run-tests.sh 20.7 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
#!/bin/sh

# run-tests {lisp invocation} {scripts-regex}
# - read lisp forms one at a time from standard input
# - quit with exit status 0 on getting eof
# - quit with exit status >0 if an unhandled error occurs

usage () {
    echo "$0 [lisp invocation] [scripts-regex]"
    echo " - read lisp forms one at a time from matching scripts"
    echo " - quit with exit status 0 on getting eof"
    echo " - quit with exit status >0 if an unhandled error occurs"
    echo " you need to supply the .script in the second argument"
    echo " lisps include abcl, ccl (clozure),"
    echo "    allegro, allegro8, allegromodern, allegromodern8,"
    echo "    allegro_s, allegro8_s, allegromodern_s, allegromodern8_s (SMP variants)"
    echo "    allegro_64, allegro8_64, allegromodern_64, allegromodern8_64 (64-bit variants),"
    echo "    allegro_64_s, allegro8_64_s, allegromodern_64_s, allegromodern8_64_s, (SMP, 64-bit variants)"
19
    echo "    clasp, clisp, cmucl, ecl, gcl, sbcl, scl and xcl."
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158
    echo " To configure the script, you may set environment variables to point to the various lisp runtimes."
    echo " Allegro CL is a special case: instead of setting environment variables for the specific runtime"
    echo "   locations, you may simply specify the Allegro install directories using these variables:"
    echo "     ALLEGRO64DIR, ALLEGRO64SDIR (64-bit Allegro and SMP Allegro, respectively), ALLEGRODIR, and"
    echo "     ALLEGROSDIR."
    echo "OPTIONS:"
    echo "    -c -- clean load test."
    echo "    -d -- debug mode."
    echo "    -t -- test interactively."
    echo "    -h -- show this message."
    echo "    -u -- upgrade tests."
    echo "    -l -- load systems tests."
    echo "    -H -- extract all asdf versions to upgrade from."
    echo "    -u -- upgrade tests, we already told you."
}

unset DEBUG_ASDF_TEST upgrade clean_load load_systems test_interactively extract_all

SHELL=/bin/sh
export SHELL DEBUG_ASDF_TEST GCL_ANSI ASDF_OUTPUT_TRANSLATIONS

if [ -n "$ALLEGRO64DIR" ] ; then
    ALLEGRO_64=${ALLEGRO64DIR}/alisp
    ALLEGRO8_64=${ALLEGRO64DIR}/alisp8
    ALLEGROMODERN_64=${ALLEGRO64DIR}/mlisp
    ALLEGROMODERN8_64=${ALLEGRO64DIR}/mlisp8
fi
if [ -n "$ALLEGRO64SDIR" ] ; then
    ALLEGRO_64_S=${ALLEGRO64SDIR}/alisp
    ALLEGRO8_64_S=${ALLEGRO64SDIR}/alisp8
    ALLEGROMODERN_64_S=${ALLEGRO64SDIR}/mlisp
    ALLEGROMODERN8_64_S=${ALLEGRO64SDIR}/mlisp8
fi
if [ -n "$ALLEGRODIR" ] ; then
    ALLEGRO=${ALLEGRODIR}/alisp
    ALLEGRO8=${ALLEGRODIR}/alisp8
    ALLEGROMODERN=${ALLEGRODIR}/mlisp
    ALLEGROMODERN8=${ALLEGRODIR}/mlisp8
fi
if [ -n "$ALLEGROSDIR" ] ; then
    ALLEGRO_S=${ALLEGROSDIR}/alisp
    ALLEGRO8_S=${ALLEGROSDIR}/alisp8
    ALLEGROMODERN_S=${ALLEGROSDIR}/mlisp
    ALLEGROMODERN8_S=${ALLEGROSDIR}/mlisp8
fi


