Newer
Older
;;; -*- Package: UNIX -*-
;;;
;;; **********************************************************************
;;; This code was written as part of the CMU Common Lisp project at
;;; Carnegie Mellon University, and has been placed in the public domain.
;;;
(ext:file-comment
"$Header: /Volumes/share2/src/cmucl/cvs2git/cvsroot/src/code/unix.lisp,v 1.46 1997/05/17 16:54:30 pw Exp $")
;;;
;;; **********************************************************************
;;;
;;; This file contains the UNIX low-level support.
;;;
(in-package "UNIX")
(use-package "ALIEN")
(use-package "C-CALL")
(use-package "SYSTEM")
(use-package "EXT")
(export '(
daddr-t caddr-t ino-t swblk-t size-t time-t dev-t off-t uid-t gid-t
timeval tv-sec tv-usec timezone tz-minuteswest tz-dsttime
itimerval it-interval it-value tchars t-intrc t-quitc t-startc
t-stopc t-eofc t-brkc ltchars t-suspc t-dsuspc t-rprntc t-flushc
t-werasc t-lnextc sgttyb sg-ispeed sg-ospeed sg-erase sg-kill
sg-flags winsize ws-row ws-col ws-xpixel ws-ypixel
direct d-off d-ino d-reclen #-(or linux svr4) d-namlen d-name
stat st-dev st-mode st-nlink st-uid st-gid st-rdev st-size
st-atime st-mtime st-ctime st-blksize st-blocks
s-ifmt s-ifdir s-ifchr s-ifblk s-ifreg s-iflnk s-ifsock
s-isuid s-isgid s-isvtx s-iread s-iwrite s-iexec
ruseage ru-utime ru-stime ru-maxrss ru-ixrss ru-idrss
ru-isrss ru-minflt ru-majflt ru-nswap ru-inblock ru-oublock
ru-msgsnd ru-msgrcv ru-nsignals ru-nvcsw ru-nivcsw
unix-errno get-unix-error-msg
unix-pathname unix-file-mode unix-fd unix-pid unix-uid unix-gid
unix-access r_ok w_ok x_ok f_ok unix-chdir unix-chmod setuidexec
setgidexec savetext readown writeown execown readgrp writegrp
execgrp readoth writeoth execoth unix-fchmod unix-chown unix-fchown
unix-getdtablesize unix-close unix-creat unix-dup unix-dup2
unix-fcntl f-dupfd f-getfd f-setfd f-getfl f-setfl f-getown f-setown
fndelay fappend fasync fcreat ftrunc fexcl unix-link unix-lseek
l_set l_incr l_xtnd unix-mkdir unix-open o_rdonly o_wronly o_rdwr
o_append o_creat o_trunc o_excl unix-pipe unix-read unix-readlink
unix-rename unix-rmdir unix-fast-select fd-setsize fd-set fd-clr
fd-isset fd-zero unix-select unix-sync unix-fsync unix-truncate
tcsetpgrp tcgetpgrp tty-process-group
terminal-speeds tty-raw tty-crmod tty-echo tty-lcase
#-(or hpux svr4 freebsd) tty-cbreak #-(or hpux svr4) tty-tandem
#+(or hpux svr4 linux freebsd) termios #+(or hpux svr4 freebsd) c-lflag
#+(or hpux svr4 freebsd) c-iflag #+(or hpux svr4 freebsd) c-oflag
#+(or hpux svr4 freebsd) tty-icrnl #+(or hpux svr4 freebsd) tty-ocrnl
#+(or hpux svr4 freebsd) vdsusp #+(or hpux svr4 freebsd) veof
#+(or hpux svr4 freebsd) vintr #+(or hpux svr4 freebsd) vquit #+(or hpux svr4 freebsd) vstart
#+(or hpux svr4 freebsd) vstop #+(or hpux svr4 freebsd) vsusp
#+(or hpux svr4 freebsd) c-cflag
#+(or hpux svr4 freebsd) c-cc #+(or hpux svr4 freebsd) tty-icanon
#+(or hpux svr4 freebsd) vmin #+(or hpux svr4 freebsd) vtime
#+(or hpux svr4 freebsd) tty-ixon
#+(or hpux svr4 freebsd) tcsaflush #+(or hpux svr4 linux freebsd)
unix-tcgetattr #+(or hpux svr4 linux freebsd) unix-tcsetattr
TIOCGETP TIOCSETP TIOCFLUSH TIOCSETC TIOCGETC TIOCSLTC
unix-exit unix-stat unix-lstat unix-fstat
unix-getrusage unix-fast-getrusage rusage_self rusage_children
unix-gettimeofday
#-hpux unix-utimes #-(or svr4 hpux) unix-setreuid
#-(or svr4 hpux) unix-setregid
unix-getpid unix-getppid
unix-getgid unix-getegid unix-getpgrp unix-setpgrp unix-getuid
unix-getpagesize unix-gethostname unix-gethostid unix-fork
unix-current-directory unix-isatty unix-ttyname unix-execve
unix-socket unix-connect unix-bind unix-listen unix-accept
unix-recv unix-send))
(pushnew :unix *features*)
;;;; Common machine independent structures.
