len-b))

;;; XOR.
;;;

;;; BIGNUM-LOGICAL-XOR -- Public.
;;;
(defun bignum-logical-xor (a b)
  (declare (type bignum-type a b))
  (let ((len-a (%bignum-length a))
	(len-b (%bignum-length b)))
    (declare (type bignum-index len-a len-b))
    (if (< len-a len-b)
	(bignum-logical-xor-aux a len-a b len-b (%allocate-bignum len-b))
	(bignum-logical-xor-aux b len-b a len-a (%allocate-bignum len-a)))))

;;; BIGNUM-LOGICAL-XOR-AUX -- Internal.
;;;
;;; This takes the shorter of two bignums in a and len-a.  Res is len-b
;;; long.  Do the XOR.
;;;
(defun bignum-logical-xor-aux (a len-a b len-b res)
  (declare (type bignum-type a b res)
	   (type bignum-index len-a len-b))
  (dotimes (i len-a)
    (declare (type bignum-index i))
    (setf (%bignum-ref res i)
	  (%logxor (%bignum-ref a i) (%bignum-ref b i))))
  (do ((i len-a (1+ i))
       (sign (%sign-digit a len-a)))
      ((= i len-b))
    (declare (type bignum-index i))
    (setf (%bignum-ref res i) (%logxor sign (%bignum-ref b i))))
  (%normalize-bignum res len-b))



;;;; LDB (load byte)

#|
FOR NOW WE DON'T USE LDB OR DPB.  WE USE SHIFTS AND MASKS IN NUMBERS.LISP WHICH
IS LESS EFFICIENT BUT EASIER TO MAINTAIN.  BILL SAYS THIS CODE CERTAINLY WORKS!

Not really.  It doesn't handle negative numbers very well and still
needs work.  Having said that, I (RLT) think bignum-load-byte and
friends is working.

|#

(defconstant maximum-fixnum-bits #+ibm-rt-pc 27 #-ibm-rt-pc 30)

;;; BIGNUM-LOAD-BYTE -- Public.
;;;
(defun bignum-load-byte (byte bignum)
  (declare (type bignum-type bignum))
  (let ((byte-len (byte-size byte))
	(byte-pos (byte-position byte)))
    (if (< byte-len maximum-fixnum-bits)
	(bignum-ldb-fixnum-res bignum byte-len byte-pos)
	(bignum-ldb-bignum-res bignum byte-len byte-pos))))

;;; Create a 32-bit word containing the specified number of 1 bits,
;;; right-justified in the 32-bit word.
(declaim (inline %make-ones))
(defun %make-ones (len)
  (declare (type (integer 0 #.digit-size) len)
	   (optimize (speed 3) (safety 0)))
  (if (< len digit-size)
      (1- (ash 1 len))
      #.(1- (ash 1 digit-size))))

;;; BIGNUM-LDB-FIXNUM-RES -- Internal.
;;;
;;; This returns a fixnum result of loading a byte from a bignum.  In order, we
;;; check for the following conditions:
;;;    Insufficient bignum digits to start loading a byte --
;;;       Return 0 or byte-len 1's depending on sign of bignum.
;;;    One bignum digit containing the whole byte spec --
;;;       Grab 'em, shift 'em, and mask out what we don't want.
;;;    Insufficient bignum digits to cover crossing a digit boundary --
;;;       Grab the available bits in the last digit, and or in whatever
;;;       virtual sign bits we need to return a full byte spec.
;;;    Else (we cross a digit boundary with all bits available) --
;;;       Make a couple masks, grab what we want, shift it around, and
;;;       LOGIOR it all together.
;;; Because (< maximum-fixnum-bits digit-size) and
;;;         (< byte-len maximum-fixnum-bits),
;;; we only cross one digit boundary if any.
;;;
(defun bignum-ldb-fixnum-res (bignum byte-len byte-pos)
  (declare (type (integer 0 29) byte-len)
	   (type (and fixnum unsigned-byte) byte-pos)
	   (optimize (speed 3) (safety 0)))
  (multiple-value-bind (skipped-digits pos)
      (truncate byte-pos digit-size)
    (let ((bignum-len (%bignum-length bignum))
	  (s-digits+1 (1+ skipped-digits)))
      (declare (type bignum-index bignum-len s-digits+1))
      (if (>= skipped-digits bignum-len)
	  (if (%bignum-0-or-plusp bignum bignum-len)
	      0
	      (%make-ones byte-len))
	  (let ((end (+ pos byte-len)))
	    (cond ((<= end digit-size)
		   ;; The desired byte is completely contained in the
		   ;; current digit.  Extract it out.
		   (logand (%ashr (%bignum-ref bignum skipped-digits) pos)
			   (%make-ones byte-len)))
		  ((>= s-digits+1 bignum-len)
		   ;; The desired byte is in the bignum digit
		   ;; containing the sign.  Just extract out the
		   ;; desired part, being careful with the sign.
		   (let* ((available-bits (- digit-size pos))
			  (res (%digit-logical-shift-right (%bignum-ref bignum skipped-digits) pos)))
		     (if (%bignum-0-or-plusp bignum bignum-len)
			 res
			 (logior (%ashl (%make-ones (- end digit-size))
					available-bits)
				 res))))
		  (t
		   ;; Ok, the desired byte is contained in two digits.
		   ;; Extract out the desired pieces from the two
		   ;; digits and merge them into one.
		   (let* ((high-bits-in-first-digit (- digit-size pos))
			  (low-bits-in-next-digit (- end digit-size))
			  (low-mask (%make-ones low-bits-in-next-digit)))
		     (declare (type bignum-element-type low-mask))
		     (logior (%ashl (logand (%bignum-ref bignum s-digits+1)
					    low-mask)
				    high-bits-in-first-digit)
			     (%digit-logical-shift-right (%bignum-ref bignum skipped-digits)
							 pos))))))))))

;;; BIGNUM-LDB-BIGNUM-RES -- Internal.
;;;
;;; This returns a bignum result of loading a byte from a bignum.  In order, we
;;; check for the following conditions:
;;;    Insufficient bignum digits to start loading a byte --
;;;    Byte-pos starting on a digit boundary --
;;;    Byte spec contained in one bignum digit --
;;;       Grab the bits we want and stick them in a single digit result.
;;;       Since we know byte-pos is non-zero here, we know our single digit
;;;       will have a zero high sign bit.
;;;    Else (unaligned multiple digits) --
;;;       This is like doing a shift right combined with either masking
;;;       out unwanted high bits from bignum or filling in virtual sign
;;;       bits if bignum had insufficient bits.  We use SHIFT-RIGHT-ALIGNED
;;;       and reference lots of local variables this macro establishes.
;;;
(defun bignum-ldb-bignum-res (bignum byte-len byte-pos)
  (declare (type bignum bignum)
	   (type (and fixnum (integer 33)) byte-len)
	   (type (and fixnum unsigned-byte) byte-pos)
	   (optimize (speed 3)))
  (multiple-value-bind (skipped-digits pos)
      (truncate byte-pos digit-size)
    (let ((bignum-len (%bignum-length bignum)))
      (declare (type bignum-index bignum-len))
      (cond
       ((>= skipped-digits bignum-len)
	(make-bignum-virtual-ldb-bits bignum bignum-len byte-len))
       ((zerop pos)
	(make-aligned-ldb-bignum bignum bignum-len byte-len skipped-digits))
       ((< (+ pos byte-len) digit-size)
	(let ((res (%allocate-bignum 1)))
	  (setf (%bignum-ref res 0)
		(logand (%ashr (%bignum-ref bignum skipped-digits) pos)
			(%make-ones byte-len)))
	  res))
       (t
	(make-unaligned-ldb-bignum bignum bignum-len
				   byte-len skipped-digits pos))))))

;;; MAKE-BIGNUM-VIRTUAL-LDB-BITS -- Internal.
;;;
;;; This returns bits from bignum that don't physically exist.  These are
;;; all zero or one depending on the sign of the bignum.
;;;
(defun make-bignum-virtual-ldb-bits (bignum bignum-len byte-len)
  (declare (type bignum bignum)
	   (type fixnum bignum-len byte-len)
	   (optimize speed))
  (if (%bignum-0-or-plusp bignum bignum-len)
      0
      (multiple-value-bind (res-len-1 extra)
			   (truncate byte-len digit-size)
	(declare (type bignum-index res-len-1))
	(let* ((res-len (1+ res-len-1))
	       (res (%allocate-bignum res-len)))
	  (declare (type bignum-index res-len))
	  (do ((j 0 (1+ j)))
	      ((= j res-len-1)
	       (setf (%bignum-ref res j) (%make-ones extra))
	       (%normalize-bignum res res-len))
	    (declare (type bignum-index j))
	    (setf (%bignum-ref res j) all-ones-digit))))))