while getopts "cdtHulhu" OPTION
do
    case $OPTION in
        c)
            clean_load=t
            ;;
        d)
            DEBUG_ASDF_TEST=t
            ;;
        t)
            test_interactively=t
            ;;
        h)
            usage
            exit 1
            ;;
        u)
            upgrade=t
            ;;
        l)
            load_systems=t
            ;;
        H)
            extract_all=t
            ;;
    esac
done
shift $(($OPTIND - 1))

if [ x"$1" = "xhelp" ]; then
    usage
    exit 1
fi
lisp=${1:-sbcl} ; shift


ECHO () { printf '%s\n' "$*" ;}
ECHOn () { printf '%s' "$*" ;}
DBG () { ECHO "$*" >& 2 ;}
simple_term_p () {
  case "$1" in *[!a-zA-Z0-9-+_,.:=%/]*) return 1 ;; *) return 0 ;; esac
}
kwote0 () { ECHOn "$1" | sed -e "s/\([\\\\\"\$\`]\)/\\\\\\1/g" ;}
kwote1 () { if simple_term_p "$1" ; then ECHOn "$1"
  else ECHOn "\"$(kwote0 "$1")\"" ; fi ;}
kwote () { ( set +x
  k="" ; for i ; do ECHOn "$k" ; kwote1 "$i" ; k=" " ; done ; echo
) }
DO () { kwote "$@" ; "$@" ; }

do_tests () {
  if [ -z "$*" ]; then
       scripts="*.script"
  else
       scripts="$*"
  fi
  env | grep -i asdf
  ## We go through great lengths to avoid " in the command line,
  ## the quoting of which many Windows implementations get wrong.
  ## While we're at it, we also avoid spaces and backslashes.
  ( DO $bcmd $eval '(or`,#.(load(string`|script-support.lisp|))#.(asdf-test::compile-asdf-script))' )
  if [ $? -ne 0 ] ; then
    echo "Compilation FAILED" >&2
    echo "you can retry compilation with:" >&2
    echo ./test/run-tests.sh $lisp >&2
    echo "or more interactively (and maybe with rlwrap or in emacs), start with:" >&2
    echo "$icmd" >&2
    echo "then copy/paste:" >&2
    echo '(load "test/script-support.lisp") (asdf-test::compile-asdf-script)' >&2
  else
    echo "Compiled OK" >&2
    test_count=0
    test_pass=0
    test_fail=0
    failed_list=""
    for i in $scripts ;
    do
      echo "Testing: $i" >&2
      test_count=`expr "$test_count" + 1`
      rm -f ~/.cache/common-lisp/"`pwd`"/* || true
      if DO $bcmd $eval "'(#.(load(string'|script-support.lisp|))#.(asdf-test::load-asdf)#.(asdf-test::frob-packages)#.(asdf-test:run-test-script'|$i|))" ; then
        echo "Using $command, $i passed" >&2
	test_pass=`expr "$test_pass" + 1`
      else
        echo "Using $command, $i failed" >&2
	test_fail=`expr "$test_fail" + 1`
	failed_list="$failed_list $i"
        echo "you can retry compilation with:" >&2
        echo ./test/run-tests.sh $lisp $i >&2
        echo "or more interactively (and maybe with rlwrap or in emacs), start with:" >&2
        echo "(cd test ; $icmd )" >&2
        echo "then copy/paste:" >&2
159
        echo "'(#.(load \"script-support.lisp\") #.(asdf-test::da) #.(load-asdf) #.(frob-packages) #.(load \"$i\"))" >&2
160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183
      fi
      echo >&2
      echo >&2
    done
    echo >&2
    echo "-#---------------------------------------" >&2
    echo "Using $command" >&2
    echo "Ran $test_count tests: " >&2
    echo "  $test_pass passing and $test_fail failing" >&2
    if [ $test_fail -eq 0 ] ; then
	echo "all tests apparently successful" >&2
        echo success > ../build/results/status
    else
	echo "failing test(s): $failed_list" >&2
    fi
    echo "-#---------------------------------------" >&2
    echo >&2
  fi
}