#+bsd
(def-alien-type quad-t (array unsigned-long 2))
(def-alien-type daddr-t #-(or linux alpha) long #+(or linux alpha) int)
(def-alien-type ino-t #-alpha unsigned-long #+alpha unsigned-int)
(def-alien-type size-t #-(or linux alpha) long #+linux unsigned-int
#+alpha unsigned-long)
(def-alien-type time-t #-(or linux alpha) unsigned-long #+linux long
#+alpha unsigned-int)
(def-alien-type dev-t #-(or alpha svr4 bsd linux) short #+linux unsigned-short
#+alpha int #+(and (not linux) (or bsd svr4)) unsigned-long)
#-FreeBSD
(def-alien-type off-t #-alpha long #+alpha unsigned-long)
#+FreeBSD
(def-alien-type off-t quad-t)
#-FreeBSD
(def-alien-type uid-t #-(or alpha svr4) unsigned-short #+alpha unsigned-int
#+svr4 long)
#+FreeBSD
(def-alien-type uid-t unsigned-long)
#-FreeBSD
(def-alien-type gid-t #-(or alpha svr4) unsigned-short #+alpha unsigned-int
#+svr4 long)
(def-alien-type mode-t #-(or alpha svr4) unsigned-short
(def-alien-type nlink-t #-svr4 unsigned-short #+svr4 unsigned-long)
(defconstant FD-SETSIZE #-(or hpux alpha linux) 256 #+hpux 2048 #+alpha 4096 #+linux 1024)
(fds-bits (array #-alpha unsigned-long #+alpha int #.(/ fd-setsize 32)))))
(setf (deref (slot ,fd-set 'fds-bits) ,word)
(logior (truly-the (unsigned-byte 32) (ash 1 ,bit))
(deref (slot ,fd-set 'fds-bits) ,word))))))
(setf (deref (slot ,fd-set 'fds-bits) ,word)
(logand (deref (slot ,fd-set 'fds-bits) ,word)
(32bit-logical-not
(truly-the (unsigned-byte 32) (ash 1 ,bit))))))))
(defmacro fd-isset (offset fd-set)
(let ((word (gensym))
(bit (gensym)))
`(multiple-value-bind (,word ,bit) (floor ,offset 32)
(logbitp ,bit (deref (slot ,fd-set 'fds-bits) ,word)))))
`(progn
,@(loop for index upfrom 0 below (/ fd-setsize 32)
collect `(setf (deref (slot ,fd-set 'fds-bits) ,index) 0))))
;;; From sys/time.h
(def-alien-type nil
(struct timeval
(tv-sec #-linux time-t #+linux int) ; seconds
(tv-usec #-linux time-t #+linux int))) ; and microseconds
(def-alien-type nil
(struct timezone
(tz-minuteswest int) ; minutes west of Greenwich
(tz-dsttime ; type of dst correction
#-linux (enum nil :none :usa :aust :wet :met :eet :can)
#+linux int)))
(def-alien-type nil
(struct itimerval
(it-interval (struct timeval)) ; timer interval
(it-value (struct timeval)))) ; current value
; High-res time. Actually posix definition under svr4 name.
(def-alien-type nil
(struct timestruc-t
(tv-sec time-t)
(tv-nsec long)))
#+(or linux FreeBSD)
(def-alien-type nil
(struct timespec-t
(ts-sec long)
(ts-nsec long)))
(def-alien-type nil
(struct tchars
(t-intrc char) ; interrupt
(t-quitc char) ; quit
(t-startc char) ; start output
(t-stopc char) ; stop output
(t-suspc char) ; stop process signal
(t-dsuspc char) ; delayed stop process signal
(t-rprntc char) ; reprint line
(t-flushc char) ; flush output (toggles)
#+linux (sg-flags #+mach short #-mach int) ; mode flags
(sg-ispeed char) ; input speed.
(sg-ospeed char) ; output speed
(sg-erase char) ; erase character
#-linux (sg-kill char) ; kill character
#-linux (sg-flags #+mach short #-mach int) ; mode flags
#+linux (sg-kill char)
#+linux (t (struct termios))
#+linux (check int)))
(def-alien-type nil
(struct winsize
(ws-row unsigned-short) ; rows, in characters
(ws-col unsigned-short) ; columns, in characters
(ws-xpixel unsigned-short) ; horizontal size, pixels
(ws-ypixel unsigned-short))) ; veritical size, pixels
;;; NOTE: There is both a termio (SYSV) and termios (POSIX)
;;; structure with similar but incompatible definitions. It may be that
;;; the non-BSD variant of termios below is really a termio but I (pw)
;;; can't verify. The BSD variant uses the Posix termios def. Some systems
;;; (Ultrix and OSF1) seem to support both if used independently.
;;; The 17f version of this seems a bit confused wrt the conditionals.
;;; Please check these defs for your system.
#+(or hpux irix linux solaris) ; SVR4??
(progn
(defconstant +NCC+
#+hpux 16
#+irix 23
#+(or lunux solaris) 19
"Size of control character vector.")
(struct termios ; <<< as in 17f -- may really be termio.
(c-iflag unsigned-int)
(c-oflag unsigned-int)
(c-cflag unsigned-int)
(c-lflag unsigned-int)
#+(or linux hpux)
(c-reserved #-linux unsigned-int #+linux unsigned-char)
(c-cc (array unsigned-char #.+NCC+))))
)
;;; From sys/termios.h
#+(or BSD OSF1)
(progn
(defconstant +NCCS+ 20 "Size of control character vector.")