;;; MAKE-ALIGNED-LDB-BIGNUM -- Internal.
;;;
;;; Since we are picking up aligned digits, we just copy the whole digits
;;; we want and fill in extra bits.  We might have a byte-len that extends
;;; off the end of the bignum, so we may have to fill in extra 1's if the
;;; bignum is negative.
;;;
(defun make-aligned-ldb-bignum (bignum bignum-len byte-len skipped-digits)
  (declare (type bignum bignum)
	   (type fixnum bignum-len byte-len skipped-digits)
	   (optimize speed))
  (multiple-value-bind (res-len-1 extra)
		       (truncate byte-len digit-size)
    (declare (type bignum-index res-len-1))
    (let* ((res-len (1+ res-len-1))
	   (res (%allocate-bignum res-len)))
      (declare (type bignum-index res-len))
      (do ((i skipped-digits (1+ i))
	   (j 0 (1+ j)))
	  ((or (= j res-len-1) (= i bignum-len))
	   (cond ((< i bignum-len)
		  (setf (%bignum-ref res j)
			(logand (%bignum-ref bignum i)
				(the bignum-element-type (%make-ones extra)))))
		 ((%bignum-0-or-plusp bignum bignum-len))
		 (t
		  (do ((j j (1+ j)))
		      ((= j res-len-1)
		       (setf (%bignum-ref res j) (%make-ones extra)))
		    (setf (%bignum-ref res j) all-ones-digit))))
	   (%normalize-bignum res res-len))
      (declare (type bignum-index i j))
      (setf (%bignum-ref res j) (%bignum-ref bignum i))))))

;;; MAKE-UNALIGNED-LDB-BIGNUM -- Internal.
;;;
;;; This grabs unaligned bignum bits from bignum assuming byte-len causes at
;;; least one digit boundary crossing.  We use SHIFT-RIGHT-UNALIGNED referencing
;;; lots of local variables established by it.
;;;
(defun make-unaligned-ldb-bignum (bignum bignum-len byte-len skipped-digits pos)
  (declare (type bignum bignum)
	   (type fixnum bignum-len byte-len skipped-digits)
	   (type (integer 0 32) pos)
	   (optimize speed))
  (multiple-value-bind (res-len-1 extra)
      (truncate byte-len digit-size)
    (let* ((low-mask (%make-ones pos)
	     #+nil (1- (ash 1 pos))))
      (shift-right-unaligned
       bignum skipped-digits pos (1+ res-len-1)
       ((or (= j res-len-1) (= i+1 bignum-len))
	(cond ((= j res-len-1)
	       ;; We're here if the bignum result is basically done.
	       (cond
		 ((< extra high-bits-in-first-digit)
		  (setf (%bignum-ref res j)
			(logand (%digit-logical-shift-right (%bignum-ref bignum i) pos)
				(%make-ones extra))))
		 ((= i+1 bignum-len)
		  ;; If we're at the last digit of the bignum,
		  ;; we need to merge in the sign correctly.
		  (setf (%bignum-ref res j)
			(logand
			 (%digit-logical-shift-right (%bignum-ref bignum i) pos)
			 (%make-ones extra)))
		  (unless (%bignum-0-or-plusp bignum bignum-len)
		    (setf (%bignum-ref res j)
			  (logior (%bignum-ref res j)
				  (%ashl (%make-ones
					  (- extra high-bits-in-first-digit))
					 high-bits-in-first-digit)))))
		 (t
		  ;; We're not at the last digit, so just grab
		  ;; bits from the current digit, and the next
		  ;; to get the desired result.
		  (setf (%bignum-ref res j)
			(logand
			 (logior
			  (%digit-logical-shift-right (%bignum-ref bignum i) pos)
			  (%ashl (%bignum-ref bignum i+1) high-bits-in-first-digit))
			 (%make-ones extra))))))
	      (t
	       (setf (%bignum-ref res j)
		     (%digit-logical-shift-right (%bignum-ref bignum i) pos))
	       (unless (%bignum-0-or-plusp bignum bignum-len)
		 ;; Fill in upper half of this result digit with 1's.
		 (setf (%bignum-ref res j)
		       (logior (%bignum-ref res j)
			       (%ashl low-mask high-bits-in-first-digit)))
		 ;; Fill in any extra 1's we need to be byte-len long.
		 (do ((j (1+ j) (1+ j)))
		     ((>= j res-len-1)
		      (setf (%bignum-ref res j) (%make-ones extra)))
		   (setf (%bignum-ref res j) all-ones-digit)))))
	(%normalize-bignum res res-len))
       res))))



;;;; DPB (deposit byte).  

(defun bignum-deposit-byte (new-byte byte-spec bignum)
  (declare (type bignum-type bignum))
  (let* ((byte-len (byte-size byte-spec))
	 (byte-pos (byte-position byte-spec))
	 (bignum-len (%bignum-length bignum))
	 (bignum-plusp (%bignum-0-or-plusp bignum bignum-len))
	 (byte-end (+ byte-pos byte-len))
	 (res-len (1+ (max (ceiling byte-end digit-size) bignum-len)))
	 (res (%allocate-bignum res-len)))
    (declare (type bignum-index bignum-len res-len))
    (format t "BIGNUM-DEPOSIT-BYTE~%")
    (format t "bignum-len = ~A~%" bignum-len)
    (format t "res-len = ~A~%" res-len)
    ;;
    ;; Fill in an extra sign digit in case we set what would otherwise be the
    ;; last digit's last bit.  Normalize at the end in case this was
    ;; unnecessary.
    (unless bignum-plusp
      ;; Actually, we need to fill all words past the end of the
      ;; bignum with sign digits.
      (dotimes (k (- res-len bignum-len))
	(setf (%bignum-ref res (+ k bignum-len)) all-ones-digit)))
    (multiple-value-bind (end-digit end-bits)
			 (truncate byte-end digit-size)
      (declare (type bignum-index end-digit))
      ;;
      ;; Fill in bits from bignum up to byte-pos.
      (multiple-value-bind (pos-digit pos-bits)
			   (truncate byte-pos digit-size)
	(declare (type bignum-index pos-digit))
	(do ((i 0 (1+ i))
	     (end (min pos-digit bignum-len)))
	    ((= i end)
	     ;;(format t "end = ~A (min ~A ~A)~%" end pos-digit bignum-len)
	     (cond ((< i bignum-len)
		    #|
		    (format t "bignum-dpb:  i < bignum-len ~A ~A~%" i bignum-len)
		    (format t "  pos-bits = ~A~%" pos-bits)
		    (format t "  res = ~:,,,8X~%"
			    (ldb (byte (* (%bignum-length res) 32) 0) res))
		    |#
		    (unless (zerop pos-bits)
		      (setf (%bignum-ref res i)
			    (logand (%bignum-ref bignum i)
				    (%make-ones pos-bits))))
		    #+nil
		    (format t "  res = ~:,,,8X~%"
			    (ldb (byte (* (%bignum-length res) 32) 0) res))
		    )
		   (bignum-plusp)
		   (t
		    ;;(format t "bignum-dpb:  T~%")
		    (do ((i i (1+ i)))
			((= i pos-digit)
			 (unless (zerop pos-bits)
			   (setf (%bignum-ref res i) (%make-ones pos-bits))))
		      (setf (%bignum-ref res i) all-ones-digit)))))
	  (setf (%bignum-ref res i) (%bignum-ref bignum i)))
	;;
	;; Fill in bits from new-byte.
	(if (typep new-byte 'fixnum)
	    (deposit-fixnum-bits new-byte byte-len pos-digit pos-bits
				 end-digit end-bits res)
	    (deposit-bignum-bits new-byte byte-len pos-digit pos-bits
				 end-digit end-bits res)))
      ;;
      ;; Fill in remaining bits from bignum after byte-spec.
      (Format t "end-digit bignum-len = ~A ~A~%" end-digit bignum-len)
      (when (<= end-digit bignum-len)
	(setf (%bignum-ref res end-digit)
	      (logior (logand (%bignum-ref bignum end-digit)
			      (%ashl (%make-ones (- digit-size end-bits))
				     end-bits))
		      ;; DEPOSIT-FIXNUM-BITS and DEPOSIT-BIGNUM-BITS only store
		      ;; bits from new-byte into res's end-digit element, so
		      ;; we don't need to mask out unwanted high bits.
		      (%bignum-ref res end-digit)))
	(do ((i (1+ end-digit) (1+ i)))
	    ((>= i bignum-len))
	  (setf (%bignum-ref res i) (%bignum-ref bignum i)))))
    (%normalize-bignum res res-len)))