#
# not used currently but leave here for future reference.
#
case $(uname) in
184 185 186
    CYGWIN*|MSYS_NT*) os=windows ;;
    Darwin*) os=macos ;;
    Linux*) os=linux ;;
187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225
    *) os=unknown ;;
esac



# terminate on error
set -e

command= flags= nodebug= eval= bcmd= icmd=
case "$lisp" in
  abcl)
    command="${ABCL:-abcl}"
    flags="--noinit --nosystem --noinform"
    eval="--eval"
    ;;
  allegro*)
    case "$lisp" in
      allegro) command="${ALLEGRO:-alisp}" ;;
      allegro8) command="${ALLEGRO8:-alisp8}" ;;
      allegromodern) command="${ALLEGROMODERN:-mlisp}" ;;
      allegromodern8) command="${ALLEGROMODERN8:-mlisp8}" ;;
      allegro_s) command="${ALLEGRO_S:-alisp_s}" ;;
      allegro8_s) command="${ALLEGRO8_S:-alisp8_s}" ;;
      allegromodern_s) command="${ALLEGROMODERN_S:-mlisp_s}" ;;
      allegromodern8_s) command="${ALLEGROMODERN8_S:-mlisp8_s}" ;;
      allegro_64) command="${ALLEGRO_64:-alisp_64}" ;;
      allegro8_64) command="${ALLEGRO8_64:-alisp8_64}" ;;
      allegromodern_64) command="${ALLEGROMODERN_64:-mlisp_64}" ;;
      allegromodern8_64) command="${ALLEGROMODERN8_64:-mlisp8_64}" ;;
      allegro_64_s) command="${ALLEGRO_64_S:-alisp_64_s}" ;;
      allegro8_64_s) command="${ALLEGRO8_64_S:-alisp8_64_s}" ;;
      allegromodern_64_s) command="${ALLEGROMODERN_64_S:-mlisp_64_s}" ;;
      allegromodern8_64_s) command="${ALLEGROMODERN8_64_S:-mlisp8_64_s}" ;;
    esac
    # For the sake of the lisp-invocation library, re-export these
    # ALLEGRO=$command ; export ALLEGRO ;
    # echo ALLEGRO=$ALLEGRO
    flags="-q"
    nodebug="-batch"
226
    if [ "$os" = windows ] ; then
227
        adir=$(dirname "${command}") ;
228
        allegroName=$(basename "${command}" ".exe") ;
229 230 231 232 233 234
        if [[ ${allegroName: -1} == "8" ]] ; then build=build ; else build=buildi ; fi ;
        # this takes somewhat unjustifiable advantage of the fact that
        # the Allegro images have the same name (with .dxl extension)
        # as the corresponding executables.  the "build" executable
        # runs an ACL image in the current terminal instead of a