(def-alien-type nil
(struct termios
(c-iflag unsigned-int)
(c-oflag unsigned-int)
(c-cflag unsigned-int)
(c-lflag unsigned-int)
(c-cc (array unsigned-char #.+NCCS+))
(c-ispeed unsigned-int)
(c-ospeed unsigned-int)
) ; ngorp
#+(and sunos (not svr4)) (d-off long) ; offset of next disk directory entry
(d-namlen unsigned-short) ; length of string in d-name
(d-name (array char 256)))) ; name must be no longer than this
#+bsd
(def-alien-type nil
(struct direct
(d-fileno unsigned-long)
(d-reclen unsigned-short)
(d-type unsigned-char)
(d-namlen unsigned-char) ; length of string in d-name
(d-name (array char 256)))) ; name must be no longer than this
#-(or svr4 alpha freebsd linux)
(def-alien-type nil
(struct stat
(st-dev dev-t)
(st-ino ino-t)
(st-uid uid-t)
(st-gid gid-t)
(st-rdev dev-t)
(st-size off-t)
(st-atime time-t)
(st-spare1 int)
(st-mtime time-t)
(st-spare2 int)
(st-ctime time-t)
(st-spare3 int)
(st-blksize #-alpha long #+alpha unsigned-int)
(st-blocks #-alpha long #+alpha int)
(def-alien-type nil
(struct stat
(st-dev dev-t)
(st-ino ino-t)
(st-atime (struct timespec-t))
(st-mtime (struct timespec-t))
(st-ctime (struct timespec-t))
(st-size unsigned-long) ; really quad
(st-sizeh unsigned-long) ;
(st-blocks unsigned-long) ; really quad
(st-blocksh unsigned-long)
(st-blksize unsigned-long)
(st-flags unsigned-long)
(st-gen unsigned-long)
(st-lspare long)
(st-qspare (array long 4)))) ; 2 quads
#+(or linux svr4)
(def-alien-type nil
(struct stat
(st-dev dev-t)
(st-pad1 #-linux (array long 3) #+linux unsigned-short)
(st-ino ino-t)
(st-mode #-linux unsigned-long #+linux unsigned-short)
(st-nlink #-linux short #+linux unsigned-short)
(st-uid #-linux uid-t #+linux unsigned-short)
(st-gid #-linux gid-t #+linux unsigned-short)
(st-rdev dev-t)
(st-pad2 #-linux (array long 2) #+linux unsigned-short)
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
#-linux (st-pad3 long)
#+linux (st-blksize unsigned-long)
#+linux (st-blocks unsigned-long)
#-linux (st-atime (struct timestruc-t))
#+linux (st-atime unsigned-long)
#+linux (unused-1 unsigned-long)
#-linux (st-mtime (struct timestruc-t))
#+linux (st-mtime unsigned-long)
#+linux (unused-2 unsigned-long)
#-linux (st-ctime (struct timestruc-t))
#+linux (st-ctime unsigned-long)
#+linux (unused-3 unsigned-long)
#+linux (unused-4 unsigned-long)
#+linux (unused-5 unsigned-long)
#-linux(st-blksize long)
#-linux (st-blocks long)
#-linux (st-fstype (array char 16))
#-linux (st-pad4 (array long 8))))
(defconstant s-ifmt #o0170000)
(defconstant s-ifdir #o0040000)
(defconstant s-ifchr #o0020000)
#+linux (defconstant s-ififo #x0010000)
(defconstant s-ifblk #o0060000)
(defconstant s-ifreg #o0100000)
(defconstant s-iflnk #o0120000)
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
(defconstant s-ifsock #o0140000)
(defconstant s-isuid #o0004000)
(defconstant s-isgid #o0002000)
(defconstant s-isvtx #o0001000)
(defconstant s-iread #o0000400)
(defconstant s-iwrite #o0000200)
(defconstant s-iexec #o0000100)
;;; From sys/resource.h
(def-alien-type nil
(struct rusage
(ru-utime (struct timeval)) ; user time used
(ru-stime (struct timeval)) ; system time used.
(ru-maxrss long)
(ru-ixrss long) ; integral sharded memory size
(ru-idrss long) ; integral unsharded data "
(ru-isrss long) ; integral unsharded stack "
(ru-minflt long) ; page reclaims
(ru-majflt long) ; page faults
(ru-nswap long) ; swaps
(ru-inblock long) ; block input operations
(ru-oublock long) ; block output operations
(ru-msgsnd long) ; messages sent
(ru-msgrcv long) ; messages received
(ru-nsignals long) ; signals received
(ru-nvcsw long) ; voluntary context switches
(ru-nivcsw long))) ; involuntary "
(def-alien-type nil
(struct rlimit
(rlim-cur #-(or linux alpha) int #+linux long #+alpha unsigned-int) ; current (soft) limit
(rlim-max #-(or linux alpha) int #+linux long #+alpha unsigned-int))); maximum value for rlim-cur
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
;;;; Errno stuff.