;;; DEPOSIT-FIXNUM-BITS -- Internal.
;;;
;;; This starts at result's pos-digit skipping pos-bits, and it stores bits
;;; from new-byte, a fixnum, into result.  It effectively stores byte-len
;;; number of bits, but never stores past end-digit and end-bits in result.
;;; The first branch fires when all the bits we want from new-byte are present;
;;; if byte-len crosses from the current result digit into the next, the last
;;; argument to DEPOSIT-FIXNUM-DIGIT is a mask for those bits.  The second
;;; branch handles the need to grab more bits than the fixnum new-byte has, but
;;; new-byte is positive; therefore, any virtual bits are zero.  The mask for
;;; bits that don't fit in the current result digit is simply the remaining
;;; bits in the bignum digit containing new-byte; we don't care if we store
;;; some extra in the next result digit since they will be zeros.  The last
;;; branch handles the need to grab more bits than the fixnum new-byte has, but
;;; new-byte is negative; therefore, any virtual bits must be explicitly filled
;;; in as ones.  We call DEPOSIT-FIXNUM-DIGIT to grab what bits actually exist
;;; and to fill in the current result digit.
;;;
(defun deposit-fixnum-bits (new-byte byte-len pos-digit pos-bits 
			    end-digit end-bits result)
  (declare (type bignum-index pos-digit end-digit))
  (let ((other-bits (- digit-size pos-bits))
	(new-byte-digit (%fixnum-to-digit new-byte)))
    (declare (type bignum-element-type new-byte-digit))
    (cond ((< byte-len maximum-fixnum-bits)
	   (format t "deposit-fixnum-bits:  byte-len < maximum-fixnum-bits~%")
	   (deposit-fixnum-digit new-byte-digit byte-len pos-digit pos-bits
				 other-bits result
				 (- byte-len other-bits)))
	  ;; Can't do this because what happens if new-byte is a
	  ;; fixnum, but the byte-spec is larger than a fixnum?  Some
	  ;; of the higher bits may not be set properly.
	  #+nil
	  ((or (plusp new-byte) (zerop new-byte))
	   (format t "deposit-fixnum-bits:  new-byte >= 0~%")
	   (deposit-fixnum-digit new-byte-digit byte-len pos-digit pos-bits
				 other-bits result pos-bits))
	  (t
	   (format t "deposit-fixnum-bits:  T~%")
	   (multiple-value-bind
	       (digit bits)
	       (deposit-fixnum-digit new-byte-digit byte-len pos-digit pos-bits
				     other-bits result
				     (if (< (- byte-len other-bits) digit-size)
					 (- byte-len other-bits)
					 digit-size))
	     (declare (type bignum-index digit))
	     (cond ((< digit end-digit)
		    (setf (%bignum-ref result digit)
			  (logior (%bignum-ref result digit)
				  (%ashl (%make-ones (- digit-size bits)) bits)))
		    (do ((i (1+ digit) (1+ i)))
			((= i end-digit)
			 (setf (%bignum-ref result i) (%make-ones end-bits)))
		      (setf (%bignum-ref result i) all-ones-digit)))
		   ((> digit end-digit))
		   ((< bits end-bits)
		    (setf (%bignum-ref result digit)
			  (logior (%bignum-ref result digit)
				  (%ashl (%make-ones (- end-bits bits))
					 bits))))))))))

;;; DEPOSIT-FIXNUM-DIGIT -- Internal.
;;;
;;; This fills in the current result digit from new-byte-digit.  The first case
;;; handles everything we want fitting in the current digit, and other-bits is
;;; the number of bits remaining to be filled in result's current digit.  This
;;; number is digit-size minus pos-bits.  The second branch handles filling in
;;; result's current digit, and it shoves the unused bits of new-byte-digit
;;; into the next result digit.  This is correct regardless of new-byte-digit's
;;; sign.  It returns the new current result digit and how many bits already
;;; filled in the result digit.
;;;
(defun deposit-fixnum-digit (new-byte-digit byte-len pos-digit pos-bits
			     other-bits result next-digit-bits-needed)
  (declare (type bignum-index pos-digit)
	   (type bignum-element-type new-byte-digit))
  (cond ((<= byte-len other-bits)
	 ;; Bits from new-byte fit in the current result digit.
	 (format t "dep-fixnum: byte-len < other-bits~%")
	 (format t " pos-digit = ~A~%" pos-digit)
	 (format t " result = ~:,,,8x~%"
		 (ldb (byte (* 32 (%bignum-length result)) 0) result))
	 (Format t " new-byte-digit = ~X~%" new-byte-digit)
	 (Format t "  pos-bits      = ~A~%" pos-bits)
	 (format t "  byte-len      = ~A~%" byte-len)
	 (let ((word (logior (logandc2 (%bignum-ref result pos-digit)
				       (%ashl (%make-ones byte-len) pos-bits))
			     (%ashl (logand new-byte-digit (%make-ones byte-len))
				    pos-bits))))
	   ;;(format t " new word = ~:,,,8x~%" word)
	   (setf (%bignum-ref result pos-digit) word))
	 (if (= byte-len other-bits)
	     (values (1+ pos-digit) 0)
	     (values pos-digit (+ byte-len pos-bits))))
	(t
	 ;; Some of new-byte's bits go in current result digit.
	 (format t "dep-fixnum: T~%")
	 (setf (%bignum-ref result pos-digit)
	       (logior (%bignum-ref result pos-digit)
		       (%ashl (logand new-byte-digit (%make-ones other-bits))
			      pos-bits)))

	 (Format t "  result = ~:,,,8X~%" result)
	 (Format t "  result = ~:,,,8X~%" (ldb (byte (* (%bignum-length result) 32) 0) result))

	 (let ((pos-digit+1 (1+ pos-digit)))

	   (format t "  pos-digit = ~A~%" pos-digit)
	   (format t "  other-bits = ~A~%" other-bits)
	   (format t "  new-byte-digit = ~X~%" new-byte-digit)
	   (format t "  Merge in       = ~X~%" (logand (%ashr new-byte-digit other-bits)
						       ;; Must LOGAND after shift here.
						       (%make-ones next-digit-bits-needed)))

	   ;; The rest of new-byte's bits go in the next result digit.

	   (format t "  next-digit-bits-needed = ~A~%" next-digit-bits-needed)
	   (format t "  current digit = ~X~%" (%bignum-ref result pos-digit))
	   (format t "  next-digit = ~X~%" (%bignum-ref result pos-digit+1))
	   (format t "  next-digit+1 = ~X~%" (%bignum-ref result (1+ pos-digit+1)))

	   #+nil
	   (setf (%bignum-ref result pos-digit+1)
		 (logior (logandc2 (%bignum-ref result pos-digit+1)
				 (%make-ones next-digit-bits-needed))
			 (logand (%ashr new-byte-digit other-bits)
				 ;; Must LOGAND after shift here.
				 (%make-ones next-digit-bits-needed))))
	   #+nil
	   (setf (%bignum-ref result pos-digit+1)
		 (logand (ash new-byte-digit (- other-bits))
			 ;; Must LOGAND after shift here.
			 (%make-ones next-digit-bits-needed)))
	   (setf (%bignum-ref result pos-digit+1)
		 (logior (logandc2 (%bignum-ref result pos-digit+1)
				 (%make-ones next-digit-bits-needed))
			 (logand (ash new-byte-digit (- other-bits))
				 ;; Must LOGAND after shift here.
				 (%make-ones next-digit-bits-needed))))
	   #||
	   (Format t "  result = ~:,,,8X~%" result)
	   (Format t "  result = ~:,,,8X~%" (ldb (byte (* (%bignum-length result) 32) 0) result))
	   (format t "  next-digit-bits-needed, digit-size = ~A ~A~%" next-digit-bits-needed digit-size)
	   ||#
	   (if (= next-digit-bits-needed digit-size)
	       (values (1+ pos-digit+1) 0)
	       (values pos-digit+1 next-digit-bits-needed))))))

;;; DEPOSIT-BIGNUM-BITS -- Internal.
;;;
;;; This starts at result's pos-digit skipping pos-bits, and it stores bits
;;; from new-byte, a bignum, into result.  It effectively stores byte-len
;;; number of bits, but never stores past end-digit and end-bits in result.
;;; When handling a starting bit unaligned with a digit boundary, we check
;;; in the second branch for the byte spec fitting into the pos-digit element
;;; after after pos-bits; DEPOSIT-UNALIGNED-BIGNUM-BITS expects at least one
;;; digit boundary crossing.
;;;
(defun deposit-bignum-bits (bignum-byte byte-len pos-digit pos-bits 
			    end-digit end-bits result)
  (declare (type bignum-index pos-digit end-digit))
  (format t "deposit-bignum-bits: result = ~:,,,8X~%"
	  (ldb (byte (* 32 (%bignum-length result)) 0) result))
  (format t "deposit-bignum-bits: result = ~:,,,8X~%" result)
  (cond ((zerop pos-bits)
	 (format t " cond: pos-bits = 0~%")
	 (deposit-aligned-bignum-bits bignum-byte pos-digit end-digit end-bits
				      result))
	((or (= end-digit pos-digit)
	     (and (= end-digit (1+ pos-digit))
		  (zerop end-bits)))
	 (format t " cond: mid~%")
	 (setf (%bignum-ref result pos-digit)
	       (logior (%bignum-ref result pos-digit)
		       (%ashl (logand (%bignum-ref bignum-byte 0)
				      (%make-ones byte-len))
			      pos-bits))))
	(t
	 (format t " cond: T~%")
	 (deposit-unaligned-bignum-bits bignum-byte pos-digit pos-bits
					  end-digit end-bits result))))