        # separate window, as is normal on Windows.
235
        bcmd="${adir}/${build}.exe -I ${adir}/${allegroName}.dxl $flags" ;
236 237 238 239 240 241 242 243 244
    fi
    eval="-e" ;;
  ccl)
    command="${CCL:-ccl}"
    flags="--no-init --quiet"
    nodebug="--batch"
    eval="--eval" ;;
  clasp)
    command="${CLASP:-clasp}"
245 246
    flags="--norc --noinit"
    eval="--eval" ;;
247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286
  clisp)
    command="${CLISP:-clisp}"
    flags="-norc --silent -ansi -I "
    nodebug="-on-error exit"
    eval="-x" ;;
  cmucl)
    # cmucl likes to have its executable called lisp, but so does scl
    # Please use a symlink or an exec ... "$@" trampoline script.
    command="${CMUCL:-cmucl}"
    flags="-noinit"
    nodebug="-batch"
    eval="-eval" ;;
  ecl)
    command="${ECL:-ecl}"
    flags="-norc -load sys:cmp"
    eval="-eval" ;;
  ecl_bytecodes)
    command="${ECL:-ecl}"
    flags="-norc -eval (ext::install-bytecodes-compiler)"
    eval="-eval" ;;
  gcl)
    GCL_ANSI=t
    command="${GCL:-gcl}"
    flags=""
    nodebug="-batch"
    eval="-eval" ;;
  lispworks)
    command="${LISPWORKS:-lispworks-console}"
    # If you have a licensed copy of lispworks,
    # you can obtain the "lispworks" binary with, e.g.
    # echo '(hcl:save-image "/lispworks" :environment nil)' > /tmp/build.lisp ;
    # ./lispworks-6-0-0-x86-linux -siteinit - -init - -build /tmp/build.lisp
    flags="-siteinit - -init -"
    eval="-eval" ;;
  mkcl)
    command="${MKCL:-mkcl}"
    flags="-norc"
    eval="-eval" ;;
  sbcl)
    command="${SBCL:-sbcl}"
287 288
    flags="--no-userinit --no-sysinit"
    # flags="--noinform --no-userinit --no-sysinit"
289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310
    nodebug="--disable-debugger"
    eval="--eval" ;;
  scl)
    command="${SCL:-scl}"
    flags="-noinit"
    nodebug="-batch"
    eval="-eval" ;;
  xcl)
    command="${XCL:-xcl}"
    flags="--no-userinit --no-siteinit --noinform"
    eval="--eval" ;;
  *)
    echo "Unsupported lisp: $1" >&2
    echo "Please add support to run-tests.sh" >&2
    exit 42 ;;
esac