(eval-when (compile eval)
(defparameter *compiler-unix-errors* nil)
(defmacro def-unix-error (name number description)
`(progn
(eval-when (compile eval)
(push (cons ,number ,description) *compiler-unix-errors*))
(defconstant ,name ,number ,description)
(export ',name)))
(defmacro emit-unix-errors ()
(let* ((max (apply #'max (mapcar #'car *compiler-unix-errors*)))
(array (make-array (1+ max) :initial-element nil)))
(dolist (error *compiler-unix-errors*)
(setf (svref array (car error)) (cdr error)))
`(progn
(defvar *unix-errors* ',array)
(proclaim '(simple-vector *unix-errors*)))))
) ;eval-when
;;;
;;; From <errno.h>
;;;
(def-unix-error ESUCCESS 0 "Successful")
(def-unix-error EPERM 1 #-linux "Not owner" #+linux "Operation not permitted")
(def-unix-error ENOENT 2 "No such file or directory")
(def-unix-error ESRCH 3 "No such process")
(def-unix-error EINTR 4 "Interrupted system call")
(def-unix-error EIO 5 "I/O error")
(def-unix-error ENXIO 6 "No such device or address")
(def-unix-error E2BIG 7 "Arg list too long")
(def-unix-error ENOEXEC 8 "Exec format error")
(def-unix-error EBADF 9 "Bad file number")
(def-unix-error ECHILD 10 "No children")
(def-unix-error EAGAIN 11 #-linux "No more processes" #+linux "Try again")
(def-unix-error ENOMEM 12 #-linux "Not enough core" #+linux "Out of memory")
(def-unix-error EACCES 13 "Permission denied")
(def-unix-error EFAULT 14 "Bad address")
(def-unix-error ENOTBLK 15 "Block device required")
(def-unix-error EBUSY 16 #-linux "Mount device busy" #+linux "Device or resource busy")
(def-unix-error EEXIST 17 "File exists")
(def-unix-error EXDEV 18 "Cross-device link")
(def-unix-error ENODEV 19 "No such device")
(def-unix-error ENOTDIR 20 "Not a director")
(def-unix-error EISDIR 21 "Is a directory")
(def-unix-error EINVAL 22 "Invalid argument")
(def-unix-error ENFILE 23 "File table overflow")
(def-unix-error EMFILE 24 "Too many open files")
(def-unix-error ENOTTY 25 "Not a typewriter")
(def-unix-error ETXTBSY 26 "Text file busy")
(def-unix-error EFBIG 27 "File too large")
(def-unix-error ENOSPC 28 "No space left on device")
(def-unix-error ESPIPE 29 "Illegal seek")
(def-unix-error EROFS 30 "Read-only file system")
(def-unix-error EMLINK 31 "Too many links")
(def-unix-error EPIPE 32 "Broken pipe")
;;;
;;; Math
(def-unix-error EDOM 33 #-linux "Argument too large" #+linux "Math argument out of domain")
(def-unix-error ERANGE 34 #-linux "Result too large" #+linux "Math result not representable")
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
;;; non-blocking and interrupt i/o
(def-unix-error EWOULDBLOCK 35 "Operation would block")
(def-unix-error EDEADLK 35 "Operation would block") ; Ditto
(def-unix-error EINPROGRESS 36 "Operation now in progress")
(def-unix-error EALREADY 37 "Operation already in progress")
;;;
;;; ipc/network software
(def-unix-error ENOTSOCK 38 "Socket operation on non-socket")
(def-unix-error EDESTADDRREQ 39 "Destination address required")
(def-unix-error EMSGSIZE 40 "Message too long")
(def-unix-error EPROTOTYPE 41 "Protocol wrong type for socket")
(def-unix-error ENOPROTOOPT 42 "Protocol not available")
(def-unix-error EPROTONOSUPPORT 43 "Protocol not supported")
(def-unix-error ESOCKTNOSUPPORT 44 "Socket type not supported")
(def-unix-error EOPNOTSUPP 45 "Operation not supported on socket")
(def-unix-error EPFNOSUPPORT 46 "Protocol family not supported")
(def-unix-error EAFNOSUPPORT 47 "Address family not supported by protocol family")
(def-unix-error EADDRINUSE 48 "Address already in use")
(def-unix-error EADDRNOTAVAIL 49 "Can't assign requested address")
;;;
;;; operational errors
(def-unix-error ENETDOWN 50 "Network is down")
(def-unix-error ENETUNREACH 51 "Network is unreachable")
(def-unix-error ENETRESET 52 "Network dropped connection on reset")
(def-unix-error ECONNABORTED 53 "Software caused connection abort")
(def-unix-error ECONNRESET 54 "Connection reset by peer")
(def-unix-error ENOBUFS 55 "No buffer space available")
(def-unix-error EISCONN 56 "Socket is already connected")
(def-unix-error ENOTCONN 57 "Socket is not connected")
(def-unix-error ESHUTDOWN 58 "Can't send after socket shutdown")
(def-unix-error ETOOMANYREFS 59 "Too many references: can't splice")
(def-unix-error ETIMEDOUT 60 "Connection timed out")
(def-unix-error ECONNREFUSED 61 "Connection refused")
;;;
(def-unix-error ELOOP 62 "Too many levels of symbolic links")
(def-unix-error ENAMETOOLONG 63 "File name too long")
;;;
(def-unix-error EHOSTDOWN 64 "Host is down")
(def-unix-error EHOSTUNREACH 65 "No route to host")
(def-unix-error ENOTEMPTY 66 "Directory not empty")
;;;
;;; quotas & resource
(def-unix-error EPROCLIM 67 "Too many processes")
(def-unix-error EUSERS 68 "Too many users")
(def-unix-error EDQUOT 69 "Disc quota exceeded")
;;;
;;; CMU RFS
(def-unix-error ELOCAL 126 "namei should continue locally")
(def-unix-error EREMOTE 127 "namei was handled remotely")
;;;
;;; VICE
(def-unix-error EVICEERR 70 "Remote file system error ")
(def-unix-error EVICEOP 71 "syscall was handled by Vice")
;;;
;;; Mach Emulation
(def-unix-error ERESTART 72 "Mach Emulation Error (?)")