;;; DEPOSIT-ALIGNED-BIGNUM-BITS -- Internal.
;;;
;;; This deposits bits from bignum-byte into result starting at pos-digit and
;;; the zero'th bit.  It effectively only stores bits to end-bits in the
;;; end-digit element of result.  The loop termination code takes care of
;;; picking up the last digit's bits or filling in virtual negative sign bits.
;;;
(defun deposit-aligned-bignum-bits (bignum-byte pos-digit end-digit end-bits
				    result)
  (declare (type bignum-index pos-digit end-digit))
  (let* ((bignum-len (%bignum-length bignum-byte))
	 (bignum-plusp (%bignum-0-or-plusp bignum-byte bignum-len)))
    (declare (type bignum-index bignum-len))
    (do ((i 0 (1+ i ))
	 (j pos-digit (1+ j)))
	((or (= j end-digit) (= i bignum-len))
	 (cond ((= j end-digit)
		(format t "  deposit-aligned: j = end-digit (~A)~%" j)
		(format t "    i, bignum-len = ~A ~A~%" i bignum-len)
		(cond ((< i bignum-len)
		       (format t "      result[~A] = ~:,,,8x~%" j (%bignum-ref result j))
		       (let ((word
			      #+nil
			       (logand (%bignum-ref bignum-byte i)
				       (%make-ones end-bits))
			       (logior (logandc2 (%bignum-ref result j)
						 (%make-ones end-bits))
				       (logand (%bignum-ref bignum-byte i)
					       (%make-ones end-bits)))))
		       (format t "      new = ~:,,,8x~%" word)
		       (setf (%bignum-ref result j) word)))
		      (bignum-plusp)
		      (t
		       (setf (%bignum-ref result j) (%make-ones end-bits)))))
	       (bignum-plusp)
	       (t
		(format t "  deposit-aligned: cond T~%")
		(do ((j j (1+ j)))
		    ((= j end-digit)
		     (setf (%bignum-ref result j) (%make-ones end-bits)))
		  (setf (%bignum-ref result j) all-ones-digit)))))
      (setf (%bignum-ref result j) (%bignum-ref bignum-byte i)))))

;;; DEPOSIT-UNALIGNED-BIGNUM-BITS -- Internal.
;;;
;;; This assumes at least one digit crossing.
;;;
(defun deposit-unaligned-bignum-bits (bignum-byte pos-digit pos-bits
				      end-digit end-bits result)
  (declare (type bignum-index pos-digit end-digit))
  (let* ((bignum-len (%bignum-length bignum-byte))
	 (bignum-plusp (%bignum-0-or-plusp bignum-byte bignum-len))
	 (low-mask (%make-ones pos-bits))
	 (bits-past-pos-bits (- digit-size pos-bits))
	 (high-mask (%make-ones bits-past-pos-bits)))
    (declare (type bignum-element-type low-mask high-mask)
	     (type bignum-index bignum-len))
    (format t " deposit-unaligned: start result = ~:,,,8X~%"
	    (ldb (byte (* 32 (%bignum-length result)) 0) result))
    (format t "   pos-digit = ~A~%" pos-digit)
    (format t "   pos-bits  = ~A~%" pos-bits)
    (format t "   end-digit = ~A~%" end-digit)
    (format t "   end-bits  = ~A~%" end-bits)
    ;; i is the word index to bignum-byte
    ;; j is the word index to the result
    (do ((i 0 (1+ i))
	 (j pos-digit j+1)
	 (j+1 (1+ pos-digit) (1+ j+1)))
	((or (= j+1 end-digit) (= i bignum-len))
	 (format t "  deposit-unaligned: result = ~:,,,8X~%"
		 (ldb (byte (* 32 (%bignum-length result)) 0) result))
	 (format t "  deposit-unaligned: result = ~:,,,8X~%" result)
	 (cond
	   ((= j+1 end-digit)
	    (format t "  cond: j = end-digit - 1: ~A ~A-1~%" j end-digit)
	    (format t "        pos-bits, end-bits ~A ~A~%" pos-bits end-bits)
	    (setf (%bignum-ref result j+1)
		  (cond
		    ((>= pos-bits end-bits)
		     (format t "   cond: pos-bits >= end-bits ~A ~A~%" pos-bits end-bits)
		     (format t "         res-digit = ~:,,,8X~%" (%bignum-ref result j+1))
		     (let* ((digit (%bignum-ref bignum-byte i))
			    (word
			     (logior (logandc2 (%bignum-ref result j+1)
					       (%make-ones end-bits))
				     (%digit-logical-shift-right digit bits-past-pos-bits))))
		       ;; Update previous word too
		       (setf (%bignum-ref result j)
			     (logior (logandc2 (%bignum-ref result j)
					       (%ashl high-mask pos-bits))
				     (%ashl (logand digit high-mask) pos-bits)))
		       (format t "         word      = ~:,,,8X~%" word)
		       word))
		    #+nil
		    ((< i bignum-len)
		     ;; We've reached the end of the result, but we
		     ;; haven't used all of the bignum-byte digits
		     ;; yet.  Do so now.
		     
		     (format t "   cond: i < bignum-len ~A ~A~%" i bignum-len)
		     (Format t "    j = ~A~%" j)
		     (format t "    bignum-byte = ~:,,,8X~%" bignum-byte)
		     (format t "    end-bits, pos-bits = ~A ~A~%" end-bits pos-bits)
		     (format t "    word = ~:,,,8X~%"
			     (%ashl (logand (%bignum-ref bignum-byte i)
					    (%make-ones (- end-bits pos-bits)))
				    pos-bits))
		     (format t "    res word = ~:,,,8X~%" (%bignum-ref result j))
		     (format t "    result = ~:,,,8X~%"
			     (ldb (byte (* 32 (%bignum-length result)) 0) result))
		     (let* ((mask (%make-ones (- end-bits pos-bits)))
			    (word
			     (logior (logandc2 (%bignum-ref result j+1)
					       (%make-ones end-bits))
				     (%digit-logical-shift-right (%bignum-ref bignum-byte i) bits-past-pos-bits))))
		       (format t "    new word = ~:,,,8X~%" word)
		       (format t "    result = ~:,,,8X~%"
			       (ldb (byte (* 32 (%bignum-length result)) 0) result))
		       ;; Adjust previous word too
		       (setf (%bignum-ref result j)
			     (logior (logandc2 (%bignum-ref result j)
					       (%ashl high-mask pos-bits))
				     (%ashl (logand (%bignum-ref bignum-byte i) high-mask) pos-bits)))
		       word)
		     )
		    ((< i bignum-len)
		     ;; We've reached the end of the result, but we
		     ;; haven't used all of the bignum-byte digits
		     ;; yet.  Do so now.
		     ;;
		     ;; For i to bignum-len - 1
		     ;;   merge bignum-byte[i] into result j, j+1
		     ;; merge bignum-byte[bignum-len - 1] into result 
		     
		     (format t "   cond: i < bignum-len ~A ~A~%" i bignum-len)
		     (Format t "    j = ~A~%" j)
		     (format t "    bignum-byte = ~:,,,8X~%" bignum-byte)
		     (format t "    end-bits, pos-bits = ~A ~A~%" end-bits pos-bits)
		     (do ((i i (1+ i))
			  (j j j+1)
			  (j+1 j+1 (1+ j+1)))
			 ((>= i (1- bignum-len))
			  (let* ((mask (%make-ones (- end-bits pos-bits)))
				 (word
				  (logior (logandc2 (%bignum-ref result j)
						    (%ashl mask pos-bits))
					  (%ashl (logand (%bignum-ref bignum-byte (1- bignum-len))
							 mask) pos-bits))
				   ))
			    (format t "       bignum-byte[~A] = ~:8,,,8x~%" (1- bignum-len)
				    (%bignum-ref bignum-byte (1- bignum-len)))
			    (format t "       result[~A] = ~:8,,,8X~%" j (%bignum-ref result j))
			    (format t "        end-bits, pos-bits = ~A ~A~%" end-bits pos-bits)
			    (format t "        res mask  = ~:8,,,8X~%" (%ashl (%make-ones end-bits) pos-bits))
			    (format t "        or in     = ~:8,,,8X~%" (%ashl (logand (%bignum-ref bignum-byte (1- bignum-len))
										      high-mask) pos-bits))
			    (format t "       Final result[~A] = ~:8,,,8x~%" j word)

			    word))
		       (let ((word 0)
			     (digit (%bignum-ref bignum-byte i)))
			 (format t "      i, j = ~A ~A~%" i j)
			 (format t "      digit = ~@8X~%" digit)
			 ;; Set the top bits of the current result digit with the low
			 ;; bits from the new-byte.
			 (setf word
			       (logior (logandc2 (%bignum-ref result j)
						 (%ashl high-mask pos-bits))
				       (%ashl (logand digit high-mask) pos-bits)))
			 (format t "       Set result[~A] = ~:8,,,8x~%" j word)
			 (setf (%bignum-ref result j) word)