if ! type "$command" > /dev/null ; then
    echo "lisp implementation not found: $command" >&2
    exit 43
fi

311
ASDFDIR="$(cd $(dirname $0)/.. ; command pwd)"
312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359
: ${bcmd:=$command $flags} ${icmd:=$command $flags} # batch and interactive
if [ -z "${DEBUG_ASDF_TEST}" ] ; then
  bcmd="$bcmd $nodebug"
fi


create_config () {
    cd ${ASDFDIR}
    mkdir -p build/results/ build/test-source-registry-conf.d build/test-asdf-output-translations-conf.d
}
upgrade_tags () {
    if [ -n "$ASDF_UPGRADE_TEST_TAGS" ] ; then
        echo $ASDF_UPGRADE_TEST_TAGS ; return
    fi
    # REQUIRE is a magic tag meaning whatever your implementation provides, if anything
    #
    # 1.85 (2004-05-16) is the last release by Daniel Barlow (not 1.37, which is the README revision!)
    # 1.97 (2006-05-14) is the last release before Gary King takes over
    # 1.369 (2009-10-27) is the last release by Gary King
    #
    # 2.000 to 2.019 and 2.20 to 2.26 are Faré's "stable" ASDF 2 releases
    #   2.000 (2010-05-31) was the first ASDF 2 release
    #   2.008 (2010-09-10) was a somewhat stable ASDF 2 release
    #   2.011 (2010-11-28) was used by CLISP 2.49, Debian squeeze, Ubuntu 10.04 LTS
    #   2.014.6 (2011-04-06) was used by Quicklisp in 2011
    #   2.019 (2011-11-27) was stable and used by LispWorks since 2012.
    #   2.20 (2012-01-18) was in CCL 1.8, Ubuntu 12.04 LTS
    #   2.22 (2012-06-12) was used by debian wheezy
    #   2.26 (2012-10-30) was used by Quicklisp in 2013
    #
    # 2.26.x is where the refactoring that begat ASDF 3 took place.
    # 2.26.61 is the last single-file, single-package ASDF.
    # 2.27 to 2.33 are Faré's "stable" ASDF 3 pre-releases
    #   2.27 (2013-02-01) is the first ASDF 3 pre-release
    #   2.32 (2013-03-05) is the first really stable ASDF 3 pre-release
    #
    # The 3.0 series is a stable release of ASDF 3
    # with Robert Goldman taking over maintainership at 3.0.2.
    # 3.0.0 was just 2.33.10 promoted, but version-satisfies meant it was suddenly
    # not compatible with ASDF2 anymore, so we immediately released 3.0.1
    #   3.0.1 (2013-05-16) is the first stable ASDF 3 release
    #   3.0.2 (2013-07-02) is the first ASDF 3 in SBCL
    #   3.0.3 (2013-10-22) is the last in the ASDF 3.0 series
    #
    # The 3.1 series provides the 3.1 feature, meaning users can rely on
    # all the stabilization work done in 3.0 so far, plus extra developments
    # in UIOP, package-inferred-system, and more robustification.
    #   3.1.2 (2014-05-06) is the first ASDF 3.1 release
360 361 362 363 364 365 366 367 368
    #   3.1.3 (2014-07-24) a bug fix release for 3.1.2
    #   3.1.4 (2014-10-09) more bug fixes, source-registry cache, in LispWorks 7
    #   3.1.5 (2015-07-21) more bug fixes, what SBCL sports (as of 1.3.14, 2017-02-04)
    #   3.1.6 (2015-10-17) more bug fixes
    #   3.1.7 (2016-03-23) more bug fixes, last in 3.1 series
    #
    # The 3.2 series provides the asdf3.2 feature, meaning users can rely on
    # all its new features (launch-program, improved bundle support), as well as
    # the improvements done in 3.1 (e.g. XDG support).
369 370 371 372 373 374 375
    #   3.2.0 (2017-01-08) first in 3.2 series
    #   3.2.1 (2017-04-03) bug fixes, second and last in 3.2 series
    #
    # The 3.3 series provides the asdf3.3 feature, meaning users can rely on
    # all its new features (proper phase separation) as well as earlier features.
    #   3.3.0 (2017-10-06) first in 3.3 series
    #   3.3.1 (2017-11-14) bug fixes, second and latest in 3.3 series
376 377 378
    #
    # We return the above designated versions in order of decreasing relevance,
    # which pretty much means REQUIRE and most recent first.
379 380
    # We picked the last and first in each relevant series, plus 2.26.
    echo REQUIRE 3.3.1 3.3.0 3.2.1 3.2.0 3.1.7 3.1.2 3.0.3 2.26
381 382 383 384 385 386