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
)
#+svr4
(progn
(def-unix-error ENOMSG 35 "No message of desired type")
(def-unix-error EIDRM 36 "Identifier removed")
(def-unix-error ECHRNG 37 "Channel number out of range")
(def-unix-error EL2NSYNC 38 "Level 2 not synchronized")
(def-unix-error EL3HLT 39 "Level 3 halted")
(def-unix-error EL3RST 40 "Level 3 reset")
(def-unix-error ELNRNG 41 "Link number out of range")
(def-unix-error EUNATCH 42 "Protocol driver not attached")
(def-unix-error ENOCSI 43 "No CSI structure available")
(def-unix-error EL2HLT 44 "Level 2 halted")
(def-unix-error EDEADLK 45 "Deadlock situation detected/avoided")
(def-unix-error ENOLCK 46 "No record locks available")
(def-unix-error ECANCELED 47 "Error 47")
(def-unix-error ENOTSUP 48 "Error 48")
(def-unix-error EBADE 50 "Bad exchange descriptor")
(def-unix-error EBADR 51 "Bad request descriptor")
(def-unix-error EXFULL 52 "Message tables full")
(def-unix-error ENOANO 53 "Anode table overflow")
(def-unix-error EBADRQC 54 "Bad request code")
(def-unix-error EBADSLT 55 "Invalid slot")
(def-unix-error EDEADLOCK 56 "File locking deadlock")
(def-unix-error EBFONT 57 "Bad font file format")
(def-unix-error ENOSTR 60 "Not a stream device")
(def-unix-error ENODATA 61 "No data available")
(def-unix-error ETIME 62 "Timer expired")
(def-unix-error ENOSR 63 "Out of stream resources")
(def-unix-error ENONET 64 "Machine is not on the network")
(def-unix-error ENOPKG 65 "Package not installed")
(def-unix-error EREMOTE 66 "Object is remote")
(def-unix-error ENOLINK 67 "Link has been severed")
(def-unix-error EADV 68 "Advertise error")
(def-unix-error ESRMNT 69 "Srmount error")
(def-unix-error ECOMM 70 "Communication error on send")
(def-unix-error EPROTO 71 "Protocol error")
(def-unix-error EMULTIHOP 74 "Multihop attempted")
(def-unix-error EBADMSG 77 "Not a data message")
(def-unix-error ENAMETOOLONG 78 "File name too long")
(def-unix-error EOVERFLOW 79 "Value too large for defined data type")
(def-unix-error ENOTUNIQ 80 "Name not unique on network")
(def-unix-error EBADFD 81 "File descriptor in bad state")
(def-unix-error EREMCHG 82 "Remote address changed")
(def-unix-error ELIBACC 83 "Can not access a needed shared library")
(def-unix-error ELIBBAD 84 "Accessing a corrupted shared library")
(def-unix-error ELIBSCN 85 ".lib section in a.out corrupted")
(def-unix-error ELIBMAX 86 "Attempting to link in more shared libraries than system limit")
(def-unix-error ELIBEXEC 87 "Can not exec a shared library directly")
(def-unix-error EILSEQ 88 "Error 88")
(def-unix-error ENOSYS 89 "Operation not applicable")
(def-unix-error ELOOP 90 "Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS")
(def-unix-error ERESTART 91 "Error 91")
(def-unix-error ESTRPIPE 92 "Error 92")
(def-unix-error ENOTEMPTY 93 "Directory not empty")
(def-unix-error EUSERS 94 "Too many users")
(def-unix-error ENOTSOCK 95 "Socket operation on non-socket")
(def-unix-error EDESTADDRREQ 96 "Destination address required")
(def-unix-error EMSGSIZE 97 "Message too long")
(def-unix-error EPROTOTYPE 98 "Protocol wrong type for socket")
(def-unix-error ENOPROTOOPT 99 "Option not supported by protocol")
(def-unix-error EPROTONOSUPPORT 120 "Protocol not supported")
(def-unix-error ESOCKTNOSUPPORT 121 "Socket type not supported")
(def-unix-error EOPNOTSUPP 122 "Operation not supported on transport endpoint")
(def-unix-error EPFNOSUPPORT 123 "Protocol family not supported")
(def-unix-error EAFNOSUPPORT 124 "Address family not supported by protocol family")
(def-unix-error EADDRINUSE 125 "Address already in use")
(def-unix-error EADDRNOTAVAIL 126 "Cannot assign requested address")
(def-unix-error ENETDOWN 127 "Network is down")
(def-unix-error ENETUNREACH 128 "Network is unreachable")
(def-unix-error ENETRESET 129 "Network dropped connection because of reset")
(def-unix-error ECONNABORTED 130 "Software caused connection abort")
(def-unix-error ECONNRESET 131 "Connection reset by peer")
(def-unix-error ENOBUFS 132 "No buffer space available")
(def-unix-error EISCONN 133 "Transport endpoint is already connected")
(def-unix-error ENOTCONN 134 "Transport endpoint is not connected")
(def-unix-error ESHUTDOWN 143 "Cannot send after socket shutdown")
(def-unix-error ETOOMANYREFS 144 "Too many references: cannot splice")
(def-unix-error ETIMEDOUT 145 "Connection timed out")
(def-unix-error ECONNREFUSED 146 "Connection refused")
(def-unix-error EHOSTDOWN 147 "Host is down")
(def-unix-error EHOSTUNREACH 148 "No route to host")
(def-unix-error EWOULDBLOCK 11 "Resource temporarily unavailable")
(def-unix-error EALREADY 149 "Operation already in progress")
(def-unix-error EINPROGRESS 150 "Operation now in progress")
(def-unix-error ESTALE 151 "Stale NFS file handle")
)
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
#+linux
(progn
(def-unix-error EDEADLK 35 "Resource deadlock would occur")
(def-unix-error ENAMETOOLONG 36 "File name too long")