		       
			 ;; Set the low bits of the next result digit with the high
			 ;; bits from the new-byte.
			 (setf word
			       (logior (logandc2 (%bignum-ref result j+1)
						 low-mask)
				       (%digit-logical-shift-right digit bits-past-pos-bits)))
			 (format t "       Set result[~A] = ~:8,,,8x~%" j+1 word)
			 (setf (%bignum-ref result j+1) word))))
		    (bignum-plusp
		     (format t "   cond: bignum-plusp~%")
		     (logand (%bignum-ref result j)
			     ;; 0's between pos-bits and end-bits positions.
			     (logior (%ashl (%make-ones (- digit-size end-bits))
					    end-bits)
				     low-mask)))
		    (t
		     (format t "   cond: T~%")
		     (logior (%bignum-ref result j)
			       (%ashl (%make-ones (- end-bits pos-bits))
				      pos-bits))))))
	  (bignum-plusp)
	  (t
	   (format t "  cond: T~%")
	   (setf (%bignum-ref result j)
		 (%ashl (%make-ones bits-past-pos-bits) pos-bits))
	   (do ((j j+1 (1+ j)))
	       ((= j end-digit)
		(setf (%bignum-ref result j) (%make-ones end-bits)))
	     (declare (type bignum-index j))
	     (setf (%bignum-ref result j) all-ones-digit)))))
      (declare (type bignum-index i j j+1))
      (let ((digit (%bignum-ref bignum-byte i))
	    (word 0))
	(declare (type bignum-element-type digit))
	;; Set the top bits of the current result digit with the low
	;; bits from the new-byte.
	(setf word
	      (logior (logandc2 (%bignum-ref result j)
				(%ashl high-mask pos-bits))
		      (%ashl (logand digit high-mask) pos-bits)))
	(format t "    Set ~A (~:,,,8x) to ~:,,,8x~%"
		j (%bignum-ref result j) word)
	(format t "     mask = ~:,,,8x~%" high-mask)
	(setf (%bignum-ref result j) word)

	(Format t "     bits-post-post-bits = ~A~%" bits-past-pos-bits)
	;; Set the low bits of the next result digit with the high
	;; bits from the new-byte.
	(setf word
	      #+nil
	      (logand (ash digit minus-high-bits)
		      ;; LOGAND should be unnecessary here with a logical right
		      ;; shift or a correct unsigned-byte-32 one.
		      low-mask)
	      (logior (logandc2 (%bignum-ref result j+1)
				low-mask)
		      (%digit-logical-shift-right digit bits-past-pos-bits)))
	(Format t "     low mask = ~x~%" low-mask)
	(format t "    Set next ~A (~:,,,8x) to ~:,,,8x~%"
		j+1 (%bignum-ref result j+1) word)
	(format t "    result[j+1]   = ~:,,,8x~%" (%bignum-ref result j+1))
	(format t "    shifted digit = ~:,,,8x~%" (%digit-logical-shift-right digit bits-past-pos-bits))

	(setf (%bignum-ref result j+1) word)))))

;;|#


;;;; TRUNCATE.

;;; This is the original sketch of the algorithm from which I implemented this
;;; TRUNCATE, assuming both operands are bignums.  I should modify this to work
;;; with the documentation on my functions, as a general introduction.  I've
;;; left this here just in case someone needs it in the future.  Don't look
;;; at this unless reading the functions' comments leaves you at a loss.
;;; Remember this comes from Knuth, so the book might give you the right general
;;; overview.
;;; 
;;;
;;; (truncate x y):
;;;
;;; If X's magnitude is less than Y's, then result is 0 with remainder X.
;;;
;;; Make x and y positive, copying x if it is already positive.
;;;
;;; Shift y left until there's a 1 in the 30'th bit (most significant, non-sign
;;;       digit)
;;;    Just do most sig digit to determine how much to shift whole number.
;;; Shift x this much too.
;;; Remember this initial shift count.
;;;
;;; Allocate q to be len-x minus len-y quantity plus 1.
;;;
;;; i = last digit of x.
;;; k = last digit of q.
;;;
;;; LOOP
;;;
;;; j = last digit of y.
;;;
;;; compute guess.
;;; if x[i] = y[j] then g = #xFFFFFFFF
;;; else g = x[i]x[i-1]/y[j].
;;;
;;; check guess.
;;; %UNSIGNED-MULTIPLY returns b and c defined below.
;;;    a = x[i-1] - (logand (* g y[j]) #xFFFFFFFF).
;;;       Use %UNSIGNED-MULTIPLY taking low-order result.
;;;    b = (logand (ash (* g y[j-1]) -32) #xFFFFFFFF).
;;;    c = (logand (* g y[j-1]) #xFFFFFFFF).
;;; if a < b, okay.
;;; if a > b, guess is too high
;;;    g = g - 1; go back to "check guess".
;;; if a = b and c > x[i-2], guess is too high
;;;    g = g - 1; go back to "check guess".
;;; GUESS IS 32-BIT NUMBER, SO USE THING TO KEEP IN SPECIAL REGISTER
;;; SAME FOR A, B, AND C.
;;;
;;; Subtract g * y from x[i - len-y+1]..x[i].  See paper for doing this in step.
;;; If x[i] < 0, guess is fucked.
;;;    negative g, then add 1
;;;    zero or positive g, then subtract 1
;;; AND add y back into x[len-y+1..i].
;;;
;;; q[k] = g.
;;; i = i - 1.
;;; k = k - 1.
;;;
;;; If k>=0, goto LOOP.
;;;
;;;
;;; Now quotient is good, but remainder is not.
;;; Shift x right by saved initial left shifting count.
;;;
;;; Check quotient and remainder signs.
;;; x pos y pos --> q pos r pos
;;; x pos y neg --> q neg r pos
;;; x neg y pos --> q neg r neg
;;; x neg y neg --> q pos r neg
;;;
;;; Normalize quotient and remainder.  Cons result if necessary.
;;;



;;; These are used by BIGNUM-TRUNCATE and friends in the general case.
;;;
(defvar *truncate-x*)
(defvar *truncate-y*)

;;; BIGNUM-TRUNCATE -- Public.
;;;
;;; This divides x by y returning the quotient and remainder.  In the general
;;; case, we shift y to setup for the algorithm, and we use two buffers to save
;;; consing intermediate values.  X gets destructively modified to become the
;;; remainder, and we have to shift it to account for the initial Y shift.
;;; After we multiple bind q and r, we first fix up the signs and then return
;;; the normalized results.
;;;
(defun bignum-truncate (x y)
  (declare (type bignum-type x y))
  (let* ((x-plusp (%bignum-0-or-plusp x (%bignum-length x)))
	 (y-plusp (%bignum-0-or-plusp y (%bignum-length y)))
	 (x (if x-plusp x (negate-bignum x nil)))
	 (y (if y-plusp y (negate-bignum y nil)))
	 (len-x (%bignum-length x))
	 (len-y (%bignum-length y)))
    (multiple-value-bind
	(q r)
	(cond ((< len-y 2)
	       (bignum-truncate-single-digit x len-x y))
	      ((plusp (bignum-compare y x))
	       (let ((res (%allocate-bignum len-x)))
		 (dotimes (i len-x)
		   (setf (%bignum-ref res i) (%bignum-ref x i)))
		 (values 0 res)))
	      (t
	       (let ((len-x+1 (1+ len-x)))
		 (with-bignum-buffers ((*truncate-x* len-x+1)
				       (*truncate-y* (1+ len-y)))
		   (let ((y-shift (shift-y-for-truncate y)))
		     (shift-and-store-truncate-buffers x len-x y len-y y-shift)
		     (values (do-truncate len-x+1 len-y)
			     ;; DO-TRUNCATE must execute first.
			     (cond
			      ((zerop y-shift)
			       (let ((res (%allocate-bignum len-y)))
				 (declare (type bignum-type res))
				 (bignum-replace res *truncate-x* :end2 len-y)
				 (%normalize-bignum res len-y)))
			      (t
			       (shift-right-unaligned
				*truncate-x* 0 y-shift len-y
				((= j res-len-1)
				 (setf (%bignum-ref res j)
				       (%ashr (%bignum-ref *truncate-x* i)
					      y-shift))
				 (%normalize-bignum res res-len))
				res)))))))))
      (let ((quotient (cond ((eq x-plusp y-plusp) q)
			    ((typep q 'fixnum) (the fixnum (- q)))
			    (t (negate-bignum-in-place q))))
	    (rem (cond (x-plusp r)
		       ((typep r 'fixnum) (the fixnum (- r)))
		       (t (negate-bignum-in-place r)))))
	(values (if (typep quotient 'fixnum)
		    quotient
		    (%normalize-bignum quotient (%bignum-length quotient)))
		(if (typep rem 'fixnum)
		    rem
		    (%normalize-bignum rem (%bignum-length rem))))))))