    #echo 3.1.7 3.1.6 3.1.5 3.1.4 3.1.3 3.1.2
    #echo 3.0.3 3.0.2 3.0.1
    #echo 2.32 2.27
    #echo 2.26 2.22 2.20 2.019 2.014.6 2.011 2.008 2.000
    #echo 1.369 1.97 1.85
387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410
}
upgrade_methods () {
    if [ -n "$ASDF_UPGRADE_TEST_METHODS" ] ; then
        echo $ASDF_UPGRADE_TEST_METHODS ; return
    fi
    cat <<EOF
'load-asdf-lisp'load-asdf-lisp-clean
'load-asdf-lisp'load-asdf-system
'load-asdf-lisp'compile-load-asdf-upgrade
'load-asdf-lisp'load-asdf-fasl
()'load-asdf-fasl
'load-asdf-lisp-and-test-uiop'load-asdf-fasl
EOF
}
extract_tagged_asdf () {
    cd ${ASDFDIR}
    mkdir -p build/
    tag=$1
    if [ REQUIRE = "$tag" ] ; then return 0 ; fi
    file=build/asdf-${tag}.lisp ;
    if [ ! -f $file ] ; then
        case $tag in
            1.*|2.0*|2.2[0-6]|2.26.61)
                git show ${tag}:asdf.lisp > $file ;;
411
            2.2[7-9]*|2.[3-9][0-9]*|3.*)
412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434
                mkdir -p build/old/build
                git archive ${tag} | (cd build/old/ ; tar xf -)
                make -C build/old
                mv build/old/build/asdf.lisp build/asdf-${tag}.lisp
                rm -rf build/old ;;
             *)
                echo "Don't know how to extract asdf.lisp for version $tag"
                exit 55
                ;;
        esac
    fi
}
extract_all_tagged_asdf () {
    for i in `upgrade_tags` ; do
      extract_tagged_asdf $i
    done
}
valid_upgrade_test_p () {
    case "${1}:${2}:${3}" in
        # It's damn slow. Also, for some reason, we punt on anything earlier than 2.25,
        # and only need to test it once, below for 2.24.
        abcl:1.*|abcl:2.00[0-9]:*|abcl:201[0-9]:*|abcl:2.2[0-3]:*) : ;;
        # ccl fasl numbering broke loading of old asdf 2.0
435
        ccl:2.0[01]*|ccl:2.2[0-6]*) : ;;
436 437 438
        # Allegro ships with versions 3*, so give up testing 2
        # Also, unpatched Allegro 10 has bug updating from 2.26 and before
        allegro*:[12].*) : ;;
439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525
        # My old ubuntu 10.04LTS clisp 2.44.1 came wired in
        # with an antique ASDF 1.374 from CLC that can't be downgraded.
        # More recent CLISPs work.
        # 2.00[0-7] use UID, which fails on some old CLISPs.
        # Note that for the longest time, CLISP has included 2.011 in its distribution.
        # Now its hg repository includes 3.0.2.29, but clisp hasn't released in many years(!)
        # We don't punt on upgrade anymore, so we can go at it!
        #clisp:2.00[0-7]:*|clisp:1.*|clisp:2.0[01]*|clisp:2.2[0-5]:*) : ;;
        # CMUCL has problems with 2.32 and earlier because of
        # the redefinition of system's superclass component.
        cmucl:1.*|cmucl:2.[012]*|cmucl:2.3[012]*) : ;;
        # Skip many ECL tests, for various ASDF issues
        ecl*:1.*|ecl*:2.0[01]*|ecl*:2.20:*) : ;;
        # GCL 2.7.0 from late November 2013 is required, with ASDF 3.1.2
        gcl:REQUIRE:*|gcl:1.*|gcl:2.*|gcl:3.0*) : ;;
        # LispWorks is broken at ASDF 3.0.3, but can upgrade from earlier and later ASDFs.
        lispworks:3.0.3:*) : ;;
        # MKCL is only supported starting with specific versions 2.24, 2.26.x, 3.0.3.0.x, so skip.
        mkcl:[12]*|mkcl:3.0*) : ;;
        # XCL support starts with ASDF 2.014.2
        # — It also dies during upgrade trying to show the backtrace.
        xcl:1.*|xcl:2.00*|xcl:2.01[0-4]:*|xcl:*) : ;;
        *) return 0 ;;
   esac
   return 1
}
run_upgrade_tests () {
    cd ${ASDFDIR}
    mkdir -p build/results/
    rm -f build/*.*f* uiop/*.*f* test/*.*f* ## Remove stale FASLs from ASDF 1.x, especially when different implementations have same name