(def-unix-error ENOLCK 37 "No record locks available")
(def-unix-error ENOSYS 38 "Function not implemented")
(def-unix-error ENOTEMPTY 39 "Directory not empty")
(def-unix-error ELOOP 40 "Too many symbolic links encountered")
(def-unix-error EWOULDBLOCK 11 "Operation would block")
(def-unix-error ENOMSG 42 "No message of desired type")
(def-unix-error EIDRM 43 "Identifier removed")
(def-unix-error ECHRNG 44 "Channel number out of range")
(def-unix-error EL2NSYNC 45 "Level 2 not synchronized")
(def-unix-error EL3HLT 46 "Level 3 halted")
(def-unix-error EL3RST 47 "Level 3 reset")
(def-unix-error ELNRNG 48 "Link number out of range")
(def-unix-error EUNATCH 49 "Protocol driver not attached")
(def-unix-error ENOCSI 50 "No CSI structure available")
(def-unix-error EL2HLT 51 "Level 2 halted")
(def-unix-error EBADE 52 "Invalid exchange")
(def-unix-error EBADR 53 "Invalid request descriptor")
(def-unix-error EXFULL 54 "Exchange full")
(def-unix-error ENOANO 55 "No anode")
(def-unix-error EBADRQC 56 "Invalid request code")
(def-unix-error EBADSLT 57 "Invalid slot")
(def-unix-error EDEADLOCK EDEADLK "File locking deadlock error")
(def-unix-error EBFONT 59 "Bad font file format")
(def-unix-error ENOSTR 60 "Device not a stream")
(def-unix-error ENODATA 61 "No data available")
(def-unix-error ETIME 62 "Timer expired")
(def-unix-error ENOSR 63 "Out of streams resources")
(def-unix-error ENONET 64 "Machine is not on the network")
(def-unix-error ENOPKG 65 "Package not installed")
(def-unix-error EREMOTE 66 "Object is remote")
(def-unix-error ENOLINK 67 "Link has been severed")
(def-unix-error EADV 68 "Advertise error")
(def-unix-error ESRMNT 69 "Srmount error")
(def-unix-error ECOMM 70 "Communication error on send")
(def-unix-error EPROTO 71 "Protocol error")
(def-unix-error EMULTIHOP 72 "Multihop attempted")
(def-unix-error EDOTDOT 73 "RFS specific error")
(def-unix-error EBADMSG 74 "Not a data message")
(def-unix-error EOVERFLOW 75 "Value too large for defined data type")
(def-unix-error ENOTUNIQ 76 "Name not unique on network")
(def-unix-error EBADFD 77 "File descriptor in bad state")
(def-unix-error EREMCHG 78 "Remote address changed")
(def-unix-error ELIBACC 79 "Can not access a needed shared library")
(def-unix-error ELIBBAD 80 "Accessing a corrupted shared library")
(def-unix-error ELIBSCN 81 ".lib section in a.out corrupted")
(def-unix-error ELIBMAX 82 "Attempting to link in too many shared libraries")
(def-unix-error ELIBEXEC 83 "Cannot exec a shared library directly")
(def-unix-error EILSEQ 84 "Illegal byte sequence")
(def-unix-error ERESTART 85 "Interrupted system call should be restarted ")
(def-unix-error ESTRPIPE 86 "Streams pipe error")
(def-unix-error EUSERS 87 "Too many users")
(def-unix-error ENOTSOCK 88 "Socket operation on non-socket")
(def-unix-error EDESTADDRREQ 89 "Destination address required")
(def-unix-error EMSGSIZE 90 "Message too long")
(def-unix-error EPROTOTYPE 91 "Protocol wrong type for socket")
(def-unix-error ENOPROTOOPT 92 "Protocol not available")
(def-unix-error EPROTONOSUPPORT 93 "Protocol not supported")
(def-unix-error ESOCKTNOSUPPORT 94 "Socket type not supported")
(def-unix-error EOPNOTSUPP 95 "Operation not supported on transport endpoint")
(def-unix-error EPFNOSUPPORT 96 "Protocol family not supported")
(def-unix-error EAFNOSUPPORT 97 "Address family not supported by protocol")
(def-unix-error EADDRINUSE 98 "Address already in use")
(def-unix-error EADDRNOTAVAIL 99 "Cannot assign requested address")
(def-unix-error ENETDOWN 100 "Network is down")
(def-unix-error ENETUNREACH 101 "Network is unreachable")
(def-unix-error ENETRESET 102 "Network dropped connection because of reset")
(def-unix-error ECONNABORTED 103 "Software caused connection abort")
(def-unix-error ECONNRESET 104 "Connection reset by peer")
(def-unix-error ENOBUFS 105 "No buffer space available")
(def-unix-error EISCONN 106 "Transport endpoint is already connected")
(def-unix-error ENOTCONN 107 "Transport endpoint is not connected")
(def-unix-error ESHUTDOWN 108 "Cannot send after transport endpoint shutdown")
(def-unix-error ETOOMANYREFS 109 "Too many references: cannot splice")
(def-unix-error ETIMEDOUT 110 "Connection timed out")
(def-unix-error ECONNREFUSED 111 "Connection refused")
(def-unix-error EHOSTDOWN 112 "Host is down")
(def-unix-error EHOSTUNREACH 113 "No route to host")
(def-unix-error EALREADY 114 "Operation already in progress")
(def-unix-error EINPROGRESS 115 "Operation now in progress")
(def-unix-error ESTALE 116 "Stale NFS file handle")
(def-unix-error EUCLEAN 117 "Structure needs cleaning")
(def-unix-error ENOTNAM 118 "Not a XENIX named type file")
(def-unix-error ENAVAIL 119 "No XENIX semaphores available")
(def-unix-error EISNAM 120 "Is a named type file")
(def-unix-error EREMOTEIO 121 "Remote I/O error")
(def-unix-error EDQUOT 122 "Quota exceeded")
)
;;;
;;; And now for something completely different ...