;;; BIGNUM-TRUNCATE-SINGLE-DIGIT -- Internal.
;;;
;;; This divides x by y when y is a single bignum digit.  BIGNUM-TRUNCATE fixes
;;; up the quotient and remainder with respect to sign and normalization.
;;;
;;; We don't have to worry about shifting y to make its most significant digit
;;; sufficiently large for %FLOOR to return 32-bit quantities for the q-digit
;;; and r-digit.  If y is a single digit bignum, it is already large enough
;;; for %FLOOR.  That is, it has some bits on pretty high in the digit.
;;;
(defun bignum-truncate-single-digit (x len-x y)
  (declare (type bignum-index len-x))
  (let ((q (%allocate-bignum len-x))
	(r 0)
	(y (%bignum-ref y 0)))
    (declare (type bignum-element-type r y))
    (do ((i (1- len-x) (1- i)))
	((minusp i))
      (multiple-value-bind (q-digit r-digit)
			   (%floor r (%bignum-ref x i) y)
	(declare (type bignum-element-type q-digit r-digit))
	(setf (%bignum-ref q i) q-digit)
	(setf r r-digit)))
    (let ((rem (%allocate-bignum 1)))
      (setf (%bignum-ref rem 0) r)
      (values q rem))))

;;; DO-TRUNCATE -- Internal.
;;;
;;; This divides *truncate-x* by *truncate-y*, and len-x and len-y tell us how
;;; much of the buffers we care about.  TRY-BIGNUM-TRUNCATE-GUESS modifies
;;; *truncate-x* on each interation, and this buffer becomes our remainder.
;;;
;;; *truncate-x* definitely has at least three digits, and it has one more than
;;; *truncate-y*.  This keeps i, i-1, i-2, and low-x-digit happy.  Thanks to
;;; SHIFT-AND-STORE-TRUNCATE-BUFFERS.
;;;
(defun do-truncate (len-x len-y)
  (declare (type bignum-index len-x len-y))
  (let* ((len-q (- len-x len-y))
	 ;; Add one for extra sign digit in case high bit is on.
	 (q (%allocate-bignum (1+ len-q)))
	 (k (1- len-q))
	 (y1 (%bignum-ref *truncate-y* (1- len-y)))
	 (y2 (%bignum-ref *truncate-y* (- len-y 2)))
	 (i (1- len-x))
	 (i-1 (1- i))
	 (i-2 (1- i-1))
	 (low-x-digit (- i len-y)))
    (declare (type bignum-index len-q k i i-1 i-2 low-x-digit)
	     (type bignum-element-type y1 y2))
    (loop
      (setf (%bignum-ref q k)
	    (try-bignum-truncate-guess
	     ;; This modifies *truncate-x*.  Must access elements each pass.
	     (bignum-truncate-guess y1 y2
				    (%bignum-ref *truncate-x* i)
				    (%bignum-ref *truncate-x* i-1)
				    (%bignum-ref *truncate-x* i-2))
	     len-y low-x-digit))
      (cond ((zerop k) (return))
	    (t (decf k)
	       (decf low-x-digit)
	       (shiftf i i-1 i-2 (1- i-2)))))
    q))

;;; TRY-BIGNUM-TRUNCATE-GUESS -- Internal.
;;;
;;; This takes a digit guess, multiplies it by *truncate-y* for a result one
;;; greater in length than len-y, and subtracts this result from *truncate-x*.
;;; Low-x-digit is the first digit of x to start the subtraction, and we know x
;;; is long enough to subtract a len-y plus one length bignum from it.  Next we
;;; check the result of the subtraction, and if the high digit in x became
;;; negative, then our guess was one too big.  In this case, return one less
;;; than guess passed in, and add one value of y back into x to account for
;;; subtracting one too many.  Knuth shows that the guess is wrong on the order
;;; of 3/b, where b is the base (2 to the digit-size power) -- pretty rarely.
;;;
(defun try-bignum-truncate-guess (guess len-y low-x-digit)
  (declare (type bignum-index low-x-digit len-y)
	   (type bignum-element-type guess))
  (let ((carry-digit 0)
	(borrow 1)
	(i low-x-digit))
    (declare (type bignum-element-type carry-digit)
	     (type bignum-index i)
	     (fixnum borrow))
    ;; Multiply guess and divisor, subtracting from dividend simultaneously.
    (dotimes (j len-y)
      (multiple-value-bind (high-digit low-digit)
			   (%multiply-and-add guess (%bignum-ref *truncate-y* j)
					      carry-digit)
	(declare (type bignum-element-type high-digit low-digit))
	(setf carry-digit high-digit)
	(multiple-value-bind (x temp-borrow)
			     (%subtract-with-borrow (%bignum-ref *truncate-x* i)
						    low-digit borrow)
	  (declare (type bignum-element-type x)
		   (fixnum temp-borrow))
	  (setf (%bignum-ref *truncate-x* i) x)
	  (setf borrow temp-borrow)))
      (incf i))
    (setf (%bignum-ref *truncate-x* i)
	  (%subtract-with-borrow (%bignum-ref *truncate-x* i)
				 carry-digit borrow))
    ;; See if guess is off by one, adding one Y back in if necessary.
    (cond ((%digit-0-or-plusp (%bignum-ref *truncate-x* i))
	   guess)
	  (t
	   ;; If subtraction has negative result, add one divisor value back
	   ;; in.  The guess was one too large in magnitude.
	   (let ((i low-x-digit)
		 (carry 0))
	     (dotimes (j len-y)
	       (multiple-value-bind (v k)
				    (%add-with-carry (%bignum-ref *truncate-y* j)
						     (%bignum-ref *truncate-x* i)
						     carry)
		 (declare (type bignum-element-type v))
		 (setf (%bignum-ref *truncate-x* i) v)
		 (setf carry k))
	       (incf i))
	     (setf (%bignum-ref *truncate-x* i)
		   (%add-with-carry (%bignum-ref *truncate-x* i) 0 carry)))
	   (%subtract-with-borrow guess 1 1)))))

;;; BIGNUM-TRUNCATE-GUESS -- Internal.
;;;
;;; This returns a guess for the next division step.  Y1 is the highest y
;;; digit, and y2 is the second to highest y digit.  The x... variables are
;;; the three highest x digits for the next division step.
;;;
;;; From Knuth, our guess is either all ones or x-i and x-i-1 divided by y1,
;;; depending on whether x-i and y1 are the same.  We test this guess by
;;; determining whether guess*y2 is greater than the three high digits of x
;;; minus guess*y1 shifted left one digit:
;;;    ------------------------------
;;;   |    x-i    |   x-i-1  | x-i-2 |
;;;    ------------------------------
;;;    ------------------------------
;;; - | g*y1 high | g*y1 low |   0   |
;;;    ------------------------------
;;;                ...                   <   guess*y2     ???
;;; If guess*y2 is greater, then we decrement our guess by one and try again.
;;; This returns a guess that is either correct or one too large.
;;;
(defun bignum-truncate-guess (y1 y2 x-i x-i-1 x-i-2)
  (declare (type bignum-element-type y1 y2 x-i x-i-1 x-i-2))
  (let ((guess (if (%digit-compare x-i y1)
		   all-ones-digit
		   (%floor x-i x-i-1 y1))))
    (declare (type bignum-element-type guess))
    (loop
      (multiple-value-bind (high-guess*y1 low-guess*y1)
			   (%multiply guess y1)
	(declare (type bignum-element-type low-guess*y1 high-guess*y1))
	(multiple-value-bind (high-guess*y2 low-guess*y2)
			     (%multiply guess y2)
	  (declare (type bignum-element-type high-guess*y2 low-guess*y2))
	  (multiple-value-bind (middle-digit borrow)
			       (%subtract-with-borrow x-i-1 low-guess*y1 1)
	    (declare (type bignum-element-type middle-digit)
		     (fixnum borrow))
	    ;; Supplying borrow of 1 means there was no borrow, and we know
	    ;; x-i-2 minus 0 requires no borrow.
	    (let ((high-digit (%subtract-with-borrow x-i high-guess*y1 borrow)))
	      (declare (type bignum-element-type high-digit))
	      (if (and (%digit-compare high-digit 0)
		       (or (%digit-greater high-guess*y2 middle-digit)
			   (and (%digit-compare middle-digit high-guess*y2)
				(%digit-greater low-guess*y2 x-i-2))))
		  (setf guess (%subtract-with-borrow guess 1 1))
		  (return guess)))))))))