    ASDF_OUTPUT_TRANSLATIONS="(:output-translations (\"${ASDFDIR}\" (\"${ASDFDIR}/build/fasls/\" :implementation \"asdf/\")) (t (\"${ASDFDIR}/build/fasls/\" :implementation \"root/\")) :ignore-inherited-configuration)"
    su=test/script-support.lisp
    tags="`upgrade_tags`"
    methods="`upgrade_methods`"
    {
    for tag in $tags ; do
        for method in $methods ; do
            if valid_upgrade_test_p $lisp $tag $method ; then
                echo "Testing ASDF upgrade from ${tag} using method $method"
                extract_tagged_asdf $tag
                $bcmd $eval \
                "'(#.(load(string'|$su|))#.#.\`(in-package,:asdf-test)#.(test-upgrade$method\`|$tag|))" ||
                { echo "upgrade FAILED for $lisp from $tag using method $method" ;
                  echo "you can retry just that test with:" ;
                  echo ASDF_UPGRADE_TEST_TAGS=\"$tag\" ASDF_UPGRADE_TEST_METHODS=\"$method\" ./test/run-tests.sh -u $lisp ;
                  echo "or more interactively (and maybe with rlwrap or in emacs), start with:"
                  echo "$icmd"
                  echo "then copy/paste:"
                  echo "(load \"$su\") (asdf-test::da) (test-upgrade $method \"$tag\")"
                  exit 1 ;}
    fi ; done ; done
    echo "Upgrade test succeeded for ${lisp}"
    } 2>&1 | tee build/results/${lisp}-upgrade.text
}
run_tests () {
  create_config
  cd ./test/
  echo failure > ../build/results/status
    thedate=`date "+%Y-%m-%d"`
    rm -f "../build/results/${lisp}-test.text" || :
    do_tests "$@" 2>&1 | \
	tee "../build/results/${lisp}-test.text" "../build/results/${lisp}-test-${thedate}.save"
    read a < ../build/results/status
  clean_up
  if [ success = "$a" ] ; then ## exit code
      return 0
  else
     echo "To view full results and failures, try the following command:" >&2
     echo "     less -p ABORTED build/results/${lisp}-test.text" >&2
     return 1
  fi
}
clean_up () {
    rm -rf ../build/test-source-registry-conf.d ../build/test-asdf-output-translations-conf.d
}
test_clean_load () {
    case $lisp in
        gcl|cmucl) return 0 ;; # These are hopeless
    esac
    cd ${ASDFDIR}
    mkdir -p build/results/
    nop=build/results/${lisp}-nop.text
    load=build/results/${lisp}-load.text
    $bcmd $eval \
      "(or'#.(load(string'|test/script-support.lisp|):verbose():print())#.(asdf-test:exit-lisp'0))" \
      > $nop 2>&1
    $bcmd $eval \
526
      "(or'#.(load(string'|test/script-support.lisp|):verbose():print())#.(asdf-test:verbose())#.(load(string'|build/asdf.lisp|):verbose())#.(uiop/image:quit'0))" \
527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562
      > $load 2>&1
    if diff $nop $load ; then
      echo "GOOD: Loading ASDF on $lisp produces no message" >&2 ; return 0
    else
      echo "BAD: Loading ASDF on $lisp produces messages" >&2 ; return 1
    fi
}
test_load_systems () {
    cd ${ASDFDIR}
    mkdir -p build/results/
    echo "Loading all these systems: $*"
    $bcmd $eval \
      "(or #.(load(string'|test/script-support.lisp|))#.(asdf-test:with-test()(asdf-test:test-load-systems $*)))" \
        2>&1 | tee build/results/${lisp}-systems.text
}
test_interactively () {
    cd ${ASDFDIR}
    mkdir -p build/results/
    rlwrap $icmd $eval "(or'#.(load(string'|test/script-support.lisp|))#.(asdf-test:interactive-test'($*)))"
}

if [ -z "$command" ] ; then
    echo "Error: cannot find or do not know how to run Lisp named $lisp"
elif [ -n "$test_interactively" ] ; then
    test_interactively "$@"
elif [ -n "$clean_load" ] ; then
    test_clean_load
elif [ -n "$load_systems" ] ; then
    test_load_systems "$@"
elif [ -n "$upgrade" ] ; then
    run_upgrade_tests
elif [ -n "$extract_all" ] ; then
    extract_all_tagged_asdf
else
    run_tests "$@"
fi ; exit # NB: "; exit" makes it robust wrt the script being modified while running.