(emit-unix-errors)
#+irix
(setf (alien::heap-alien-info-sap-form
(info variable alien::alien-info 'unix-errno))
(int-sap (alien-funcall (extern-alien "__oserror" (function int)))))
;;; GET-UNIX-ERROR-MSG -- public.
;;;
(defun get-unix-error-msg (&optional (error-number unix-errno))
"Returns a string describing the error number which was returned by a
UNIX system call."
(declare (type integer error-number))
(if (array-in-bounds-p *unix-errors* error-number)
(svref *unix-errors* error-number)
(format nil "Unknown error [~d]" error-number)))
;;;; Lisp types used by syscalls.
(deftype unix-pathname () 'simple-string)
(deftype unix-fd () `(integer 0 ,most-positive-fixnum))
#+mach
(progn
(deftype unix-file-mode () '(unsigned-byte 16))
(deftype unix-pid () '(unsigned-byte 16))
(deftype unix-uid () '(unsigned-byte 16))
(deftype unix-gid () '(unsigned-byte 16)))
#-mach
(progn
(deftype unix-file-mode () '(unsigned-byte 32))
(deftype unix-pid () '(unsigned-byte 32))
(deftype unix-uid () '(unsigned-byte 32))
(deftype unix-gid () '(unsigned-byte 32)))
(defmacro syscall ((name &rest arg-types) success-form &rest args)
`(let ((result (alien-funcall (extern-alien ,name (function int ,@arg-types))
,@args)))
(if (minusp result)
(values nil unix-errno)
,success-form)))
;;; Like syscall, but if it fails, signal an error instead of returing error
;;; codes. Should only be used for syscalls that will never really get an
;;; error.
;;;
(defmacro syscall* ((name &rest arg-types) success-form &rest args)
`(let ((result (alien-funcall (extern-alien ,name (function int ,@arg-types))
,@args)))
(if (minusp result)
(error "Syscall ~A failed: ~A" ,name (get-unix-error-msg))
,success-form)))
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
(defmacro void-syscall ((name &rest arg-types) &rest args)
`(syscall (,name ,@arg-types) (values t 0) ,@args))
(defmacro int-syscall ((name &rest arg-types) &rest args)
`(syscall (,name ,@arg-types) (values result 0) ,@args))
;;; Unix-access accepts a path and a mode. It returns two values the
;;; first is T if the file is accessible and NIL otherwise. The second
;;; only has meaning in the second case and is the unix errno value.
(defconstant r_ok 4 "Test for read permission")
(defconstant w_ok 2 "Test for write permission")
(defconstant x_ok 1 "Test for execute permission")
(defconstant f_ok 0 "Test for presence of file")
(defun unix-access (path mode)
"Given a file path (a string) and one of four constant modes,
unix-access returns T if the file is accessible with that
mode and NIL if not. It also returns an errno value with
NIL which determines why the file was not accessible.
The access modes are:
r_ok Read permission.
w_ok Write permission.
x_ok Execute permission.
f_ok Presence of file."
(declare (type unix-pathname path)
(type (mod 8) mode))
(void-syscall ("access" c-string int) path mode))
;;; Unix-chdir accepts a directory name and makes that the
;;; current working directory.
(defun unix-chdir (path)
"Given a file path string, unix-chdir changes the current working
directory to the one specified."
(declare (type unix-pathname path))
(void-syscall ("chdir" c-string) path))
;;; Unix-chmod accepts a path and a mode and changes the mode to the new mode.
(defconstant setuidexec #o4000 "Set user ID on execution")
(defconstant setgidexec #o2000 "Set group ID on execution")
(defconstant savetext #o1000 "Save text image after execution")
(defconstant readown #o400 "Read by owner")
(defconstant writeown #o200 "Write by owner")
(defconstant execown #o100 "Execute (search directory) by owner")
(defconstant readgrp #o40 "Read by group")
(defconstant writegrp #o20 "Write by group")
(defconstant execgrp #o10 "Execute (search directory) by group")
(defconstant readoth #o4 "Read by others")
(defconstant writeoth #o2 "Write by others")
(defconstant execoth #o1 "Execute (search directory) by others")
(defun unix-chmod (path mode)
"Given a file path string and a constant mode, unix-chmod changes the
permission mode for that file to the one specified. The new mode
can be created by logically OR'ing the following:
setuidexec Set user ID on execution.
setgidexec Set group ID on execution.
savetext Save text image after execution.
readown Read by owner.
writeown Write by owner.
execown Execute (search directory) by owner.
readgrp Read by group.
writegrp Write by group.
execgrp Execute (search directory) by group.
readoth Read by others.
writeoth Write by others.
execoth Execute (search directory) by others.