;;; SHIFT-Y-FOR-TRUNCATE -- Internal.
;;;
;;; This returns the amount to shift y to place a one in the second highest
;;; bit.  Y must be positive.  If the last digit of y is zero, then y has a
;;; one in the previous digit's sign bit, so we know it will take one less
;;; than digit-size to get a one where we want.  Otherwise, we count how many
;;; right shifts it takes to get zero; subtracting this value from digit-size
;;; tells us how many high zeros there are which is one more than the shift
;;; amount sought.
;;;
;;; Note: This is exactly the same as one less than the integer-length of the
;;; last digit subtracted from the digit-size.
;;; 
;;; We shift y to make it sufficiently large that doing the 64-bit by 32-bit
;;; %FLOOR calls ensures the quotient and remainder fit in 32-bits.
;;;
(defun shift-y-for-truncate (y)
  (let* ((len (%bignum-length y))
	 (last (%bignum-ref y (1- len))))
    (declare (type bignum-index len)
	     (type bignum-element-type last))
    (- digit-size (integer-length last) 1)))

;;; SHIFT-AND-STORE-TRUNCATE-BUFFERS -- Internal.
;;;
;;; Stores two bignums into the truncation bignum buffers, shifting them on the
;;; way in.  This assumes x and y are positive and at least two in length, and
;;; it assumes *truncate-x* and *truncate-y* are one digit longer than x and y.
;;;
(defun shift-and-store-truncate-buffers (x len-x y len-y shift)
  (declare (type bignum-index len-x len-y)
	   (type (integer 0 (#.digit-size)) shift))
  (cond ((zerop shift)
	 (bignum-replace *truncate-x* x :end1 len-x)
	 (bignum-replace *truncate-y* y :end1 len-y))
	(t
	 (bignum-ashift-left-unaligned x 0 shift (1+ len-x) *truncate-x*)
	 (bignum-ashift-left-unaligned y 0 shift (1+ len-y) *truncate-y*))))



;;;; %FLOOR primitive for BIGNUM-TRUNCATE.

;;; When a machine leaves out a 64-bit by 32-bit divide instruction (that is,
;;; two bignum-digits divided by one), we have to roll our own (the hard way).
;;; Basically, we treat the operation as four 16-bit digits divided by two
;;; 16-bit digits.  This means we have duplicated most of the code above to do
;;; this nearly general 16-bit digit bignum divide, but we've unrolled loops
;;; and made use of other properties of this specific divide situation.
;;;


;;;
;;; %FLOOR for machines with a 32x32 divider.
;;;

(declaim (inline 32x16-subtract-with-borrow 32x16-add-with-carry
		 32x16-divide 32x16-multiply 32x16-multiply-split))

#+32x16-divide
(defconstant 32x16-base-1 #xFFFF)

;;; 32X16-SUBTRACT-WITH-BORROW -- Internal.	[optionally IN ASSEMBLER]
;;;
;;; This is similar to %SUBTRACT-WITH-BORROW.  It returns a 16-bit difference
;;; and a borrow.  Returning a 1 for the borrow means there was no borrow, and
;;; 0 means there was one.
;;;
#+32x16-divide
(defun 32x16-subtract-with-borrow (a b borrow)
  (declare (type (unsigned-byte 16) a b)
	   (type (integer 0 1) borrow))
  (let ((diff (+ (- a b) borrow 32x16-base-1)))
    (declare (type (unsigned-byte 17) diff))
    (values (logand diff #xFFFF)
	    (ash diff -16))))

;;; 32X16-ADD-WITH-CARRY -- Internal.		[optionally IN ASSEMBLER]
;;;
;;; This adds a and b, 16-bit quantities, with the carry k.  It returns a
;;; 16-bit sum and a second value, 0 or 1, indicating whether there was a
;;; carry.
;;;
#+32x16-divide
(defun 32x16-add-with-carry (a b k)
  (declare (type (unsigned-byte 16) a b)
	   (type (integer 0 1) k))
  (let ((res (the fixnum (+ a b k))))
    (declare (type (unsigned-byte 17) res))
    (if (zerop (the fixnum (logand #x10000 res)))
	(values res 0)
	(values (the (unsigned-byte 16) (logand #xFFFF res))
		1))))

;;; 32x16-DIVIDE  --  Internal		[IN ASSEMBLER]
;;;
;;; This is probably a 32-bit by 32-bit divide instruction.
;;;
#+32x16-divide
(defun 32x16-divide (a b c)
  (declare (type (unsigned-byte 16) a b c))
  (floor (the bignum-element-type
	      (logior (the bignum-element-type (ash a 16))
		      b))
	 c))

;;; 32X16-MULTIPLY -- Internal.		[optionally IN ASSEMBLER]
;;;
;;; This basically exists since we know the answer won't overflow
;;; bignum-element-type.  It's probably just a basic multiply instruction, but
;;; it can't cons an intermediate bignum.  The result goes in a non-descriptor
;;; register.
;;;
#+32x16-divide
(defun 32x16-multiply (a b)
  (declare (type (unsigned-byte 16) a b))
  (the bignum-element-type (* a b)))

;;; 32X16-MULTIPLY-SPLIT -- Internal.		[optionally IN ASSEMBLER]
;;;
;;; This multiplies a and b, 16-bit quantities, and returns the result as two
;;; 16-bit quantities, high and low.
;;;
#+32x16-divide
(defun 32x16-multiply-split (a b)
  (let ((res (32x16-multiply a b)))
    (declare (the bignum-element-type res))
    (values (the (unsigned-byte 16) (logand #xFFFF (ash res -16)))
	    (the (unsigned-byte 16) (logand #xFFFF res)))))



;;; The %FLOOR below uses this buffer the same way BIGNUM-TRUNCATE uses
;;; *truncate-x*.  There's no y buffer since we pass around the two 16-bit
;;; digits and use them slightly differently than the general truncation
;;; algorithm above.
;;;
#+32x16-divide
(defvar *32x16-truncate-x* (make-array 4 :element-type '(unsigned-byte 16)
				       :initial-element 0))

;;; %FLOOR -- Internal.		LEFT IMPLEMENTED AT LISP LEVEL
;;;
;;; This does the same thing as the %FLOOR above, but it does it at Lisp level
;;; when there is no 64x32-bit divide instruction on the machine.
;;;
;;; It implements the higher level tactics of BIGNUM-TRUNCATE, but it makes use
;;; of special situation provided, four 16-bit digits divided by two 16-bit
;;; digits.
;;;
#+32x16-divide
(defun %floor (a b c)
  (declare (type bignum-element-type a b c))
  ;;
  ;; Setup *32x16-truncate-x* buffer from a and b.
  (setf (aref *32x16-truncate-x* 0)
	(the (unsigned-byte 16) (logand #xFFFF b)))
  (setf (aref *32x16-truncate-x* 1)
	(the (unsigned-byte 16)
	     (logand #xFFFF
		     (the (unsigned-byte 16) (ash b -16)))))
  (setf (aref *32x16-truncate-x* 2)
	(the (unsigned-byte 16) (logand #xFFFF a)))
  (setf (aref *32x16-truncate-x* 3)
	(the (unsigned-byte 16)
	     (logand #xFFFF
		     (the (unsigned-byte 16) (ash a -16)))))
  ;;
  ;; From DO-TRUNCATE, but unroll the loop.
  (let* ((y1 (logand #xFFFF (ash c -16)))
	 (y2 (logand #xFFFF c))
	 (q (the bignum-element-type
		 (ash (32x16-try-bignum-truncate-guess
		       (32x16-truncate-guess y1 y2
					     (aref *32x16-truncate-x* 3)
					     (aref *32x16-truncate-x* 2)
					     (aref *32x16-truncate-x* 1))
		       y1 y2 1)
		      16))))
    (declare (type bignum-element-type q)
	     (type (unsigned-byte 16) y1 y2))
    (values (the bignum-element-type
		 (logior q
			 (the (unsigned-byte 16)
			      (32x16-try-bignum-truncate-guess
			       (32x16-truncate-guess
				y1 y2
				(aref *32x16-truncate-x* 2)
				(aref *32x16-truncate-x* 1)
				(aref *32x16-truncate-x* 0))
			       y1 y2 0))))
	    (the bignum-element-type
		 (logior (the bignum-element-type
			      (ash (aref *32x16-truncate-x* 1) 16))
			 (the (unsigned-byte 16)
			      (aref *32x16-truncate-x* 0)))))))

;;; 32X16-TRY-BIGNUM-TRUNCATE-GUESS  --  Internal.
;;;
;;; This is similar to TRY-BIGNUM-TRUNCATE-GUESS, but this unrolls the two
;;; loops.  This also substitutes for %DIGIT-0-OR-PLUSP the equivalent
;;; expression without any embellishment or pretense of abstraction.  The first
;;; loop is unrolled, but we've put the body of the loop into the function
;;; 32X16-TRY-GUESS-ONE-RESULT-DIGIT.
;;;
#+32x16-divide
(defun 32x16-try-bignum-truncate-guess (guess y-high y-low low-x-digit)
  (declare (type bignum-index low-x-digit)
	   (type (unsigned-byte 16) guess y-high y-low))
  (let ((high-x-digit (+ 2 low-x-digit)))
    ;;
    ;; Multiply guess and divisor, subtracting from dividend simultaneously.
    (multiple-value-bind
	(guess*y-hold carry borrow)
	(32x16-try-guess-one-result-digit guess y-low 0 0 1 low-x-digit)
      (declare (type (unsigned-byte 16) guess*y-hold)
	       (fixnum carry borrow))
      (multiple-value-bind
	  (guess*y-hold carry borrow)
	  (32x16-try-guess-one-result-digit guess y-high guess*y-hold
					    carry borrow (1+ low-x-digit))
	(declare (type (unsigned-byte 16) guess*y-hold)
		 (fixnum borrow)
		 (ignore carry))
	(setf (aref *32x16-truncate-x* high-x-digit)
	      (32x16-subtract-with-borrow (aref *32x16-truncate-x* high-x-digit)
					  guess*y-hold borrow))))
    ;;
    ;; See if guess is off by one, adding one Y back in if necessary.
    (cond ((zerop (logand #x8000 (aref *32x16-truncate-x* high-x-digit)))
	   ;; The subtraction result is zero or positive.
	   guess)
	  (t
	   ;; If subtraction has negative result, add one divisor value back in.
	   ;; The guess was one two large in magnitude.
	   (multiple-value-bind (v carry)
				(32x16-add-with-carry y-low
						      (aref *32x16-truncate-x*
							    low-x-digit)
						      0)
	     (declare (type (unsigned-byte 16) v))
	     (setf (aref *32x16-truncate-x* low-x-digit) v)
	     (multiple-value-bind (v carry)
				  (32x16-add-with-carry y-high
							(aref *32x16-truncate-x*
							      (1+ low-x-digit))
							carry)
	       (setf (aref *32x16-truncate-x* (1+ low-x-digit)) v)
	       (setf (aref *32x16-truncate-x* high-x-digit)
		     (32x16-add-with-carry (aref *32x16-truncate-x* high-x-digit)
					   carry 0))))
	   (if (zerop (logand #x8000 guess))
	       (1- guess)
	       (1+ guess))))))

;;; 32X16-TRY-GUESS-ONE-RESULT-DIGIT -- Internal.
;;;
;;; This is similar to the body of the loop in TRY-BIGNUM-TRUNCATE-GUESS that
;;; multiplies the guess by y and subtracts the result from x simultaneously.
;;; This returns the digit remembered as part of the multiplication, the carry
;;; from additions done on behalf of the multiplication, and the borrow from
;;; doing the subtraction.
;;;
#+32x16-divide
(defun 32x16-try-guess-one-result-digit (guess y-digit guess*y-hold
					 carry borrow x-index)
  (multiple-value-bind (high-digit low-digit)
		       (32x16-multiply-split guess y-digit)
    (declare (type (unsigned-byte 16) high-digit low-digit))
    (multiple-value-bind (low-digit temp-carry)
			 (32x16-add-with-carry low-digit guess*y-hold carry)
      (declare (type (unsigned-byte 16) low-digit))
      (multiple-value-bind (high-digit temp-carry)
			   (32x16-add-with-carry high-digit temp-carry 0)
	(declare (type (unsigned-byte 16) high-digit))
	(multiple-value-bind (x temp-borrow)
			     (32x16-subtract-with-borrow
			      (aref *32x16-truncate-x* x-index)
			      low-digit borrow)
	  (declare (type (unsigned-byte 16) x))
	  (setf (aref *32x16-truncate-x* x-index) x)
	  (values high-digit temp-carry temp-borrow))))))

;;; 32X16-TRUNCATE-GUESS -- Internal.
;;;
;;; This is similar to BIGNUM-TRUNCATE-GUESS, but instead of computing the
;;; guess exactly as described in the its comments (digit by digit), this
;;; massages the 16-bit quantities into 32-bit quantities and performs the
;;; 
#+32x16-divide
(defun 32x16-truncate-guess (y1 y2 x-i x-i-1 x-i-2)
  (declare (type (unsigned-byte 16) y1 y2 x-i x-i-1 x-i-2))
  (let ((guess (if (= x-i y1)
		   #xFFFF
		   (32x16-divide x-i x-i-1 y1))))
    (declare (type (unsigned-byte 16) guess))
    (loop
      (let* ((guess*y1 (the bignum-element-type
			    (ash (logand #xFFFF
					 (the bignum-element-type
					      (32x16-multiply guess y1)))
				 16)))
	     (x-y (%subtract-with-borrow
		   (the bignum-element-type
			(logior (the bignum-element-type
				     (ash x-i-1 16))
				x-i-2))
		   guess*y1
		   1))
	     (guess*y2 (the bignum-element-type (%multiply guess y2))))
	(declare (type bignum-element-type guess*y1 x-y guess*y2))
	(if (%digit-greater guess*y2 x-y)
	    (decf guess)
	    (return guess))))))


;;;; General utilities.

;;; %NORMALIZE-BIGNUM-BUFFER -- Internal.
;;;
;;; Internal in-place operations use this to fixup remaining digits in the
;;; incoming data, such as in-place shifting.  This is basically the same as
;;; the first form in %NORMALIZE-BIGNUM, but we return the length of the buffer
;;; instead of shrinking the bignum.
;;;
#+nil(declaim (ext:maybe-inline %normalize-bignum-buffer))
(defun %normalize-bignum-buffer (result len)
  (declare (type bignum-type result)
	   (type bignum-index len))
  (unless (= len 1)
    (do ((next-digit (%bignum-ref result (- len 2))
		     (%bignum-ref result (- len 2)))
	 (sign-digit (%bignum-ref result (1- len)) next-digit))
	((not (zerop (logxor sign-digit (%ashr next-digit (1- digit-size))))))
	(decf len)
	(setf (%bignum-ref result len) 0)	
	(when (= len 1)
	      (return))))
  len)

;;; %NORMALIZE-BIGNUM -- Internal.
;;;
;;; This drops the last digit if it is unnecessary sign information.  It
;;; repeats this as needed, possibly ending with a fixnum.  If the resulting
;;; length from shrinking is one, see if our one word is a fixnum.  Shift the
;;; possible fixnum bits completely out of the word, and compare this with
;;; shifting the sign bit all the way through.  If the bits are all 1's or 0's
;;; in both words, then there are just sign bits between the fixnum bits and
;;; the sign bit.  If we do have a fixnum, shift it over for the two low-tag
;;; bits.
;;;
(defun %normalize-bignum (result len)
  (declare (type bignum-type result)
	   (type bignum-index len)
	   #+nil(inline %normalize-bignum-buffer))
  (let ((newlen (%normalize-bignum-buffer result len)))
    (declare (type bignum-index newlen))
    (unless (= newlen len)
      (%bignum-set-length result newlen))
    (if (= newlen 1)
	(let ((digit (%bignum-ref result 0)))
	  (if (= (%ashr digit #+amd64 61 #-amd64 29) (%ashr digit (1- digit-size)))
	      (%fixnum-digit-with-correct-sign digit)
	      result))
	result)))

;;; %MOSTLY-NORMALIZE-BIGNUM -- Internal.
;;;
;;; This drops the last digit if it is unnecessary sign information.  It
;;; repeats this as needed, possibly ending with a fixnum magnitude but never
;;; returning a fixnum.
;;;
(defun %mostly-normalize-bignum (result len)
  (declare (type bignum-type result)
	   (type bignum-index len)
	   #+nil(inline %normalize-bignum-buffer))
  (let ((newlen (%normalize-bignum-buffer result len)))
    (declare (type bignum-index newlen))
    (unless (= newlen len)
      (%bignum-set-length result newlen))
    result))