It returns T on successfully completion; NIL and an error number
otherwise."
(declare (type unix-pathname path)
(type unix-file-mode mode))
(void-syscall ("chmod" c-string int) path mode))
;;; Unix-fchmod accepts a file descriptor ("fd") and a file protection mode
;;; ("mode") and changes the protection of the file described by "fd" to
;;; "mode".
(defun unix-fchmod (fd mode)
"Given an integer file descriptor and a mode (the same as those
used for unix-chmod), unix-fchmod changes the permission mode
for that file to the one specified. T is returned if the call
was successful."
(declare (type unix-fd fd)
(type unix-file-mode mode))
(void-syscall ("fchmod" int int) fd mode))
(defun unix-chown (path uid gid)
"Given a file path, an integer user-id, and an integer group-id,
unix-chown changes the owner of the file and the group of the
file to those specified. Either the owner or the group may be
left unchanged by specifying them as -1. Note: Permission will
fail if the caller is not the superuser."
(declare (type unix-pathname path)
(type (or unix-uid (integer -1 -1)) uid)
(type (or unix-gid (integer -1 -1)) gid))
(void-syscall ("chown" c-string int int) path uid gid))
;;; Unix-fchown is exactly the same as unix-chown except that the file
;;; is specified by a file-descriptor ("fd") instead of a pathname.
(defun unix-fchown (fd uid gid)
"Unix-fchown is like unix-chown, except that it accepts an integer
file descriptor instead of a file path name."
(declare (type unix-fd fd)
(type (or unix-uid (integer -1 -1)) uid)
(type (or unix-gid (integer -1 -1)) gid))
(void-syscall ("fchown" int int int) fd uid gid))
;;; Returns the maximum size (i.e. the number of array elements
;;; of the file descriptor table.
(defun unix-getdtablesize ()
"Unix-getdtablesize returns the maximum size of the file descriptor
table. (i.e. the maximum number of descriptors that can exist at
one time.)"
(int-syscall ("getdtablesize")))
;;; Unix-close accepts a file descriptor and attempts to close the file
;;; associated with it.
(defun unix-close (fd)
"Unix-close takes an integer file descriptor as an argument and
closes the file associated with it. T is returned upon successful
completion, otherwise NIL and an error number."
(declare (type unix-fd fd))
(void-syscall ("close" int) fd))
;;; Unix-creat accepts a file name and a mode. It creates a new file
;;; with name and sets it mode to mode (as for chmod).
(defun unix-creat (name mode)
"Unix-creat accepts a file name and a mode (same as those for
unix-chmod) and creates a file by that name with the specified
permission mode. It returns T on success, or NIL and an error
number otherwise."
(declare (type unix-pathname name)
(type unix-file-mode mode))
(void-syscall ("creat" c-string int) name mode))
;;; Unix-dup returns a duplicate copy of the existing file-descriptor
;;; passed as an argument.
(defun unix-dup (fd)
"Unix-dup duplicates an existing file descriptor (given as the
argument) and return it. If FD is not a valid file descriptor, NIL
and an error number are returned."
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
(declare (type unix-fd fd))
(int-syscall ("dup" int) fd))
;;; Unix-dup2 makes the second file-descriptor describe the same file
;;; as the first. If the second file-descriptor points to an open
;;; file, it is first closed. In any case, the second should have a
;;; value which is a valid file-descriptor.
(defun unix-dup2 (fd1 fd2)
"Unix-dup2 duplicates an existing file descriptor just as unix-dup
does only the new value of the duplicate descriptor may be requested
through the second argument. If a file already exists with the
requested descriptor number, it will be closed and the number
assigned to the duplicate."
(declare (type unix-fd fd1 fd2))
(void-syscall ("dup2" int int) fd1 fd2))
;;; Unix-fcntl takes a file descriptor, an integer command
;;; number, and optional command arguments. It performs
;;; operations on the associated file and/or returns inform-
;;; ation about the file.
;;; Operations performed on file descriptors:
(defconstant F-DUPFD 0 "Duplicate a file descriptor")
(defconstant F-GETFD 1 "Get file desc. flags")
(defconstant F-SETFD 2 "Set file desc. flags")
(defconstant F-GETFL 3 "Get file flags")
(defconstant F-SETFL 4 "Set file flags")
#+svr4
(defconstant F-GETOWN 23 "Get owner")
#+linux
(defconstant F-GETLK 5 "Get lock")
#-(or linux svr4)
#+svr4
(defconstant F-SETOWN 24 "Set owner")
#+linux
(defconstant F-SETLK 6 "Set lock")
#+linux
(defconstant F-SETLKW 7 "Set lock, wait for release")
#+linux
(defconstant F-SETOWN 8 "Set owner")
(defconstant FNDELAY #-osf1 #o0004 #+osf1 #o100000 "Non-blocking reads")
(defconstant FAPPEND #-linux #o0010 #+linux #o2000 "Append on each write")
(defconstant FASYNC #-(or linux svr4) #o0100 #+svr4 #o10000 #+linux #o20000
;; doesn't exist in Linux ;-(
#-linux (defconstant FCREAT #-(or hpux svr4) #o1000 #+(or hpux svr4) #o0400